PERFORMANCE - CTS Turbo - H&R Springs - XFORCE - SuperPro - Wortec - Genuine VW
CTS Turbo is proud to announce an official release of our new K04 Upgrade for 2.0T FSI/TSI Transverse Engines.
Our engineers designed the compressor cover and exhaust housing to work with the larger K04 CHRA, exactly how intended. While other manufacturers simply install a larger K04 CHRA into a small factory-spec housing.
Beware of these hybrid builds, they are not made to provide optimal flow for the larger turbine wheel and can lead to poor performance and premature failure.
High-quality castings are CNC machined to replace your factory turbocharger and do not require any additional parts to be installed. All you need to run this K04 2.0T FSI/TSI Transverse Turbocharger Upgrade is a tune for your ECU and a performance downpipe.
This kit is by far the best ‘bang for the buck’ modification available for VW and Audi enthusiasts with the 2.0T FSI and 2.0T TSI engine. With proper tuning and supporting mods, this turbo will support 350HP/360TQ!
Features:
CTS-spec K04 CHRA with heavy-duty thrust bearings
Billet compressor wheel (MFS – machined from solid)
K04-specific compressor and turbine housing. NOT A HYBRID!
OEM+ manufacturing tolerances
VSR high-speed balanced
Direct-fit factory replacement
OEM installation kit included
Compatible with any K04-specific tune
Compatible with factory turbo outlet pipe (both FSI and TSI). Not compatible with aftermarket stock turbo outlet pipes
ROW vehicles, please confirm fitment with your CTS Turbo dealer.
Additional parts required:
K04-specific software tuning
CTS Turbo or other performance downpipe
Additional parts recommended:
CTS Turbo Cold Air Intake
CTS Turbo Direct-Fit Intercooler Kit
CTS Turbo High Flow Turbo Outlet Pipe (EA888 only)
S3 Fuel Injectors and HPFP upgrade (EA113 engines only)
H&R Sport Springs - Volkswagen Golf R Wagon (MK7)
Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle’s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.
H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany.
Features:
Lowers the center of gravity
Reduces body roll
Reduces wheel gap
Lower wind resistance
Front Drop: 25mm
Rear Drop: 25mm
Sale
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015)
8V Audi A3/S3 (up to production date Sept 27, 2015)
MK3 Audi TT/TT-S (up to production date Sept 27, 2015)
Regular Price:
$79.95
Special Price
$65.00
Sale
XFORCE - MK6 GTI Dump Pipe & Cat Features:
-T304 Seamless Stainless Steel tubing
-T304 Stainless Steel flanges
-Fixed 200 cell cat
-100% TIG Welded
-T304 Stainless Steel 02 bungs
-Stainless Steel Clamps
-Great Sound
Proper software must be used to remove the CEL that will occur.
COMPATIBLE WITH FACTORY VW CATBACK SYSTEMS
Regular Price:
$950.00
Special Price
$835.00
Sale
This product will only bolt directly to an Xforce axle back system.
- 3" dump pipe from turbo
- 100 cell high flow cat
- "3 connector pipe with resonator
- Will only bolt directly to an Xforce axle back system
Regular Price:
$1,200.00
Special Price
$1,055.00
Sale
Description
Non-Polished Stainless Steel 4″ Dump & Cat Kit
Features
- 4″ dump pipe
- 4″ 100 cell high flow race cat
- Non polished stainless steel
- Reduces to 3″ outlet
- Will bolt to factory standard cat back system
- Tune is recommended after fitment
Regular Price:
$995.00
Special Price
$875.00
Sale
FEATURES;
Polished stainless steel
3″ pipe work
Straight through sports muffler
Varex Muffler with twin outlet
Twin 4″ tips
Regular Price:
$1,699.00
Special Price
$1,495.00
Sale
Description
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reduced to 3″
- Flex bellows before hanger
- 100 cell high flow performance catalytic converter
- Designed to fit to factory cat back systems
- Requires ECU tuning
Fits the following;
- Audi 8P S3
- Audi 8P A3 2.0T
- Golf MK6 R
Part No: |
ES-VW07-KITB |
Vehicle Model: |
A3, GOLF R, S3 |
Diameter [in]: |
3 |
Material: |
Stainless Steel |
Regular Price:
$1,000.00
Special Price
$880.00
Sale
FEATURES;
Polished stainless steel
3″ pipe work
Straight through sports muffler
Varex Muffler with twin outlet
Twin 4″ tips
DUMP-PIPE & CAT KIT
3" Stainless Steel Dump Pipe and 100-cel Cat
Regular Price:
$2,600.00
Special Price
$2,288.00
Sale
4.5" Burnt Blue Tips for use with Xforce Hyundai i30N.
Regular Price:
$175.00
Special Price
$155.00