The IE Polymer Air Intake System delivers performance, sound, and style to your Audi B9/B9.5 A4 or A5 2.0T engine. Our specialty polymer construction maintains low intake air temps and brings an affordable motorsport design to your engine bay. Enjoy easy power gains and turbo noise without sacrificing quality.
Currently Shopping by
-
performance:
Engine
Exhaust
Turbo
-
Brands:
Integrated Engineering
XFORCE
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Audi - Integrated Engineering - XFORCE
IE VW/AUDI DSG (DQ250) Transmission Tune | Fits VW MK6 GTI MK6 R & Scirocco R, Jetta, GLI, & Audi 8J TTS
SHIFT FASTER, DRIVE FASTER The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2.0T TSI into a fully rounded performance monster. LEADING FEATURES Lightning fast gear shifts Higher shift points of 6800 RPM Kick down in manual mode eliminated Lag time reduced when starting off in first gear Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000 Drive shift mapping entirely reworked with an enthusiast in mind Flashed directly through OBD-II Port (No TCU removal required) Works flawlessly with an IE ECU tune Increased clutch pressure on tap for higher torque without slip Temperature protection remains for safety Gear hunting reduced Gearbox “Torque Limiters” removed WHAT DOES A DSG TRANSMISSION TUNE DO? The IE DSG Tune for the MK6 2.0T TSI has been carefully set up to make the car way more fun to drive. It completely reworks the shift point mapping in both drive and sport. The transmission will no longer lug the engine in drive mode. Clutch clamping forces are increased so the transmission can safely handle much more power. Shifts are much, much faster taking time directly off the 0-60 and ¼ mile times. ONE TUNE FOR ALL STAGES IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added from the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. USER ADJUSTABLE LAUNCH CONTROL The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! Available Launch Control RPMs: 3200 RPM 3400 RPM 3600 RPM 3800 RPM 4000 RPM IE DSG TUNE TECHNICAL FEATURES HIGHER SHIFT POINTS Utilize the whole powerband of your 2.0 TSI engine without the DSG interfering and shifting early. DRIVE MAPPING REWORKED The MK6 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode. INCREASED CLUTCH PRESSURE Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. FLASHED THROUGH OBD-II PORT There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes. TAKE-OFF LAG REDUCED The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop. MULTIPLE LAUNCH RPMS The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain FLAWLESS OPERATION WITH IE ECU TUNES The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI engine and transmission. VEHICLE FITMENT VW - MK6 GTI 2010-2014 (MK6) 2.0T EA888 Gen1/2 TSI engines VW - MK6 Jetta 2011-2013.5 (MK6) 2.0T EA888 Gen1/2 TSI engines* VW - MK6 GLI 2011-2013.5 (MK6) 2.0T EA888 Gen 1/2 TSI engines* AUDI - TTS 2008-2015 (8J) 2.0T TFSI EA113 engines *This DSG calibration is for 2.0T TSI EA888 Gen 1 & 2 engines only. Many Jetta and GLI models are equipped with a new engine variation (EA888 Gen 3) after 2013.5 and later. This tune does NOT support Gen 3 model engine TCUs. Please verify if your engine is an EA888 Gen 1/2 2.0T TSI or EA888 Gen 3 2.0T TSI tune before ordering. IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.Regular Price: $929.00
Special Price $875.00
IE Audi B9 A4 & A5 Cold Air Intake - Fits Cars With NO MAF ONLY
INCREASE POWER AND SOUND WITH A COLD AIR INTAKE
The IE Audi B9 A4 & A5 2.0T Cold Air Intake is the perfect addition to any engine bay. Give your Audi added horsepower, torque, snappier throttle response, and an aggressive sound. Typical peak gains from our CAI are roughly 10-20 Horsepower and Torque.
POWER GAINS
The ram air design, velocity stack, and massive 55-inchfilter inlet help deliver the most HP possible from a cold intake system.
