You have no items in your shopping cart.

Product was successfully added to your shopping cart.

IE MQB 2.0T/1.8T Gen 3 Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

SKU : IEINCI11

Availability: In stock This product is located at an Australian located warehouse and will be shipped immediately after we process your order.

Register your email address below to receive an email as soon as this becomes available again.


IE MQB 2.0T/1.8T Gen 3 Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

We'll notify you when this product is in stock. We don't share your address with anybody else.


Your notification has been registered. We will notify you when this product is back in stock. Close
$759.00
Ex GST : $690.00

ENDS IN:

$759.00

Details

LEADING FEATURES

  • Gain over 10+ horsepower and torque with tuning
  • Available with optional high gloss carbon fiber lid
  • Adds aggressive motorsport turbo and engine sound
  • Full-width air inlet spans entire radiator support
  • High-flow built in velocity stack & 5″ air filter
  • 3.5″ turbo inlet pipe and silicone – removes factory restrictions
  • Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
  • Through-flow flat surface 3-ply couplers
  • Perfect fitment by utilizing factory airbox mounts
  • Black powder coated inlet pipe and heat shield
  • Stealth coolant line included at no extra cost
  • Works with/without SAI – no need to buy an extra kit

PRODUCT DETAILS

We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:

POWER GAINS


On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.

IE MK7 intake velocity stack
IE MK7 intake modular design

MODULAR DESIGN


At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.

PERFECT FITMENT & APPEARANCE


IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.

IE MK7 intake development
IE MK7 intake easy install

FULLY INCLUSIVE KIT


Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.

MOTORSPORT PERFORMANCE & SOUND


Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.

IE MK7 intake golf R

DISCONTINUED PART NUMBERS & V1 INTAKE: 

With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.
  • IEINCI2 -MQB TSI Cold Air Intake (Open FIlter)
  • IEINCI1 -MQB TSI Carbon Fiber Cold Air Intake
  • IEINCI3 -Carbon Fiber Inlet Pipe 

VEHICLE FITMENT GUIDE

MAKE MODEL YEAR ENGINE(S)

VW

GTI

MK7-MK7.5 2015-2019

2.0T

VW

Golf R

MK7-MK7.5 2015-2019

2.0T

VW

Golf

MK7-MK7.5 2015-2019

2.0T & 1.8T

VW

GLI

MK7 2019

2.0T

VW

Golf Alltrak

MK7-MK7.5 2015-2019

2.0T & 1.8T

Audi

A3

8V 2015-2019

2.0T & 1.8T

Audi

S3

8V 2015-2019

2.0T

Note: Incompatible with Audi A3 2.0 TFSI (8.5V) models equipped with a MAF sensor.

Additional Information

Style No
Material No
Fitment No

Shipping and delivery of products will depend upon availability. We will provide this information to you by marking the products on the Website as:

  “In Stock” - This product can be collected from our Australian located warehouse or shipped immediately after we process your order.
  “Direct Ship” - This item is sourced from our supplier and we will ship directly to you after we process your order.
  “Drop Ship” - This item is sourced from our supplier and will be sent directly from the supplier to your door after the order is processed.

RETURN POLICY

VW Central PTY. LTD. will accept returns for unused products within 14 days from the time that the order was placed. If a product is returned within 14 days of the original purchase date you are eligible for a refund to the original payment method used. Any returns made outside the 14 day return policy time frame may qualify for a VW Central in store credit refund only (Note: Non-stocked items are NOT returnable after 14 days).

PRODUCT WARRANTY

The standard warranty policy is 12 months from the delivery date unless otherwise stated. VW Central PTY. LTD. will only warranty manufacturer related defects NOT related to installer error, modification, improper use or vehicle failure.

All warranty claims will be resolved at the discretion of VW Central. VW Central should be notified first of all claims in order to resolve the issue as soon as possible.

Please make your selection carefully as we are unable to accept products for refund or exchange if you simply change your mind or if you made an incorrect purchases.

Please note our vehicle part finder is designed to be a useful tool to help find parts that fit your vehicle, this part finder should be used as a guide. If you are unsure as to whether a part fits your vehicle, please contact us.

Our supplier allows us to return your purchase within 5 days of receipt if you are not satisfied with the fitment & quality for it's intended model and purpose.

  • The item must be still in their original packaging.
  • A 20% restocking fee will apply.
  • All approved items must be returned to our supplier unopened and unused. - Correct packaging must be used when sending the item back.
  • Our supplier will not refund any items that have been damaged during transit during their return to our supplier.
  • Once the item has been received back at our supplier in satisfactory condition a refund minus a 20% re-stocking fee will apply. The original shipping cost will not be refunded.

Should you have any questions related to any Maxton Design product, please contact us prior to purchase and our team would be more than happy to assist you.

  • Australian Owned
  • 100% Fitment Guarantee
  • Genuine Quality Brands

Also Purchased