IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5

1Review(s)

LEADING INTAKE FEATURES

Increased airflow - Get the most out of your upgrades
High-flow velocity stack - True performance design
Sealed heatshield - Separates cold air from engine bay heat
Perfect fitment - No modifications required to bolt-on
Amazing sound - Releases awesome turbo and engine noise
Looks great - Black powder coat, tight clearances, clean angles

AUDI B8 A4 & A5 COLD AIR INTAKE

You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.

EASY INSTALLATION

Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.

VEHICLE FITMENT

Audi - A4 2009-2015 (B8-B8.5) 2.0T
Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
Audi - A5 2009-2015 (B8-B8.5) 2.0T

$719.00

Out of stock

IE Replacement 5″ Air Filter For IE Intake Kits

IE cone filters are specifically designed for high-flow and perfect fitment to the integrated velocity stack found on most IE cold air intake kits. This is a dry filter that can be oiled, however, we do not recommend air filter oiling on turbocharged or forced induction vehicles. The filter can be cleaned and re-used many times. If you find it difficult to clean your filter or find it severy stained, it may be time to replace the filter element. This is a direct replacement filter ready to keep your car on the road and performing at its best. Includes new filter clamp.

$99.95

Out of stock

IE Audi B9 A4 & A5 Cold Air Intake - Fits Cars With NO MAF ONLY

INCREASE POWER AND SOUND WITH A COLD AIR INTAKE

The IE Audi B9 A4 & A5 2.0T Cold Air Intake is the perfect addition to any engine bay. Give your Audi added horsepower, torque, snappier throttle response, and an aggressive sound. Typical peak gains from our CAI are roughly 10-20 Horsepower and Torque.

POWER GAINS

The ram air design, velocity stack, and massive 55-inchfilter inlet help deliver the most HP possible from a cold intake system.

Expect peak gains of 10-20+HP/TQ on tuned engines.

INCLUDED IN THE B9 IE CAI KIT

IE Intake velocity stack & heatshield assembly
IE Silicone turbo inlet pipe assembly
IE 5” inlet performance air filter
IE Turbo heat shield
All necessary hardware (clamps, nuts, bolts, etc)

INCREASED AIR FLOW

This Intake delivers an impressive flow increase to feed your turbo. More cold air flow means more power; especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.

DESIGN DETAILS

IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your A4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.

HIGH-FLOW VELOCITY STACK

Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.

CUSTOM HEAT SHIELD

IE uses a three piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay. A second heat shield is mounted above the turbocharger to further protect against power robbing heat off the exhaust and turbo.

PERFECT FITMENT

This Intake fits B9 Audi A4 and A5 without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle free fit. Additionally, the stock rubber mounts allow for engine movement which keeps intake components from getting damaged.

CLASSY AND CLEAN APPEARANCE

Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.

EASY INSTALLATION

Installation is a quick and easy install with basic tools. The process should take around an hour for most enthusiasts. CLICK HERE to view and download the IE B9 Cold Air Intake Install Guide.

INSTALL OVERVIEW VIDEO

DYNO POWER RESULTS

The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B9 A4 2.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car.

HORSEPOWER & TORQUE DYNO CHART

HORSEPOWER & TORQUE POWER GAINS OVER STOCK

VEHICLE FITMENT

Audi - A4 2015+ (B9) 2.0T
Audi - A5 2015+ (B9) 2.0T
Audi - A4 Allroad 2015+ (B9) 2.0T

This intake does not fit cars that have a MAF housing/sensor.

$789.00

Add to Cart

IE Audi 3.0T Cold Air Intake | Fits 8R SQ5 & Q5

UNIQUELY ENGINEERED

This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.

EASY POWER

The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.

DESIGN FEATURES

INCREASED AIR FLOW

Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!

HIGH-FLOW VELOCITY STACK

Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.

PRECISION FIT

This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.

QUALITY COMPONENTS

IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.

VEHICLE FITMENT GUIDE:

MAKE	MODEL	YEAR	ENGINE
AUDI	SQ5	2014-2017 8R	3.0T Supercharged
AUDI	Q5	2009-2017 8R	3.0T Supercharged

$702.00

Add to Cart

IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T

Your car deserves the performance, sound, and quality from an intake system that reflects the Audi S trim as a true performance machine. IE's engineers took a "no expense spared" approach to design the ultimate intake system solution that delivers on looks, fit, and most importantly -power!

PERFORMANCE TESTING

No part of this intake design is by accident, every inch is engineered and tested for performance first. Countless revisions undergo dyno testing, flow bench, and real-world use to maximize potential. As a result of this testing, the massive air filter, built-in velocity stack, large internal volume, ram air inlet, and bottom plate louvers ensure the intake supplies more than enough airflow across the entire powerband for any ECU tune or turbo setup.

CARBON FIBER - MORE THAN STYLE POINTS

In order to maximize airflow, a large internal volume is required to support the necessary amount of flow for the engine. Carbon fiber construction allows our engineers to create complex shapes and angles that just can not be achieved with sheet metal bends. This design style utilizes every millimeter available in oddly shaped modern engine bays for a very large air supply and smooth delivery. The finished product results in a performance design with a stylized high-end look for your engine bay.

UNIQUE SOUND

You drive a flagship S model Audi with a 6 cylinder turbocharged engine -make it sound like one!

