Does not fit S5 or A5 platforms.
Regular Price: $1,899.00
Special Price $1,769.00
Regular Price: $594.00
Special Price $534.60
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!
IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.
Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.
This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.
EVAP CROSSOVER TUBE RELOCATION KIT
The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11
CATCH CAN KIT FOR BILLET VALVE COVER
The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3
*This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.
Presenting the renowned Innotech Performance Exhaust for your M3!
Innotech's valvetronic technology offers a sophisticated perfomance exhaust system that delivers both power and dynamic valve control to the driver's seat. The full system includes the remote capability to command 3 different modes: open, closed, and auto. In open mode, the valves are fully open for maximum flow and power, creating an exotic tone. When the valves are closed, volume is reduced for a more low-profile, comfortable drive. The auto mode enables the system to detect the engine RPM and fuel pedal signal to automatically adjust the valve movements. Furthermore, the muffler internals were individually designed and produced for each different car models in order to perform Valvetronic technology. Each product has its own unique sound and performance to break out of the ordinary.
Options available for further sound and power increases include adding an X pipe, catless front pipe or high flow catted front pipe (COMING SOON)
If you are also interested in the 'F1' version of this exhaust (not recommended for street/daily use) please contact us.
Regular Price: $5,796.00
Special Price $4,926.60
Regular Price: $5,499.00
Special Price $4,674.15
DESCRIPTION
The Volkswagen Golf R (Mk7.5) and the other Golf series (GTis and Golf Rs) has been one of the most popular hatchbacks in the car community. The famous EA888 engine is now at its 3rd generation, with its 2.0L turbo-charged engine, it continues to be a car with great tuning potential. The iPE Exhaust system is designed and engineered to enhance gas flow and maximize performance gain by 23HP and 39.2 Nm of torque. Highlighting the angry sound from the EA888 Gen3. This iPE exhaust system is handcrafted with T304 Stainless Steel to reduce weight by 13%(-4.0kg).
iPE Valvetronic system for the Volkswagen Golf R (Mk7.5) allows users to adjust the exhaust note through OBD II Hand Gesture Control Sensor or Bluetooth Remote Control Module. Furthermore, we also offer various motorsport-inspired exhaust tip upgrade options.
Catback Exhaust System:
1. Mid pipe
2. Valvetronic Muffler
3. Chrome Silver tips
Valvetronic Control system:
- Remote Control system
- Hand Gesture Control sensor (Optional)
Exhaust Tip Upgrade Options:
- Chrome Black tips
- Titanium Blue tips
- Carbon Fiber tips
Regular Price: $5,499.00
Special Price $4,674.15
DESCRIPTION
1.Improper adjustments made during installation may result in short-term to permanent damages to the iPE exhaust system and/or your vehicle.
iPE will not be held responsible for any damages to the vehicle, and warranties on our products will be voided if the damages occurred due to improper installation.If you have any trouble installing the system please contact your authorized dealer!
2. The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the iPE exhaust system. When installing the iPE exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature.
3. iPE makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the iPE exhaust system. The warranty is limited to defects recognized by our technical department and of normal use only, and excludes items subject to normal wear and tear(gaskets and damping wool). The warranty is voided in case of accidents, modifications, improper or competition uses.
*Actual product may vary due to product enhancement. iPE reserves the right to revise, change, explain the product.
*Cat Pipe/Cat-bypass Pipe ONLY fit with iPE Catback System
Regular Price: $5,499.00
Special Price $4,674.15