PERFORMANCE - IPE - H&R Springs - SuperPro - VW Central

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

Description If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar. Axle alignment required after fitting Compatibility 2018+ Hyundai i30N - PD N-Performance

Description Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: Axle alignment required after fitting. Compatibility 2018+ Hyundai i30N - PD N-Performance 2008+ Hyundai iLoad - TQ 02/2008+ Hyundai iMAX - TQ 2006-2012 Hyundai SANTA FE - CM

Compatibility 2018+ Hyundai i30N - PD N-Performance 2008+ Hyundai iLoad - TQ 02/2008+ Hyundai iMAX - TQ 2010-2015 Hyundai ix35 - LM 2015+ Hyundai TUCSON - TL

Compatibility 2018+ Hyundai i30N - PD N-Performance 2008+ Hyundai iLoad - TQ 02/2008+ Hyundai iMAX - TQ 2010-2015 Hyundai ix35 - LM 2015+ Hyundai TUCSON - TL

Compatibility 2018+ Hyundai i30N - PD N-Performance 2008+ Hyundai iLoad - TQ 02/2008+ Hyundai iMAX - TQ 2010-2015 Hyundai ix35 - LM 2015+ Hyundai TUCSON - TL

Description SuperPro Engine Steady Mount Bush Kit Compatibility 2018+ Hyundai i30N - PD N-Performan

Presenting the renowned Innotech Performance Exhaust for your M3!

​Innotech's valvetronic technology offers a sophisticated perfomance exhaust system that delivers both power and dynamic valve control to the driver's seat. The full system includes the remote capability to command 3 different modes: open, closed, and auto. In open mode, the valves are fully open for maximum flow and power, creating an exotic tone. When the valves are closed, volume is reduced for a more low-profile, comfortable drive. The auto mode enables the system to detect the engine RPM and fuel pedal signal to automatically adjust the valve movements. Furthermore, the muffler internals were individually designed and produced for each different car models in order to perform Valvetronic technology. Each product has its own unique sound and performance to break out of the ordinary.

Options available for further sound and power increases include adding an X pipe, catless front pipe or high flow catted front pipe (COMING SOON)

If you are also interested in the 'F1' version of this exhaust (not recommended for street/daily use) please contact us.