You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Forge Motorsports

Set Descending Direction

   

8 Item(s)

  1. FORGE MOTORSPORT RECIRCULATING VALVE | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R FORGE MOTORSPORT RECIRCULATING VALVE | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R
    Sale

    FORGE MOTORSPORT RECIRCULATING VALVE | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R

    Product Description

    This will replace OEM part numbers 06H 145 710D, 06F 145 710G, & 06H 145 710 C

    Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CJXB, CZPA, and CJXC;US codes CPLA and CPPA) including Golf MK7 R

    This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp!

    This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

    We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

    In The Box:
    1 x FMDVMK7R Valve
    1 x Wiring Harness
    1 x Solenoid, Bracket, and Screws
    1 x Uprated Blue Spring
    10 x Cable Ties
    1 x 1000mm of 4mm Vacuum Tube
    1 x 5mm T Piece
    1 x Instructions
    1 x Forge Keyring and Sticker

    Regular Price: $399.00

    Special Price $359.00

    As low as: $339.00
  2. FORGE BLOW OFF VALVE BOV | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P FORGE BLOW OFF VALVE BOV | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P
    Sale

    FORGE BLOW OFF VALVE BOV | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P

    Product Description

    • Direct OEM replacement
    • Made from the highest quality Aircraft quality T6061 billet aluminium construction
    • Fully compatible with OEM electronics
    • Fully serviceable piston
    • Capable to 600HP (with uprated spring kit)
    • Utilising world leading springs for more precise operation and consistency
    • All internal and external components have been made in the UK
    • Pistons use heat stabilised Viton O-rings
    • Lubricated with high temperature Mobil1 grease
    • Fully serviceable and rebuildable in minutes
    • Unlike other valves on the market, ours produce no check engine lights (EML)
    • Improved dynamic throttle response
    • Consistent turbo boost & reduced turbo lag
    • Covered by the Forge Lifetime Warranty*

    This valve is designed to fit the FSI and TSI engines of the VAG group (VW, Audi, Seat, Skoda) listed below, including the 2011-2013 2.0l engine using the IHI Turbo.

    • 1.4T (with additional fitting kit FMBGFK3)
    • 1.8T
    • 2.0T

    Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB. We designed the slots in the body to cover a large surface area, allowing for a quick release of air, resulting in a unique sounding dumpvalve.

     

    This upgrade/replacement for your original equipment valve integrates seamlessly with the OEM electronics. Using a wiring harness and solenoid, both tested for each specific application, you can confidentially fit a Forge part knowing that there will be no fault codes, check engine lights, or performance issues with the vehicle!

    Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable.

    The OEM valve uses a rubber diaphragm and a plastic housing. Both of these materials, but especially the rubber is prone to failure. The rubber can stiffen and go brittle due to the heat from the engine, resulting in diaphragm splitting and boost leak.

    Our valve uses full billet alloy construction with a piston based internal design, meaning the issues with the OEM can never happen with ours! To give you even more peace of mind, we made the internals of our valve serviceable. We recommend doing this every 3 years or 20,000 miles, whichever comes first. However, if you don’t want to service your valve yourself you can order the kit and ship your valve back to us and we will carry out the service free of charge! Simply contact us to arrange the service!

    The OEM valve internals can also fail if you have your vehicle mapped as the rubber diaphragm is not always strong enough to cope with the increased boost pressure. We build our valves with a spring matched to the original pressure of the car, but include in the kit a spring strong enough to cope with a stage one remap. If you decide to increase the power even more you can guarantee the reliability of our valve by using this spring tuning kit!

    This valve was designed by our highly skilled engineers using CAD software to ensure that it will fit with every listed compatible vehicle with ease! 

    It is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis. Compared to competitors our valve has a much shorter overall installed height.

    The OEM part numbers we have replaced with our valve include:

    • 06H145710B
    • 06H145710C
    • 06H145710D
    • 06H145710F
    • 06H145710G

    Regular Price: $399.00

    Special Price $359.00

  3. FORGE RECIRCULATING VALVE | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P FORGE RECIRCULATING VALVE | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P
    Sale

    FORGE RECIRCULATING VALVE | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P

    Product Description

    Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)

    We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

    Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.

    This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak.

    Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location.

    The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products.

    Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB

     

    In The Box:
    1 x FMFSITVR Valve
    1 x Wiring Harness
    1 x Solenoid, Bracket, and Screws
    1 x PCV Adaptor Kit
    1 x Blue Spring (Uprated)
    10 x Cable Ties
    1 x 2000mm Length of 4mm Vac Hose
    1 x Instruction Booklet
    1 x Forge Keyring and Sticker

    If you are unsure if this product is suitable for your application, please contact us.