Expect peak gains of 10-20+HP/TQ on tuned engines.INCLUDED IN THE B9 IE CAI KIT
- IE Intake velocity stack & heatshield assembly
- IE Silicone turbo inlet pipe assembly
- IE 5” inlet performance air filter
- IE Turbo heat shield
- All necessary hardware (clamps, nuts, bolts, etc)
INCREASED AIR FLOW
This Intake delivers an impressive flow increase to feed your turbo. More cold air flow means more power; especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.
DESIGN DETAILS
IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your A4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.
HIGH-FLOW VELOCITY STACK
Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.
CUSTOM HEAT SHIELD
IE uses a three piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay. A second heat shield is mounted above the turbocharger to further protect against power robbing heat off the exhaust and turbo.
PERFECT FITMENT
This Intake fits B9 Audi A4 and A5 without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle free fit. Additionally, the stock rubber mounts allow for engine movement which keeps intake components from getting damaged.
CLASSY AND CLEAN APPEARANCE
Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.
EASY INSTALLATION
Installation is a quick and easy install with basic tools. The process should take around an hour for most enthusiasts. CLICK HERE to view and download the IE B9 Cold Air Intake Install Guide.
INSTALL OVERVIEW VIDEO
DYNO POWER RESULTS
The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B9 A4 2.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car.
HORSEPOWER & TORQUE DYNO CHART
HORSEPOWER & TORQUE POWER GAINS OVER STOCK
VEHICLE FITMENT
- Audi - A4 2015+ (B9) 2.0T
- Audi - A5 2015+ (B9) 2.0T
- Audi - A4 Allroad 2015+ (B9) 2.0T
This intake does not fit cars that have a MAF housing/sensor.
$655.00
IE AUDI 2.0T TSI GEN 3 PERFORMANCE ECU TUNE | FITS AUDI B9 A4 & A5
AUDI B9 2.0T TUNE FEATURES
- Maximize horsepower & torque gains
- Easily and quickly tune your car at home
- Retain factory reliability
- Installs via IE POWERlink Tool
- Upgrade tunes at any time with no fees
- Easy octane switching 91, 93, & 104
- Simple data logging
- Return to stock anytime
- Improved throttle response
- Increased rev limiter
- Remove top speed limiter
HOW TO TUNE YOUR B9 A4 or A5
IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!
WHAT DOES THE IE AUDI B9 ECU TUNE DO?
Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!
AVAILABLE AUDI 2.0T STAGES
The IE Stage 1 Audi B9 A4 or A5 TSI tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware or to get the most out of your installed intake and intercooler. In a matter of minutes, your new ECU Tune will deliver a massive boost in performance.
Stage 1 recommended hardware
-IE Cold Air Intake
-IE Intercooler
Looking to maximize the performance of your stock engine and turbo? IE Stage 2 Upgrade fine-tunes the ECU to match installed aftermarket hardware allowing the turbocharger to breath free and improve power gains across the powerband. This is the maximum power available from a stock turbo car.
Stage 2 required & recommended hardware
-IE Performance Downpipe (required)
-IE Cold Air Intake (recommended)
-IE Intercooler (highly recommended)POWER GAINS
EASY INSTALLATION - TUNE FROM HOME
Required to flash your tune, The IE POWERlink cable gives you control to unlock your engine’s true potential from your own garage or driveway. Quickly reflash your B9 Audi with your choice of ECU Stage through the cars OBD-II port. Upgrade tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via data-logging.
VEHICLE FITMENT
- Audi - B9 A4 Quattro 2016+ with 2.0T engine*
- Audi - B9 A5 Quattro 2016+ with 2.0T engine*
- Audi - B9 A4 Quattro Allroad 2017+ with 2.0T engine*
*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.
