You have no items in your shopping cart.

Product was successfully added to your shopping cart.

IE MK6 GTI (2.0TSI) HIGH-FLOW COLD AIR INTAKE KIT

SKU : IEINCC2

Enter email address below to be notified when available In stock This product is located at an Australian located warehouse and will be shipped immediately after we process your order.

Register your email address below to receive an email as soon as this becomes available again.


IE MK6 GTI (2.0TSI) HIGH-FLOW COLD AIR INTAKE KIT

We'll notify you when this product is in stock. We don't share your address with anybody else.


Your notification has been registered. We will notify you when this product is back in stock. Close
$769.00
Ex GST : $699.09
×

Details

ADD POWER, TORQUE, AND SOUND

The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine. 

LEADING FEATURES

  • INCREASED HORSEPOWER & TORQUE
  • ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
  • HIGH-FLOW BELLMOUTH
  • MASSIVE OVER-SIZED AIR FILTER
  • BLACK POWDER COAT FINISH
  • EASY INSTALL WITH NO MODIFICATIONS
  • USES FACTORY MOUNTING GROMMETS & HARDWARE
  • HEAT SHIELDING & DIRECTED AIR FLOW
  • REINFORCED SILICONE HOSES
  • FITS DSG AND MANUAL TRANSMISSIONS

YOUR BUILD DESERVES THE BEST

Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.

STOCK-LIKE DIRECT FIT

This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.

HIGH-FLOW VELOCITY STACK

The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!

THERMAL BLOCKING HEAT SHIELD

The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.

DO YOU NEED AN SAI KIT?

The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.

EASY INSTALLATION

Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.

CLICK HERE to view and download the Cold Air Intake install guide

Additional Information

Style No
Material No
Fitment No

Shipping and delivery of products will depend upon availability. We will provide this information to you by marking the products on the Website as:

  “In Stock” - This product can be collected from our Australian located warehouse or shipped immediately after we process your order.
  “Direct Ship” - This item is sourced from our supplier and we will ship directly to you after we process your order.
  “Drop Ship” - This item is sourced from our supplier and will be sent directly from the supplier to your door after the order is processed.

RETURN POLICY

VW Central PTY. LTD. will accept returns for unused products within 14 days from the time that the order was placed. If a product is returned within 14 days of the original purchase date you are eligible for a refund to the original payment method used. Any returns made outside the 14 day return policy time frame may qualify for a VW Central in store credit refund only (Note: Non-stocked items are NOT returnable after 14 days).

PRODUCT WARRANTY

The standard warranty policy is 12 months from the delivery date unless otherwise stated. VW Central PTY. LTD. will only warranty manufacturer related defects NOT related to installer error, modification, improper use or vehicle failure.

All warranty claims will be resolved at the discretion of VW Central. VW Central should be notified first of all claims in order to resolve the issue as soon as possible.

Please make your selection carefully as we are unable to accept products for refund or exchange if you simply change your mind or if you made an incorrect purchases.

Please note our vehicle part finder is designed to be a useful tool to help find parts that fit your vehicle, this part finder should be used as a guide. If you are unsure as to whether a part fits your vehicle, please contact us.

Our supplier allows us to return your purchase within 5 days of receipt if you are not satisfied with the fitment & quality for it's intended model and purpose.

  • The item must be still in their original packaging.
  • A 20% restocking fee will apply.
  • All approved items must be returned to our supplier unopened and unused. - Correct packaging must be used when sending the item back.
  • Our supplier will not refund any items that have been damaged during transit during their return to our supplier.
  • Once the item has been received back at our supplier in satisfactory condition a refund minus a 20% re-stocking fee will apply. The original shipping cost will not be refunded.

Should you have any questions related to any Maxton Design product, please contact us prior to purchase and our team would be more than happy to assist you.

  • Australian Owned
  • 100% Fitment Guarantee
  • Genuine Quality Brands