COSMETIC

DETAILS:

Update the styling of the classic MK4 Golf R32 with Flow Designs splitter set including front & side splitters & a 3 piece rear valance. The splitters are made from quality 10mm thick polyethylene composite which will not crack under pressure, & install is easy with guaranteed fitment to the bumper.

---

KIT INCLUDES:

• Splitter(s)
• Pre-mounted Adjustable Aero Spacers 
• 2 Flow Designs Stickers
• Fitting kit

MATERIAL:

• 10mm thick polyethylene composite, bevelled edges

FINISH:

• Hand polished satin black

 

 

DETAILS:

The Flow Designs front splitter for Volkswagen Polo GTI (6R) fits perfectly to the standard bumper for a hassle-free, easy installation. Made from a 10mm thick polyethylene material, the front splitter is hand polished to satin black & will not crack as it is both impact & chip resistant.

---

KIT INCLUDES:

• Splitter
• 2 Flow Designs Stickers
• Fitting kit

MATERIAL:

• 10mm thick polyethylene composite, bevelled edges

FINISH:

• Hand polished satin black

Do it right the first time and only purchase a Genuine VW reverse camera. This boot handle reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B. Volkswagen Original Boot Lid Camera KIT Composite(AV) Output Compatible with: * VW Golf MK6 Wagon (2010-2013) * VW Tiguan 5N (2007 - 2014) * VW Passat B6 & B7 (Wagon) (2005-2014) * VW Jetta 1K & 5C (2005-2012) See behind your car with a camera in your boot lid. A camera at the back of your car shows you what's behind to make reversing safer and easier. Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot. The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking. Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer. Compatible with head unit : VW Genuine RCD330 / RCD340 - 6RD035187B VW Genuine Discover Media VW Genuine Discover Pro Radiosystem: Composition Media Not compatible with Composition Media radios with the following part numbers : 5G0035820 5G0035819 5G0035812 Please note: VAS / OBD11 / VCDS Coding is required after installation. Professional Installation is recommended, we do not provide installation assistance for this product.  FAQ's Does this camera work with the RCD330? Yes! It certainly does, no delay timer or AV converter box required.  What is included in this kit? The Genuine VW Handle Reverse Camera & Wiring Harness Will this camera work with an RCD510/RNS510 or RNS315 Radio? No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below) 

Do it right the first time and only purchase a Genuine VW reverse camera. 
This flip badge reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B.

Volkswagen Original Rear Emblem Camera KIT Composite(AV) Output Compatible with: 

• VW Golf MK5
• VW Golf MK6
• VW Polo 6R / 6C (Bracket Required)
• VW Passat B7/B8 (Sedan Only)
• VW T-Roc

See behind your car with a camera in your boot.

A camera at the back of your car shows you what's behind to make reversing safer and easier.

Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.

The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.

Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.

Compatible with head unit :
VW Genuine RCD330 / RCD340 - 6RD035187B
VW Genuine Discover Media
VW Genuine Discover Pro
Radiosystem: Composition Media
Not compatible with Composition Media radios with the following part numbers :
5G0035820
5G0035819
5G0035812

Please note: VAS / OBD11 / VCDS Coding is required after installation. 
Professional Installation is recommended, we do not provide installation assistance for this product. 

FAQ's
Does this flip badge camera work with the RCD330?
Yes! It certainly does, no delay timer or AV converter box required. 
What is included in this kit?
The Genuine VW Flip Badge Reverse Camera & Wiring Harness
Will this camera work with an RCD510/RNS510 or RNS315 Radio?
No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)

DETAILS:

Update the styling of the classic MK4 Golf R32 with Flow Designs splitter set including front & side splitters & a 3 piece rear valance. The splitters are made from quality 10mm thick polyethylene composite which will not crack under pressure, & install is easy with guaranteed fitment to the bumper.

---

KIT INCLUDES:

• Spats (Pair)
• Centre Valance
• 2 Flow Designs Stickers
• Fitting kit

MATERIAL:

• 10mm thick polyethylene composite, bevelled edges

FINISH:

• Hand polished satin black

DETAILS:

The Flow Designs splitter set for the VW MK5 Golf GTI consists of front & side splitters which fit perfectly to the bumper & car body. They will enhance the aero styling of your Volkswagen, with a simple install after the removal of your stock bumper. All Flow Designs splitters will not crack!

• Splitter(s)
• Pre-mounted Adjustable Aero Spacers
• 2 Flow Designs Stickers
• Fitting kit

MATERIAL:

• 10mm thick polyethylene composite, bevelled edges

FINISH:

• Hand polished satin black

DETAILS

Flow-Lock interlocking system allows for assembly of the diffuser fins without the need for tools or fasteners. With a simple push and click the kit is assembled and ready for installation - this allows for zero exposed hardware giving you the cleanest look for your MK6 Golf GTI rear. No more ugly L-brackets, no additional exposed hardware and no double-sided tape, experience the Flow-Lock difference today! 

Valance is installed to the car through bolts and nuts while the Flow-Lock diffuser fins simply click and lock into the valance. It is also possible to install when your car is on the ground.

---

MK6 GOLF GTI FLOW-LOCK REAR DIFFUSER KIT INCLUDES:

• Flow-Lock MK6 Golf GTI rear diffuser (rear valance and Flow-Lock diffuser fins)
• 2 Flow Designs stickers
• Fitting kit

MK6 GOLF GTI FLOW-LOCK REAR DIFFUSER MATERIAL & FINISH

• Valance: 10mm thick polyethylene composite, bevelled edges
• Flow-Lock diffuser fins: 4.5mm thick textured ABS 
• Valance: Hand polished satin black
• Flow-Lock diffuser fins: scratch resistant textured ABS plastic
• CNC engraved logo and features

DETAILS

Protect your body work from scrapes or kerbing with our MK6 Golf GTI rear bumper spats/pods! All products in our core range are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

The pre-installed brass thread allow for installation of our MK6 Golf GTI adjustable rear winglets which are sold separately as a bolt-on accessory to suit our rear spats/pods.

---

MK6 GOLF GTI REAR SPATS/PODS V3 KIT INCLUDES:

• Rear spats/pods (pair)
• 2 Flow Designs stickers
• Fitting kit

MK6 GOLF GTI REAR SPATS/PODS V3 MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black