PERFORMANCE - CTS Turbo - H&R Springs - VW Central - Whiteline

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

DESCRIPTION CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler. Product Details: 60mm aluminum piping with CTS logo 5-ply silicon coupler Factory mounting points are used for perfect fitment Durable black powdercoat finish For 7-speed DSG/S-tronic transmissions only Compatible with factory and upgraded turbos Compatible with factory and upgraded intakes Compatible with factory and upgraded intercoolers Parts Included: Upper turbo outlet silicon Lower turbo outlet pipe 2 clamps Installation hardware Fitment: 2018+ VW Golf R DSG 7-speed 2019+ VW GLI DSG 7-speed 2019+ VW GTI DSG 7-speed 2018+ Audi A3 S-Tronic 7-speed 2018+ Audi S3 S-Tronic 7-speed 2018+ Audi TT, TT-S S-Tronic 7-speed NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275

MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015) 8V Audi A3/S3 (up to production date Sept 27, 2015) MK3 Audi TT/TT-S (up to production date Sept 27, 2015)

H&R Sport Springs - Volkswagen Golf R Wagon (MK7) Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle’s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany. Features: Lowers the center of gravity Reduces body roll Reduces wheel gap Lower wind resistance Front Drop: 25mm Rear Drop: 25mm

H&R springs 28826-1 for Audi A3 incl. Lim./ Sedan + Sportback Quattro

H&R sport springs 28826-1 for Audi are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. H&R springs have superb ride comfort and increased driving convenience. 

All H&R springs are made from high-strength spring steel to ensure first-class quality and performance. The springs are designed in such a way that they can be easily combined with standard or retrofit dampers and offer a sporty look. A powder coating also improves corrosion resistance while giving the spring a high-quality appearance.

Product benefits:

• Sporty appearance
• Improved handling characteristics
• Lowered center of gravity
• Linear or progressive spring design
• Compatible with OE and aftermarket shock absorbers
• Powder coated for anhanced appearance and corrosion resistance
• Delivered with ABE or TUV approval
• Engineered, manufactured and tested in Germany

The secret to such success? To put it simply, the technology H&R employs to develop cutting-edge suspension systems for competition use is the very same used to develop innovative suspension components for street-driven cars. In addition, H&R maintains extensive involvement in several touring car, GT and Monoposto racing series. Not to mention the Formula 1- where each circuit may have its own demanding characteristics. 

In the harsh environs of competition, H&R is able to test new materials and innovate production technologies. All of which can help racing teams adapt to changing road conditions accurately and efficiently. 

Vehicle Compatibility:

• Manufacturer	Model	Type	Lowering in mm (FA/RA)	Axle load (FA/RA)
  Audi	A3 incl. Lim./ Sedan + Sportback Quattro	Type 8V 4WD without MRC and/or Audi Drive Select/ without MRC and/ or Audi Drive Select for multi-/four-link rear axle / for multi-link /four-link RA	40/40	/

H&R lowering springs 29061-2 for Audi A4 Avant/SW A4 Lim./Sedan Quattro A5 Cabrio/Convertible A5 Sportback RS4 Avant RS5 Coupé S4 Lim.+ Avant Quattro Sedan+SW S5 Cabrio/ Convertible S5 Sportback

Description

H&R sport springs 29061-2 for Audi are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. H&R springs have superb ride comfort and increased driving convenience.

All H&R springs are made from high-strength spring steel to ensure first-class quality and performance. The springs are designed in such a way that they can be easily combined with standard or retrofit dampers and offer a sporty look. A powder coating also improves corrosion resistance while giving the spring a high-quality appearance.

Product benefits:

• Sporty appearance
• Improved handling characteristics
• Lowered center of gravity
• Linear or progressive spring design
• Compatible with OE and aftermarket shock absorbers
• Powder coated for anhanced appearance and corrosion resistance
• Delivered with ABE or TUV approval
• Engineered, manufactured and tested in Germany

Fitment

Manufacturer	Model	Type	Lowering in mm (FA/RA)	Axle load (FA/RA)
Audi	A4 Avant/SW	Typ B8 (8K) 2WD+4WD ab/from 1.101kg VA-Last/FA-load Mit ABE* incl. DRC	30/30	1.101 ->/
Audi	A4 Lim./Sedan Quattro	Typ B8 (8K) 4WD ab/from 1.101kg VA-Last/FA-load Mit ABE* incl. DRC	30/30	1.101 ->/
Audi	A5 Cabrio/Convertible	Typ B8 (8F7) 2WD+4WD ab/from 1.101kg VA-Last/FA-load Mit ABE* incl. DRC	30/30	1.101 ->/
Audi	A5 Sportback	Typ B8(BFA) 2WD+4WD ab/from 1.101kg VA-Last/FA-load Mit ABE* incl. DRC	25/25	1.101 ->/
Audi	RS4 Avant	Typ B8	15-20/15-20	/
Audi	RS5 Coupé	Typ B8 Quattro inkl. DRC Mit ABE* Einbau nur in einer offiz. Audi-Fachwerkstatt! Installation only in a specialised offic. Audi Shop!	15-20/15-20	/
Audi	S4 Lim.+ Avant Quattro Sedan+SW	Typ B8 (8K) 4WD ab/from 1.101kg VA-Last/FA-load Mit ABE*	30/30	1.101 ->/
Audi	S5 Cabrio/ Convertible	Typ B8 (8T) 4WD ab/from 1.101kg VA-Last/FA-load Mit ABE*	30/30	1.101 ->/
Audi	S5 Sportback	Typ B8 (8T) 4WD ab/from 1.101kg VA-Last/FA-load Mit ABE*	25/25	1.101 ->/

Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 26mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Engineered to 'Activate More Grip', BFK009 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 26mm 3 point adjustable front sway bar and 22mm rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 2 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

The ultimate entry level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit featuring Whiteline signature front and rear adjustable (where applicable) swaybars, drop links and performance lowering springs. Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 3.6kg/mm (201lb/in) front rated springs that provide a 15mm drop while the 4.3kg/mm (241lb/in) rated rears deliver a desirable 30mm to the vehicle. Boasting a 26mm 3 point adjustable front sway bar and 22mm rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this GS1 Kit.