Search results for 'road'

VW MK5 Golf GTI Front Splitter + Aero Spacers Kit Includes Splitter(s) Pre-mounted Adjustable Aero Spacers 2 Flow Designs Stickers Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

VW MK4 Golf R32 Front Splitter + Aero Spacer Kit Includes Splitter(s) Pre-mounted Adjustable Aero Spacers 2 Flow Designs Stickers Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

VW MK4 Golf R32 Rear Valance Set (3 Piece) Kit Includes Spats (Pair) Centre Valance 2 Flow Designs Stickers Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

VW MK4 Golf R32 4 Piece Side Splitter Kit Includes Splitter (4 Pieces) 2 Flow Designs Stickers Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

VW Scirocco R (PFL) Front Splitter + Aero Spacers Kit Includes Splitter to suit Pre Face Lift Scirocco R Pre-mounted Adjustable Aero Spacers 2 Flow Designs Stickers OPTIONAL centre spoiler attachment Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

VW Scirocco R (PFL) Side Splitter Kit Includes Side Splitters (Pair) to suit Pre Face Lift Scirocco R 2 Flow Designs Stickers Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

VW Polo 6R Gti Front Splitter Kit Includes Splitter 2 Flow Designs Stickers Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable. Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

ADD POWER, TORQUE, AND SOUND

The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine. 

LEADING FEATURES

• INCREASED HORSEPOWER & TORQUE
• ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
• HIGH-FLOW BELLMOUTH
• MASSIVE OVER-SIZED AIR FILTER
• BLACK POWDER COAT FINISH
• EASY INSTALL WITH NO MODIFICATIONS
• USES FACTORY MOUNTING GROMMETS & HARDWARE
• HEAT SHIELDING & DIRECTED AIR FLOW
• REINFORCED SILICONE HOSES
• FITS DSG AND MANUAL TRANSMISSIONS

YOUR BUILD DESERVES THE BEST

Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.

STOCK-LIKE DIRECT FIT

This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.

HIGH-FLOW VELOCITY STACK

The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!

THERMAL BLOCKING HEAT SHIELD

The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.

DO YOU NEED AN SAI KIT?

The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.

EASY INSTALLATION

Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.

CLICK HERE to view and download the Cold Air Intake install guide

Volkswagen MK7 Golf GTI Front Splitter & Aerospacers

Details:

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept all our add-on accessories for the MK7 GTI such as winglets and splitter extensions.

---

Kit Includes:

• Front splitter with pre-pressed in threaded brass inserts (Front Extensions and Front Winglets sold separately)
• Bumper reinforcement bracket
• Pre-mounted adjustable Aerospacers
• 2 Flow Designs stickers
• Fitting kit

CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.

Material:

• Front Splitter: 10mm thick polyethylene composite

Finish:

• Hand polished satin black
• Bevelled edges

Why do we use Polyethylene Composite for Flow Designs Splitters?

Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)

Carbon Fibre is better isn’t it?

As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

 

Shipping Dimensions for the type of product:

Front
184x55x5 @5kg

Side
194x14x4 @5kg

Diffuser
92x25x7 @2kg

Spat
25x25x4 1kg

Winglets
25x13x11 @.5kg

VW MK7 Golf GTI Rear Valance & Fairing Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. Kit Includes: Centre valance & aerospacers Rear fairing 2 Flow Designs stickers Fitting kit Rear spats and adjustable rear winglets sold separately Material: Valance: 10mm thick polyethylene composite, bevelled edges Rear Fairing: 4.5mm thick ABS plastic Finish: Valance: Hand polished satin black Rear Fairing: Scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.