Search results for 'box'
P3 Cars Analog Gauge - VW Golf MK5 GTI (2005-2009)
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 SensorsThe P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Questions? Check out our P3 Analog Gauge install/config page for details.
$399.00
P3 Cars Analog Gauge - VW Golf MK5 R32 (2005-2009)
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 SensorsThe P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Questions? Check out our P3 Analog Gauge install/config page for details.
$399.00
XFORCE - BMW G80 M3 G82 M4 Black Tips
Description
Matt Black 4″ Tips
Features
This tip part number contain 4 tips in the box.
- Bolt on 4″ outlet tips
- Matte black coating
- Laser etched XFORCE logo
- 304 Stainless steel
- Bolt on 4″ outlet tips
- To suit XFORCE VAREX BMW M3/M4 G80 G82 Cat-Back System ESBMG80VKCS
$340.00
LEYO - (MQB) MK7/8 GTI TURBO CHARGE PIPE
Description:
For more efficient and cooler air flow, be sure to compliment your ride with Leyo Motorsport’s Turbo Charge Pipes.
Our in-house designed full aluminium tubing allows a less restricted path between your intercooler and turbocharger housing. When performing real time testing, our research and developers found the OEM unit was not efficient in keeping intake air traveling smoothly all the way to the Manifold. This is where Leyo Motorsport turbo charge pipes comes in. We use a heavy duty silicon hose and clamp to maintain optimal high boost flow for stage 1 to stage 3 setups in your performance vehicle with extra WMI Bung. The Leyo Motorsport turbo charge piping is larger than the OEM unit allowing for smoother performance when tuning on a dyno.
Don’t let airflow be restricted, order your unique Leyo Motorsport turbo charge pipe kit today.
Specifications:
-
Improved air flow from the turbo all the way through.
-
Removes OEM restrictions.
-
Pipes made from heavy duty aluminum.
-
Connectors made from heavy duty silicon.
-
Perfect for Stock & Stage 1 through to 3 performance.
-
2 WMI Bung.
-
10mm larger than OEM.
ONLY FIT
-
For MQB 7 speed DQ381 and 6 speed DQ250 DSG gear box.
-
Stock Intercooler 60mm I.D.
-
Aftermarket uprated intercooler core with stock diameter connector 60mm I.D.
$679.99-
IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
Your car deserves the performance, sound, and quality from an intake system that reflects the Audi S trim as a true performance machine. IE's engineers took a "no expense spared" approach to design the ultimate intake system solution that delivers on looks, fit, and most importantly -power!
PERFORMANCE TESTING
No part of this intake design is by accident, every inch is engineered and tested for performance first. Countless revisions undergo dyno testing, flow bench, and real-world use to maximize potential. As a result of this testing, the massive air filter, built-in velocity stack, large internal volume, ram air inlet, and bottom plate louvers ensure the intake supplies more than enough airflow across the entire powerband for any ECU tune or turbo setup.
CARBON FIBER - MORE THAN STYLE POINTS
In order to maximize airflow, a large internal volume is required to support the necessary amount of flow for the engine. Carbon fiber construction allows our engineers to create complex shapes and angles that just can not be achieved with sheet metal bends. This design style utilizes every millimeter available in oddly shaped modern engine bays for a very large air supply and smooth delivery. The finished product results in a performance design with a stylized high-end look for your engine bay.
UNIQUE SOUND
You drive a flagship S model Audi with a 6 cylinder turbocharged engine -make it sound like one!
The factory intake kills any and all engine sound to meet requirements for everything but fun. By upgrading to an IE intake system, you are taking full advantage of a performance design including the turbocharger spool, engine throttle, and diverter valve sounds that come along with it. The unique velocity stack and bottom louver design create a tuned engine note that sounds classy, yet powerful at the same time. This level of sound is not heard through other brand closed box intakes and is a much more refined sound than found with open element style intakes. Get ready to sing the song of power!
SEAMLESS DESIGN
The only fully carbon 1-piece intake design on the market offers more than a fantastic look alone. This reduces the chances of air leaks from an airbox/air duct joint, finicky installs, rubbing noises, or parts working loose over time while also providing an easier install. Furthermore, this is a complete all-inclusive intake system that does not require any additional parts sold separately to complete the intake.
EASY INSTALLATION
This Intake fits Audi B9 S4 & S5 3.0T V6 Turbocharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allow for natural engine movement which keeps intake components from getting damaged.
HIGH-FLOW VELOCITY STACK
By incorporating a professional motorsport style velocity stack into the airbox design, airflow is channeled from the large internal airbox volume into the turbocharger as quickly as possible. The bellmouth shape creates a very high inertia flow from the massive filter with very low drag or power-robbing turbulence.