Regular Price: $929.00
Special Price $900.00
IE Polymer Air Intake System For Audi B9/B9.5 A4 & A5 2.0T
Description:
HIGH-QUALITY
POLYMER
CONSTRUCTIONFLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGNUP TO
+10-20HP
POWER YOU CAN FEELLEADING FEATURES
- Rotomold polymer for superior heat resistance
- Up to 10-20HP over stock (with software)
- Increased turbo & engine sounds
- Massive 5" air filter for excellent flow
- Integrated velocity stack for smooth air transitions
- High pressure & low pressure air zones
- Factory style mounts for reliable & easy installation
- All stainless hardware
- Powder-coated aluminum filter plate & velocity stack
- Stainless laser-etched logo plate
THE QUALITY POLYMER INTAKE
This cold air intake is manufactured from a high-quality rotomold procedure that produces a superior plastic material with consistent wall thickness, strong corners, and excellent heat resistance. Enjoy a proper motorsport-designed intake system without compromise.
PERFORMANCE FIRST
The internal volume of the intake and its complex shapes are the results of application-specific engineering for the Audi B9 platform. Every inch has been performance designed to feed your turbocharger with the most airflow possible.
THROTTLE DOWN, SOUND ON
The stock airbox on your Audi A4 or A5 2.0T has been manufactured to silence all engine and turbo sounds at any performance cost. Upgrading your air system with an IE polymer intake will release a symphony of engine throttle, spool, and blow-off sounds that will be music to your ears.
MULTIPLE PRESSURE ZONES
This intake features high and low pressure zones to feed the turbocharger and engine demands for any power goal. The majority of fresh air supply is supplied to the filter from the grill. If additional air demands are required, the intake will pull low-pressure air through the filter cover as needed.
BUILT-IN VELOCITY STACK
The integrated velocity stack smooths the airflow from the large filter into the charge system with excellent laminar properties. This powerful design detail results in a very high inertia flow with reduced drag and power-robbing turbulence at the critical point as air enters the turbocharger.
PRECISION DESIGN
3D scanning tools are leveraged to create a high-resolution digital environment allowing our engineers to take advantage of all available space for a complete performance design while ensuring a hassle-free install.
VEHICLE FITMENT GUIDE
MAKE MODEL YEAR ENGINE AUDI
A4
2017-2024 (B9/B9.5)
2.0T Turbocharged
AUDI
A5
2018-2024 (B9/B9.5)
2.0T Turbocharged
NOTE: This IE intake system does not fit ROW vehicle engines equipped with a MAF sensor. Please verify before ordering.
$888.00
IE B9 A4 & A5 Performance Catted Downpipe
Description:
LEADING FEATURES
- Excellent power gains with matching Stage 2 Tune
- Cast sections ensure maximum flow
- Stainless steel and TIG welded for a gorgeous fit and finish
- True 76mm without necking down to OE sizing at CAT
- High flow 200 cell CAT for full power and reduced pollutants
- Tuned resonator keeps highway drone to a minimum
- Direct bolt-on fitment
The IE B9 A4 & A5 Catted Downpipe is engineered to completely reduce turbocharger back pressure and increase turbo spool required for the calibrations of a stage 2 ECU tune. The combination of a performance downpipe and ECU tune together unlocks the full performance potential of your stock turbocharger and engine, delivering 97 horsepower over stock. Get ready to experience addictive power gains across the entire RPM range and an aggressive exhaust growl you are bound to love.
ADVANCED SOUND TUNING
IE engineers elected to use a resonator in the B9 A4 & A5 exhaust. The result was a much better sounding exhaust overall. The factory cat back has a very unpleasant rasp when used with a downpipe which does not have a resonator. As IE engineers are true enthusiasts as well, it was very important that the exhaust also sounded great. Check out the video to hear stock vs. IE sound clips.
*All sound clips are on a Stage 2 vehicle with IE cold air intake and intercooler installed. Only the downpipe was changed, no modifications were made to the factory installed catback.
HIGH-FLOW CATALYST
IE’s performance downpipe includes a high-flow 200 cell per inch metal matrix catalyst located as close to the turbo as possible. Metal matrix catalysts are higher performance because the matrix web is thinner, allowing higher flow in the same size. Our catalyst is also a very large diameter, allowing a large flow area and maximum power. By being placed close to the turbo, emissions and unwanted unpleasant smells are greatly reduced.
