PERFORMANCE - CTS Turbo - Integrated Engineering - P3 Cars - Eibach - VW Central
Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.
Product Details
The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation.
Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle!
You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device.
In house designed and built in the USA, our Boost Tap includes the following:
Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap
3 Vacuum Ports with 1/4" Hose Barb Fittings
3 Vacuum Set Screws
Medium Strength Thread Lock
OEM Securing Clip
Manifold Pierce Alignment Tools
In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!
Sale
IE ULTIMATE PERFORMANCE VALVE SPRING & RETAINER KIT FOR 2.0T TSI
This high-quality IE Valve Spring & Titanium Retainer kit features spring rates optimized to match your 2.0T FSI/TSI specifications and provide proper valve control preventing valve float in high-power and high-revving applications.
LEADING FEATURES
- Protects against engine failure from valve float
- Safely increase your rev limit and power band
- Nan-peened valve springs provide long life
- In-house CNC machined retainers from titanium
- Optimized design for all EA113/EA888 2.0T engines
- Highest quality spring material available in the world
- Torture tested in-house for high-power reliability
INCLUDED IN KIT
- 16 PRECISION WOUND INTAKE/EXHAUST VALVE SPRINGS
- 8 EXACT TOLERANCE TITANIUM INTAKE RETAINERS
- 8 EXACT TOLERANCE TITANIUM EXHAUST RETAINERS
WHY DO I NEED A SPRING & RETAINER KIT?
Increasing your engine's power output often comes with modifications that require more RPMs to get the most out of it, such as larger turbochargers, tuned intake manifolds, and high-output software tunes. Upgrading those components without changing out the valve springs can leave you with a short power band or cause valve float and other significant damage.
ONLY TRUST YOUR ENGINE TO THE BEST
Other cheap valve spring kits are often designed by simply finding a spring that is stiffer and will fit. Those are also not usually a good compromise because many times they are the wrong stiffness, and often poorly constructed. A broken valve spring can cause total engine failure and destroy everything that you have put hard work and money into. Our kits are the only spring and retainer kits on the market designed by someone with a working knowledge of the unique valvetrain in the VW & Audi EA113 FSI engines, and what the spring requirements actually are.
THE ULTIMATE SPRING & RETAINER KIT
Manufactured out of the best spring wire in the world IE valve springs use a patented multi-stage shot peening process that further reduces failure rates. Our titanium retainers are machined with an excellent surface finish and tight tolerance control for a long lifespan. Each application is thoroughly tested to perform on these engines right here in our test facility in Salt Lake City, Utah. Our spring and retainer kits are the best matched, most tested parts on the market. Purchasing a set will ensure that your engine runs at maximum performance and reliability.
Regular Price:
$1,015.00
Special Price
$985.00
Description
DESCRIPTION
CTS Turbo is proud to release our 1.8T and 2.0T Atmospheric BOV KIT for EA888.3 equipped vehicles. The CTS Turbo Atmospheric BOV KIT (EA888.3) is made of billet construction and completely serviceable. Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required. The CTS Turbo Atmospheric BOV KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions. Our piston design ensures long life, easy installation, complete serviceability, great sound and great value. This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.
Fitment:
MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI+ Jetta 1.8T and 2.0T (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)
Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Compact design fits into tight spots easily
Description
CTS Turbo is proud to release our 2.0T DV (DIVERTER VALVE) KIT for EA888.3 equipped vehicles. The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) is made of billet construction and completely serviceable. Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required. The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions. Our piston design ensures long life, easy installation, complete serviceability, great sound and great value. This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.
Fitment:
B9 Audi A4/A5/Allroad/Q5 (EA888 Gen 3)
MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI Jetta (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)
Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Additional red spring is for high boost applications 2bar+
Compact design fits into tight spots easily
Description
DESCRIPTION
At CTS Turbo we are proud to announce our new throttle pipe for the 8V.2 RS3/8S TTRS 2.5T EVO. The OEM charge piping leaves something to be desired with inefficient bends not optimized for performance. The CTS Turbo throttle pipe increases the entire inside diameter to 2.5″ allowing for increased flow and greater performance. The integrated water methanol bungs allow for simple and straightforward installation of kits from Snow Performance. All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, power and torque throughout the entire power band and an aggressive race inspired sound.
Product Details:
– For 8V.2 RS3/ 8S TTRS 2.5T EVO
– CNC bent aluminum piping
– CNC machined MAP flange
– Integrated water methanol bungs with plugs
– Robust black powder coating
– CNC machined mounting flange
– Coveted CTS Turbo logo
Sale
CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE
Regular Price:
$329.00
Special Price
$299.00
Product Desciption:
We now offer a MK3 Audi TTRS and 8V Facelift Audi RS3 Catalytic Converter Midpipe kit.
Product Details:
– Hand Crafted from 3″ T304 Stainless Steel
– Necessary installation hardware included (gasket set included)
– CNC water jet cut flanges
– CNC mandrel bent stainless steel piping
– Polished stainless steel exhaust tubing
– Power gains from 7+ whp 10+ ftlbs torque
– Will not cause CEL (check engine light)
DESCRIPTION
We are proud to release the new our CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 450LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 500HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 450LPH E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
- 2015 – current VW Golf (incl Sportwagen and AllTrack)
- 2015 – current VW GTI (incl Rabbit)
- 2015 – current VW Golf R
- 2015 – current Audi A3
- 2015 – current Audi S3
- 2017 – current Audi A4/A5/AllRoad
Sale
Description
We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
- 2015 – current VW Golf (incl Sportwagen and AllTrack)
- 2015 – current VW GTI (incl Rabbit)
- 2015 – current VW Golf R
- 2015 – current Audi A3
- 2015 – current Audi S3
- 2017 – current Audi A4/A5/AllRoad
The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM
Regular Price:
$699.00
Special Price
$679.00