You have no items in your shopping cart.

Product was successfully added to your shopping cart.

B8/B8.5 (2012-2017)

Set Descending Direction

   

9 Item(s)

  1. CTS TURBO AUDI B8/B8.5 S4, S5, Q5, SQ5 V6T SUPERCHARGED AIR INTAKE SYSTEM (TRUE 3.5″ VELOCITY STACK)

    At CTS Turbo we are proud to announce our new air intake system for the Audi 3.0T and 3.2L FSI engines.  The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system.  Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing.  Our single piece CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air into the the engine providing peak power gains ranging from 5-8HP.  All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
     

    Only for B8 and B8.5 Audi S4/S5/Q5/SQ5 with 3.0T or 3.2L V6 engine!


    Product Details:
    - Mandrel bent aluminum piping with black powder coating
    - Reusable air filter with inverted cone design
    - 4 Ply silicon connector with stainless steel clamps
    - Sealed air box with rubberized trim
    - Bracketry to prevent rattling under engine torquing

    - Billet SAI breather adapter and Billet bracket with SAI breather filter
    - Gains ranging from 5-8HP


    Installation guide can be downloaded here

    $649.00
  2. CTS Turbo B8 3.0T Supercharger Pulley Upgrade Kit

    CTS Turbo is proud to release our B8 3.0T Supercharger Pulley Upgrade Kit.  

    CTS pulley is smaller diameter than stock. It will increase the speed at which the supercharger spins and will increase the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components. 

    NOTE: CTS B8 3.0T Supercharger Pulley Upgrade Kit must be used with appropriate "Stage 2" performance software.  
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air fuel ratios, timing, and boost pressure bleed off.  

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo, in Canada
    • Precision CNC machined from billet ASI303 stainless steel - best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Replacement supercharger drive belt
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    $249.00
  3. IE Audi 3.0T Cold Air Intake Carbon Fiber Lid Only | Fits B8/B8.5 S4 & B8.5 S5, Q5 & SQ5 8R

    UPGRADE YOUR IE INTAKE!

    Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.

    $459.00
  4. CTS TURBO B8.5 S4, S5, Q5, SQ5; C7.5 A6, A7, Q7 3.0T SUPERCHARGER PULLEY – BOLT ON STYLE

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $249.00
  5. P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release  – Audi MK1 Q5/SQ5 Gauge (2008 - 2017) P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release  – Audi MK1 Q5/SQ5 Gauge (2008 - 2017)
    Sale

    P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – Audi MK1 Q5/SQ5 Gauge (2008 - 2017)

    Compatible with all Mk1 Q5 Models (8R)

    P3 V3 Gauge Features

    • Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
    • OEM Integration - installs in your vent for a sleek install while retaining air flow
    • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
    • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

    P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

    • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
    • Coolant temperature
    • Air/Fuel ratio (can be read in AFR or Lambda)
    • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
    • Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
    • Throttle angle
    • Ignition timing
    • Engine RPM
    • Exhaust gas temperature
    • Battery voltage
    • Programmable shift light
    • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
    • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
    • Acceleration timers (0-60mph/0-100mph/60-130mph)
    • Braking timers (60-0mph/100-0mph)

    OEM Vent Option

    • We install the display in an OEM vent to make your install even easier

    Optional Add-Ons

    • P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
    • Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
    • P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
    • Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
    • OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

    You asked, we answered.

    The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

    There when you need it, hidden when you don't.

    No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

    Hot or Cold? No problem!

    Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

    Electronics in a harsh climate? We've got that covered too.

    We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

    Need more details? 

    Check out the V3 install page for configuration and installation info.

    Regular Price: $594.00

    Special Price $535.00

  6. IE Audi 3.0T Cold Air Intake | Fits 8R SQ5 & Q5

    UNIQUELY ENGINEERED

    This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.

    EASY POWER

    The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.

    DESIGN FEATURES

    INCREASED AIR FLOW

    Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!

