Currently Shopping by
-
performance:
Engine
Exhaust
-
Brands:
CTS Turbo
Leyo Motorsport
XFORCE
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Audi - CTS Turbo - Leyo Motorsport - XFORCE
XFORCE - VW GOLF MK6 R / AUDI S3 8P - 3" STAINLESS STEEL DUMP PIPE & CAT
Description
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reduced to 3″
- Flex bellows before hanger
- 100 cell high flow performance catalytic converter
- Designed to fit to factory cat back systems
- Requires ECU tuning
Fits the following;
- Audi 8P S3
- Audi 8P A3 2.0T
- Golf MK6 R
Part No: ES-VW07-KITB Vehicle Model: A3, GOLF R, S3 Diameter [in]: 3 Material: Stainless Steel Regular Price: $1,000.00
Special Price $800.00
CTS TURBO B8.5 S4, S5, Q5, SQ5; C7.5 A6, A7, Q7 3.0T SUPERCHARGER PULLEY – BOLT ON STYLE
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
$249.00
XFORCE Resonator Delete Kit - VW MK7/MK7.5 GOLF R & AUDI S3 8V
XForce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf R and Audi 8V S3 platforms. Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.
Features:• Replaces the factory resonator on stock cat-back exhaust assembly with our high flow exhaust section.
• Adds a nice deep exhaust note without the need for replacing the entire exhaust system.
• Increase exhaust sound
• Made from durable T304 Stainless Steel.
• Stainless steel exhaust band clamps included.
• Installs quickly using simple hand tools.
• Completely reversible install.
NOTE: compatible with aftermarket downpipes.
Regular Price: $228.00
Special Price $195.00
XFORCE - Facelift 8V RS3 Sedan - Stainless Steel Cat Back Exhaust System with Varex
Twin 2.5" to 3" 304 Stainless Steel Cat Back Exhaust System With Varex
Features
- 3″ Brushed finish stainless steel pipe work
- Hot Dog resonator centre
- Polished Varex R series rear muffler
- Quad 4″ polished stainless tip outlet
Regular Price: $2,650.00
Special Price $2,120.00
LEYO - AUDI 8V.1/8V.2 RS3 THROTTLE PIPE (2 METH BUNG)
Description:
Leyo Motorsport’s new RS3 8V aluminum Throttle Pipe replaces the plastic OE pipe in between the throttle body and intercooler.
For those RS3 owners that is tuning your car to the max, Leyo Motorsport Throttle Pipe for the 8V RS3 provides you with not one, but two water methanol bung. Bent aluminum piping provides smoother air flow for greater efficiency.
Simple bolt on part with no modification necessary to the vehicle.
Specifications:-
2x WMI bung.
-
Bent aluminum piping with black powder coating.
-
Direct bolt on, no modification necessary.
Regular Price: $250.00
Special Price $200.00
-
LEYO - HIGH FLOW TURBO INLET PIPE
Description:
The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, we’ve created our own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, we’ve manufactured what we believe to be one of our best and most important performance product, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. We’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle.
Be sure you’re quick to order as demand is currently through the wastegate.
Specifications:
-
Full aluminium tubing.
-
CNC Aluminum OEM neck for secure fitment.
-
Fits all Air Intake system on the market.
-
Smooth, more linear power gains.
-
Larger than the OEM unit for increased air flow.
-
Simple installation.
-
Powder coated & laser etched logo.
-
Race Track Proven.
$210.00-
VW GOLF R MK7 & MK7.5 2013- 3" STAINLESS STEEL Downpipe w/ Catalytic Converter OR CAT BYPASS (DE-CAT)
COMPATIBLE WITH FACTORY VW CATBACK SYSTEMS
Brand: XForce Exhaust Product Code: ES-VW09-KITB Shipping: Usually ships in 1-3 days Regular Price: $1,200.00
Special Price $960.00
XFORCE - Stainless Steel 3″ Cat Back Exhaust System for S3 8V Sedan
Part No: ESAS3SVKCS RRP: $2,120.00 Diameter [in]: 3 Material: Stainless Steel FEATURES; 3″ Pipe work Brushed finish stainless steel pipe work Hot Dog resonator Polished Varex Race rear muffler Quad 4″ polished stainless tip outlet Installation instructions Download Installation InstructionsRegular Price: $2,400.00
Special Price $1,920.00
XFORCE - AUDI PFL RS3 8V SECONDARY CAT DELETE KIT
Hand Crafted from 3″ T304 Stainless SteelRegular Price: $275.00
Special Price $233.75
XFORCE - Facelift 8V RS3 and 8S TTRS 2.5T 4" Catless & 200 CEL Cat Downpipe
Dump-Pipe & Cat Kit Part No: ESRS317KITB RRP: $1,350.00 Diameter [in]: 4 Material: Stainless Steel Suppliers Product Group: Dump and Cat FEATURES 304 stainless steel Non Polished 4″ – 3″ pipe work Stainless steel flex bellows 100 cell high flow metallic race cat Tunning pipe 3″ to twin oem size adaptor pipe Fitting kit suppliedRegular Price: $1,350.00
Special Price $1,147.50
SAFE & SECURE SHOPPING