    Regular Price: $399.00

    Special Price $339.00

  4. FORGE MOTORSPORT BLOW OFF VALVE BOV | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R - Black FORGE MOTORSPORT BLOW OFF VALVE BOV | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R - Black
    Sale

    FORGE MOTORSPORT BLOW OFF VALVE BOV | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R - Black

    Product Description

    • Direct OEM replacement
    • Made from the highest quality Aircraft quality T6061 billet aluminium construction
    • Fully compatible with OEM electronics
    • Fully serviceable piston
    • Capable to 600HP (with uprated spring kit)
    • Utilising world leading springs for more precise operation and consistency
    • All internal and external components have been made in the UK
    • Pistons use heat stabilised Viton O-rings
    • Lubricated with high temperature Mobil1 grease
    • Fully serviceable and rebuildable in minutes
    • Unlike other valves on the market, ours produce no check engine lights (EML)
    • Improved dynamic throttle response
    • Consistent turbo boost & reduced turbo lag
    • Covered by the Forge Lifetime Warranty*

    Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered

    This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

    Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.

    Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

    This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

    ⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐

    ⭐  Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐

    ⭐  Easy installation and sounds fantastic! Money well spent ⭐

    In The Box:
    1 x FMDVMK7A Valve
    1 x Wiring Harness
    1 x Solenoid, Bracket, and Screws
    1 x Uprated Blue Spring
    10 x Cable Ties
    1 x 1000mm of 4mm Vacuum Tube
    1 x 5mm T Piece
    1 x Instructions
    1 x Forge Keyring and Sticker

     

    Regular Price: $399.00

    Special Price $350.00

  5. Forge Motorsport - VW, Audi, and SEAT Turbo Muffler Delete Pipe (EA888 Engine) Forge Motorsport - VW, Audi, and SEAT Turbo Muffler Delete Pipe (EA888 Engine)
    Sale

    Forge Motorsport - VW, Audi, and SEAT Turbo Muffler Delete Pipe (EA888 Engine)

    Product Description

    This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38

    On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.

    Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.

    Regular Price: $299.00

    Special Price $219.00

  6. Forge Motorsport Turbo Blanket - VW Golf MK7 / MK7.5 GTI & R, Audi S3 8V - Fits T4, T5, T25, GTX28, GTX30, EFR6258

    Product Description

    The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

    ·       Stainless Steel Rivets
    ·       Stainless Steel Fasteners
    ·       Carbon fabric Outer Shell
    ·       Calcium Magnesium Silicate Wool constructed Inner Core
    ·       High temperature silica fabric

    The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

    Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

    • T4
    • T5
    • T25
    • The Garrett GTX28 and GTX30 Range
    • Borg Warner EFR6258

    Interior Surface:

    ·       Max Temperature Rating: 2300°F/1260°C
    ·       Continuous Use Limit: 1832°F1000°C

    Exterior Surface:

    ·       Direct Contact Limit: 1800°F/982°C
    ·       Radiant Heat Limit: 2500°F/1371°C

    Complimentary Products

    Uprated Intercooler

    High Flow Discharge Pipe

    Carbon Fibre Induction Kit

    $169.00
  7. Forge Motorsport High Flow Inlet Hose - VW/Audi MQB Forge Motorsport High Flow Inlet Hose - VW/Audi MQB
    Sale

    Forge Motorsport High Flow Inlet Hose - VW/Audi MQB

    Product Description

    THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES

    The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

    ⭐ Excellent quality product & easy to fit ⭐

    The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.

    The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

    As with all Forge products, this hose comes with a lifetime warranty*

    Regular Price: $375.00

    Special Price $349.00

  8. Forge Motorsport Boost Hoses - Audi RS3 8V/TTRS 8S

    Product Description

    FMKT024 – Audi RS3 (8V chassis), and Audi TTRS (8S)

    A set of four boost hoses and air box coupler hose for the Audi RS3 and Audi TTRS - Please note the airbox hose (centre of the kit image) does not fit the DNWA and DAZA engine codes. This hose kit includes the intercooler inlet and outlet hoses (two largest hoses seen in the kit image), throttle body hose located at feed into alloy inlet manifold elbow (straight reducer seen in the kit image), and turbo outlet hose (two smallest hoses in the kit image, one being an alternative for the facelift 8V models).

    The Forge silicone hoses in this kit are Fluorosilicone lined to prevent oil vapour penetration throughout the inner hose wall. Fluorosilicone lining also renders the kit suitable to be used with either modern long-life coolants or Organic Acid Technology coolants (O.A.T.).

    The use of a Fluorosilicone lining ensures that Forge silicone hoses are the clear market leader.

    This durable Forge Motorsport silicone hose kit has been designed to withstand pressures experienced in both tuned and remapped Audi RS3 and TTRS engines, long outlasting the original hoses. This high quality hose kit is covered by the limited lifetime Forge Motorsport warranty, keeping you on the road and ahead of the pack!

    This set of hoses is available in red, blue or black finish, an added aesthetic option for this high quality hose kit.

    *T&C's Apply

    $365.00
Set Descending Direction

   

8 Item(s)