You have no items in your shopping cart.

Product was successfully added to your shopping cart.

FORGE BLOW OFF VALVE BOV | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P

SKU : FMFSITAT

Enter email address below to be notified when available In stock This product is located at an Australian located warehouse and will be shipped immediately after we process your order.

Register your email address below to receive an email as soon as this becomes available again.


FORGE BLOW OFF VALVE BOV | 2.0T FSI | TSI - VW MK6 R / MK5 & 6 GTI / Scirocco R / Audi S3 8P

We'll notify you when this product is in stock. We don't share your address with anybody else.


Your notification has been registered. We will notify you when this product is back in stock. Close

Regular Price: $399.00

Special Price $359.00

Ex GST : $326.36
×

Details

Product Description

  • Direct OEM replacement
  • Made from the highest quality Aircraft quality T6061 billet aluminium construction
  • Fully compatible with OEM electronics
  • Fully serviceable piston
  • Capable to 600HP (with uprated spring kit)
  • Utilising world leading springs for more precise operation and consistency
  • All internal and external components have been made in the UK
  • Pistons use heat stabilised Viton O-rings
  • Lubricated with high temperature Mobil1 grease
  • Fully serviceable and rebuildable in minutes
  • Unlike other valves on the market, ours produce no check engine lights (EML)
  • Improved dynamic throttle response
  • Consistent turbo boost & reduced turbo lag
  • Covered by the Forge Lifetime Warranty*

This valve is designed to fit the FSI and TSI engines of the VAG group (VW, Audi, Seat, Skoda) listed below, including the 2011-2013 2.0l engine using the IHI Turbo.

  • 1.4T (with additional fitting kit FMBGFK3)
  • 1.8T
  • 2.0T

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB. We designed the slots in the body to cover a large surface area, allowing for a quick release of air, resulting in a unique sounding dumpvalve.

 

This upgrade/replacement for your original equipment valve integrates seamlessly with the OEM electronics. Using a wiring harness and solenoid, both tested for each specific application, you can confidentially fit a Forge part knowing that there will be no fault codes, check engine lights, or performance issues with the vehicle!

Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable.

The OEM valve uses a rubber diaphragm and a plastic housing. Both of these materials, but especially the rubber is prone to failure. The rubber can stiffen and go brittle due to the heat from the engine, resulting in diaphragm splitting and boost leak.

Our valve uses full billet alloy construction with a piston based internal design, meaning the issues with the OEM can never happen with ours! To give you even more peace of mind, we made the internals of our valve serviceable. We recommend doing this every 3 years or 20,000 miles, whichever comes first. However, if you don’t want to service your valve yourself you can order the kit and ship your valve back to us and we will carry out the service free of charge! Simply contact us to arrange the service!

The OEM valve internals can also fail if you have your vehicle mapped as the rubber diaphragm is not always strong enough to cope with the increased boost pressure. We build our valves with a spring matched to the original pressure of the car, but include in the kit a spring strong enough to cope with a stage one remap. If you decide to increase the power even more you can guarantee the reliability of our valve by using this spring tuning kit!

This valve was designed by our highly skilled engineers using CAD software to ensure that it will fit with every listed compatible vehicle with ease! 

It is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis. Compared to competitors our valve has a much shorter overall installed height.

The OEM part numbers we have replaced with our valve include:

  • 06H145710B
  • 06H145710C
  • 06H145710D
  • 06H145710F
  • 06H145710G

Additional Information

Style No
Material No
Fitment No

Shipping and delivery of products will depend upon availability. We will provide this information to you by marking the products on the Website as:

  “In Stock” - This product can be collected from our Australian located warehouse or shipped immediately after we process your order.
  “Direct Ship” - This item is sourced from our supplier and we will ship directly to you after we process your order.
  “Drop Ship” - This item is sourced from our supplier and will be sent directly from the supplier to your door after the order is processed.

RETURN POLICY

VW Central PTY. LTD. will accept returns for unused products within 14 days from the time that the order was placed. If a product is returned within 14 days of the original purchase date you are eligible for a refund to the original payment method used. Any returns made outside the 14 day return policy time frame may qualify for a VW Central in store credit refund only (Note: Non-stocked items are NOT returnable after 14 days).

PRODUCT WARRANTY

The standard warranty policy is 12 months from the delivery date unless otherwise stated. VW Central PTY. LTD. will only warranty manufacturer related defects NOT related to installer error, modification, improper use or vehicle failure.

All warranty claims will be resolved at the discretion of VW Central. VW Central should be notified first of all claims in order to resolve the issue as soon as possible.

Please make your selection carefully as we are unable to accept products for refund or exchange if you simply change your mind or if you made an incorrect purchases.

Please note our vehicle part finder is designed to be a useful tool to help find parts that fit your vehicle, this part finder should be used as a guide. If you are unsure as to whether a part fits your vehicle, please contact us.

Our supplier allows us to return your purchase within 5 days of receipt if you are not satisfied with the fitment & quality for it's intended model and purpose.

  • The item must be still in their original packaging.
  • A 20% restocking fee will apply.
  • All approved items must be returned to our supplier unopened and unused. - Correct packaging must be used when sending the item back.
  • Our supplier will not refund any items that have been damaged during transit during their return to our supplier.
  • Once the item has been received back at our supplier in satisfactory condition a refund minus a 20% re-stocking fee will apply. The original shipping cost will not be refunded.

Should you have any questions related to any Maxton Design product, please contact us prior to purchase and our team would be more than happy to assist you.

  • Australian Owned
  • 100% Fitment Guarantee
  • Genuine Quality Brands