QUALITY CAST SECTIONS
Typical aftermarket downpipes use bends or cuts to form the shape of the downpipe; this allows the use of larger piping, but sacrifices flow and often times fitment. Using specialized 3D scanners and software, IE engineers can design odd shapes and sizes to maximize flow and conform into tight spaces without any sacrifices. To accomplish these shapes, sections of the dowpipe are cast manufactured from the digital models. The result is an incredibly high-quality performance unit with a perfect fit and beautiful finish.
Regular Price: $1,402.00
Special Price $1,389.95
XFORCE Resonator Delete Kit - VW MK7/MK7.5 GOLF R & AUDI S3 8V
XForce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf R and Audi 8V S3 platforms. Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.
Features:• Replaces the factory resonator on stock cat-back exhaust assembly with our high flow exhaust section.
• Adds a nice deep exhaust note without the need for replacing the entire exhaust system.
• Increase exhaust sound
• Made from durable T304 Stainless Steel.
• Stainless steel exhaust band clamps included.
• Installs quickly using simple hand tools.
• Completely reversible install.
NOTE: compatible with aftermarket downpipes.
Regular Price: $228.00
Special Price $195.00
XFORCE - Facelift 8V RS3 Sedan - Stainless Steel Cat Back Exhaust System with Varex
Twin 2.5" to 3" 304 Stainless Steel Cat Back Exhaust System With Varex
Features
- 3″ Brushed finish stainless steel pipe work
- Hot Dog resonator centre
- Polished Varex R series rear muffler
- Quad 4″ polished stainless tip outlet
Regular Price: $2,650.00
Special Price $2,120.00
IE MQB VW MK7, Mk7.5 Golf R & Audi A3, S3, TT, TTS Performance Cast Downpipe (AWD)
• Proven performance gains for Stage 2 power levels• 76mm (3 inch) tubing replaces restrictive 60mm factory tubing
• Bolt on fitment - no hassle or poorly fitting parts when you choose IE
• Constructed of 304 stainless long-lasting and high-quality material
• Thick turbo flange - prevents leaks and warping
• High flow 200 cell catalytic converter - full power with reduced pollution and smell
• Metal matrix catalytic structure -• OEM style flex section - allows for more adjustment and won’t fail
• All inclusive kit - downpipe, midpipes, all hardware
• TIG welded construction - equates to long lasting welds that are less likely to fail
$1,599.00
IE Performance Downpipe for Audi 2.5 TFSI Engines | Fits 8V RS3 & 8S TTRS
RS3 & TTRS DOWNPIPE FEATURES:
- Required upgrade for Stage 2 power levels
- Unrestricted 3.5" minimum size tubing
- Bolt on fitment - no hassle, modifications, or poorly fitting parts
- Constructed of high-quality 304 stainless
- Thick cast & CNC machined turbo flanges for no leaks
- High-flow metal matrix 200 cell catalytic converter
- Reliable leak-free OEM style flex section
- Y-Pipe adapter available for stock catback
CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.
GOING STAGE 2 ON YOUR 2.5T?
Adding an Stage 2 ECU Tune and IE Downpipe to your Audi RS3 or TTRS is the ultimate choice power adder on the stock turbo & engine! Offering an aggressive and unique motorsport sound from your 5 cylinder turbo engine with complete unrestricted air flow for unmatched maximum power. Enjoy proven performance gains and leading features such as bolt-on direct fit install, long-life construction, cast sections, and amazing sound.
STOCK DOWNPIPES ROB HORSEPOWER
Your 2.5T engine is capable of supercar level horsepower on the stock engine and turbo reliably with a Stage 2 Tune alone! However, the factory installed downpipe is designed for maximum emissions and economy, not for power. This design is riddled with small piping, harsh bends, and power sucking restrictions that limit your power gains to only Stage 1 Tune levels. In order to correct that, a true performance downpipe is required to open up the exhaust flow and allow the turbo to spin freely!