MULTIPLE PRESSURE ZONES
Engineered to support any power level, the intake takes advantage of multiple air supply avenues. The front large air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for the majority of the air supply. Additionally, the bottom plate louvers pull extra required air as needed from the low-pressure zone under the intake. These dual zones provide an unrestricted supply of air across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.
PRECISION FIT
To ensure a perfect fit, 3D scanning tools are used to create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. This provides an incredibly high-resolution environment to reverse engineer and prototype the intake design. This not only allow engineers to take advantage of all available room but also results in a perfect and extremely high-end install.
QUALITY COMPONENTS
No flimsy parts or quality sacrifices found here! Only the best materials and design features were used for a top-tier look, fit, function, and long-life reliability.
SPECIFICATIONS
- High-gloss true carbon fiber construction
- Factory style mounts
- Stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum bottom plate
- Stainless laser-etched logo plate
- 5" pleated cotton filter
COMPATIBILITY
- 2017-On Audi S4 B9 3.0T Turbocharged
- 2017-On Audi S5 B9 3.0T Turbocharged
$1,664.00
LEYO AIR Cold Air Intake System V2 - Audi RS3 8V 17-18
Product Details:
Proudly presenting you Leyo Motorsport Cold Air Intake for the facelifted Audi RS3 with the all new 400HP aluminum block. This intake builds on the airbox design of our pre-facelift RS3 intake while integrating factory dampening design on the intake pipe. The intake pipe with the wide 100mm filter flange tapering to 76mm creating a velocity stack design efficiently feeds cold air into the turbo.
Specially designed air box prevents heat soak, effectively extracting colder induction air. For those that wants the open airbox design, Leyo RS3 intake airbox can be both enclosed or open. No fabrication required for installation, bolts straight onto factory mounting points.
*Fits up to 2019 model year.
*This product is only for use on the race track.COMPATIBLE VEHICLES
Brand Year Model Gen Engine Audi 2015-2017 RS3 8V.1 2.5TFSI $749.00
P3 Cars Analog Gauge - VW Mk7 / MK7.5 Golf GTI (2014-2019) - Right Hand Drive
P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors$399.00
P3 Cars Analog Gauge - VW Mk7 / MK7.5 Golf R (2014-2019)
P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors$399.00
CTS Turbo MK5 GTI / MK6 Golf R Air Intake System
At CTS Turbo we are proud to announce our new air intake system for the transverse 2.0T FSI EA113 VW/Audi range of vehicles.
The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 2.75″ air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF position, you can be sure that fuel trims will remain perfect.
All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.
This intake kit is designed to be compatible with our FSI EA113 BOSS kits; intake pipe features 2x 1/8″ bungs and 1x 1/2″ bung for easy installation of BOSS kits. Plugs are included.
Product Details:
- Full 2.75″ Mandrel-bent aluminum piping with black powder coating
- Compatible with CTS BOSS kits, with provisions for easy installation
- Reusable 3″ air filter with inverted cone design
- 4 Ply silicon connectors with stainless steel clamps
- Air box with rubberized trim
- Bracketry to prevent rattling under engine torquing
- Gains ranging from 9-15WHP on stock vehicle, even more if tuned!
- No CEL, no fuel trim issues
Fitment:
- MK5 VW GTI incl. Edition 35 (2006-2008)
- MK5 VW GLI (2006-2008)
- MK5 VW EOS (2006-2008)
- MK6 VW Golf R (2012-2013)
- MK2 SEAT Leon (2006-2009)
- MK2 SEAT Cupra R (2006-2012)
- B6 VW Passat (2006-2010)
- 8P Audi S3 (2006-2013)
$649.00
CTS Turbo MK7 & MK7.5 Intake 2014+ (GTI/Golf R/Golf/A3/S3)
At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow.
The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing. Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.
Product Details:
- Mandrel bent large bore 3.5" aluminum piping with black powder coating
- Coveted Laser etched //CTS Turbo logo
- 3.5" Reusable air filter with inverted cone design
- 4 Ply silicon connectors with stainless steel clamps
- Sealed air box
- Bracketry to prevent rattling under engine torquing
- Billet SAI breather adapter and filter (Optional in drop down menu)
Fitment:- 2014+ VW Golf (all models)
- 2014+ VW GTI
- 2014+ VW Golf R
- 2018+ Audi A3 (all models)
- 2018+ Audi S3
NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.
CONFIRM ON YOUR CAR BEFORE ORDERING!
$649.00
SAFE & SECURE SHOPPING