    HIGH-FLOW VELOCITY STACK

    Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.

    PRECISION FIT

    This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.

    QUALITY COMPONENTS

    IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.

    VEHICLE FITMENT GUIDE:

    MAKE MODEL YEAR ENGINE

    AUDI

    SQ5

    2014-2017 8R

    3.0T Supercharged

    AUDI

    Q5

    2009-2017 8R

    3.0T Supercharged

  7. OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Scan Tool for Android and iOS (Beta) - VW, Audi & Skoda OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Scan Tool for Android and iOS (Beta) - VW, Audi & Skoda
    Sale

    OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Scan Tool for Android and iOS (Beta) - VW, Audi & Skoda


    Professional diagnostic tool in your pocket.

    OBDeleven with 12 month  PRO Plan OBDeleven becomes a professional diagnostic tool. Operating with easy to use application it allows to fully access all car systems, program, monitor and activate various functions via your iOS, Android, and Huawei devices.

    Official and licensed full-featured software is constantly updated with new features. The programming temporarily is not supported on models that are manufactured from 2020 and have SFD protection. The negotiation regarding the support of these models is in progress.

    Pack includes:

    • Next generation device
    • 12 month PRO Plan
    • 200 credits
    • Pro Plan and 200 credits will be sent to your email


    Frequently Asked Questions:

    Q. What vehicles are supported with One-Click-Apps by OBDeleven
    A. Please refer to OBDeleven Official Supported Vehicles Page

    Q. Are OBDeleven credits included?

    A. Yes, the Pro Pack includes 200 Credits with the kit, and provides you with 12 months access on their PRO Plan

    Q. What vehicles are supported with this device?
    A. Vehicles built after 1996 that are Audi, Volkswagen, Seat, Lamborghini, Bentley and Skoda models are supported.

    Q. How do I know what tweaks or modifications I can code for my vehicle. 
    A. We do not provide support with the coding and adaptation, there are many YouTube guides for VCDS & OBDeleven:
    Here is an example of some MK7 Coding and Adaptation available for your OBDeleven device
    Q. Does this product require an internet connection?
    A. Yes, an internet connection is required whilst using the OBDeleven device. We recommend having good reception and a strong signal to ensure a stable connection with their servers.

    Q. If I require assistance with this product who do I contact?
    A. OBDeleven have a dedicated support area

    Q. Will any changes I do to my vehicle with OBDeleven have any effect on my factory vehicle warranty?
    A. Any form of modification may impact your warranty. VW Central will not take any responsibility for damage caused by using the OBDeleven device. 

    Q. Where do I find the OBDeleven App?
    A. The OBDeleven App is available on both the Apple App Store or for Android Users on the Google Play Store.

    OBDeleven - Kit Contents

    Features for iOS Devices:
    OBDeleven - iOS Support

    Features for Android Devices:

    OBDeleven - Features for Android

    Regular Price: $249.00

    Special Price $209.00

  8. IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $359.00
  9. CTS TURBO 3.0T V6 DUAL PULLEY UPGRADE KIT (PRESS-ON, 187MM)

    CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).

    The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.

    This kit features press-on style supercharger pulley. Check on your vehicle before ordering!

    NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.

    Kit Includes:

    1 x CTS Turbo Supercharger Pulley, Press-on, 57.3mm
    1 x CTS Turbo Crank Pulley, 187mm
    8 x Grade 12.9 bolts
    1 x Bando Serpentine Belt (Made in the USA)

    Fitment (check on vehicle):

    • S4 B8/B8.5 (2010-2016)
    • S5 B8/B8.5 (2010-2016)
    • SQ5 B8 (2014+)
    • Q5 B8 (2009+)
    • A6 C6 (2005.5 – 2011)
    • A6 C7 (2012+)
    • A7 C7 (2012+)
Set Descending Direction

   

9 Item(s)