MAXIMUM FLOW DOWNPIPE
IE engineers set out to design the ultimate downpipe option for the 8V RS3 and 8S TTRS chassis by employing leading-edge development technology along with highly specialized cast manufacturing. By using cast sections this allowed our engineers to design specialized shapes into the downpipe itself that lets it conform and fit into very tight spaces while retaining it's large size and maximized flow rates. The design is so specialized that 3D scanning was used to build a digital model of the chassis to design in allowing us to build shapes down to the millimeter. This design is just not possible using traditional stainless steel pipes and bends found in most exhaust manufacturing.
Bolting this downpipe onto your Audi along with other matching bolt-ons and an IE STage 2 Tune results in up to 577 horsepower! You can take your RS3 or TTRS from a sporty driver to a power monster in a single weekend. Downpipe requires Stage 2 Tune for a complete installation.
LET THAT 5 CYLINDER ROAR!
Your RS 2.5 TFSI engine has an amazing 5 cylinder sound that all enthusiasts love. Unfortunately, much of that sound is muffled by the factory downpipe system. The cast design of your IE downpipe creates an aggressive and deep tuned sound that showcases the unique rumble from the 5 cylinder turbo engine and transforms it into an all-out howling beast!
HIGH-FLOW CATALYTIC CONVERTER
By employing a high flow metal matrix catalytic converter, horsepower loss is almost non-existent for track days and drag events while keeping unpleasant smells and increased emissions to a minimum.
LONG-LIFE MANUFACTURING
IE Y-PIPE ADAPTER REQUIRED FOR STOCK CATBACK
This downpipe holds the seal of IE quality and has been manufactured to last as long as you own the vehicle and beyond. Constructed from 304 stainless steel and expertly tig welded for incredible reliability. The cast and CNC machined turbo flange is thick to prevent leaks or warping at the turbo while a quality flex section works to allow normal movement between the chassis and engine without adding strain to the downpipe.
IE's Y-Pipe Adapter Kit (sold separately) is used to adapt your IE Downpipe to a stock catback exhaust section. This high quality stainless steel cast adapter is a complete kit that will make installing our downpiep to your stock exhaust painless and easy! This part is not required if you are installing an IE Catback System.
BOLT-ON INSTALLATION
This downpipe kit bolts-on directly to either an IE Catback or stock catback (with adapter) with no permanent modifications or alterations to the vehicle. The removal of the factory downpipe is a very long process and is only recommended to be performed by a professional. DIY is not recommended for most on this product.
VEHICLE FITMENT GUIDE:
FITMENT GUIDE
MAKE MODEL YEAR ENGINE AUDI
RS3
2017+ 8V
2.5T FSI
AUDI
TTRS
2018+ (8S)
2.5T FSI
$2,749.00
IE POWERlink Flash Cable | Direct-Port ECU Tune Tool
Description
This listing is for the IE POWERlink Flash Tool only.
You may also purchase this cable with IE performance tunes for your vehicle (sold separately).POWER IN THE PALM OF YOUR HAND
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
LEADING FEATURES
- Uploads IE Performance Tunes (sold separately)
- Apple & Android mobile flashing app (supported platforms)
- Flashes engine & transmission tunes
- Direct OBD2 vehicle flashing in only minutes
- Customizable live gauge display (Mobile)
- Octane and feature switching (varies by platform)
- Upgrade tune stages for matching hardware
- Return to 100% stock programming at anytime
- Read and Clear diagnostic codes
- Check and clear emissions monitors
- Data-logging (Windows 10+ laptop)
FLASH WITH A LAPTOP
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE PORTS OS PROC. POWER RAM Laptop or Tablet
Wifi & USB
Windows 10 or newer
32 or 64 bit
1.0ghz or greater
4GB or greater
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.
$299.00
Copyright © 2021, VW Central, All Rights Reserved
SAFE & SECURE SHOPPING