The factory intake kills any and all engine sound to meet requirements for everything but fun. By upgrading to an IE intake system, you are taking full advantage of a performance design including the turbocharger spool, engine throttle, and diverter valve sounds that come along with it. The unique velocity stack and bottom louver design create a tuned engine note that sounds classy, yet powerful at the same time. This level of sound is not heard through other brand closed box intakes and is a much more refined sound than found with open element style intakes. Get ready to sing the song of power!

SEAMLESS DESIGN

The only fully carbon 1-piece intake design on the market offers more than a fantastic look alone. This reduces the chances of air leaks from an airbox/air duct joint, finicky installs, rubbing noises, or parts working loose over time while also providing an easier install. Furthermore, this is a complete all-inclusive intake system that does not require any additional parts sold separately to complete the intake.

EASY INSTALLATION

This Intake fits Audi B9 S4 & S5 3.0T V6 Turbocharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allow for natural engine movement which keeps intake components from getting damaged.

HIGH-FLOW VELOCITY STACK

By incorporating a professional motorsport style velocity stack into the airbox design, airflow is channeled from the large internal airbox volume into the turbocharger as quickly as possible. The bellmouth shape creates a very high inertia flow from the massive filter with very low drag or power-robbing turbulence.

MULTIPLE PRESSURE ZONES

Engineered to support any power level, the intake takes advantage of multiple air supply avenues. The front large air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for the majority of the air supply. Additionally, the bottom plate louvers pull extra required air as needed from the low-pressure zone under the intake. These dual zones provide an unrestricted supply of air across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.

PRECISION FIT

To ensure a perfect fit, 3D scanning tools are used to create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. This provides an incredibly high-resolution environment to reverse engineer and prototype the intake design. This not only allow engineers to take advantage of all available room but also results in a perfect and extremely high-end install.

QUALITY COMPONENTS

No flimsy parts or quality sacrifices found here! Only the best materials and design features were used for a top-tier look, fit, function, and long-life reliability.

SPECIFICATIONS

High-gloss true carbon fiber construction
Factory style mounts
Stainless hardware
Multi-ply silicone with stop-flat edges
High-quality clamps
Powder-coated aluminum bottom plate
Stainless laser-etched logo plate
5" pleated cotton filter

COMPATIBILITY

2017-On Audi S4 B9 3.0T Turbocharged
2017-On Audi S5 B9 3.0T Turbocharged

$1,664.00

Out of stock

IE Audi 3.0T Cold Air Intake | Fits C7 A6 & A7 (2010 - 2018)

Sale

IE Audi 3.0T Cold Air Intake | Fits C7 A6 & A7 (2010 - 2018)

IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.

EASY INSTALL
BOLT-ON DESIGN
NO MODIFICATIONS

ADDS HORSEPOWER
UP TO +21HP
ON TUNED ENGINES

FLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGN

POWER UP

Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.

HIGH-FLOW VELOCITY STACK

Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.

DESIGN FEATURES

ULTIMATE AIR FLOW

Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!

QUALITY COMPONENTS

The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.

EXACT FIT

This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.

VEHICLE FITMENT GUIDE:

MAKE	MODEL	YEAR	ENGINE
AUDI	A6	2010-2018 (C7/C7.5)	3.0T Supercharged
AUDI	A7	2010-2018 (C7/C7.5)	3.0T Supercharged

Regular Price: $702.00

Special Price $689.00

Out of stock

IE Audi 3.0T Cold Air Intake Carbon Fiber Lid Only | Fits B8/B8.5 S4 & B8.5 S5, Q5 & SQ5 8R

UPGRADE YOUR IE INTAKE!

Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.

$459.00

Out of stock

IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake Lid Only (No Intake) | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

Sale

IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake Lid Only (No Intake) | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

1Review(s)

PRODUCT DETAILS

IE Performance Cold Air Intake V2 Carbon Fiber Lid (No Intake)

The all-new Integrated Engineering 2.0T Gen 3 Cold Air Intake System for the VW/Audi MQB platform has been completely reimagined and redesigned from the ground up. Featuring a new 3.5" turbo inlet pipe and heat shield that spans the entire length of the radiator inlet to support massive power gains from even large turbo and hybrid setups. New modular design allows the intake to be ran as a cost-friendly open filter intake, or upgraded with a high-gloss carbon fiber assembly further reducing hot engine bay air and adding a high-quality style to your engine bay.

Included:

High-Gloss Carbon Fiber Intake Lid

PACKAGE CONTENTS:

High-gloss Carbon Fiber Lid ONLY (THIS LISTING DOES NOT INCLUDE THE INTAKE)

Get The Complete Carbon Fiber Intake Kit (See below):

This product page is only for the carbon fiber lid. This does not include an intake. We've bundled the intake and cover for your convinience. Combine Performance and style.

IE Carbon Fiber Performance Cold Air Intake V2 For Audi/VW MQB MK7/8V - IEINCI11-KT

DISCONTINUED PART NUMBERS & V1 INTAKE:

With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.

IEINCI2 -MQB TSI Cold Air Intake (Open FIlter)
IEINCI1 -MQB TSI Carbon Fiber Cold Air Intake
IEINCI3 -Carbon Fiber Inlet Pipe

VEHICLE FITMENT GUIDE

MAKE	MODEL	YEAR	ENGINE(S)
VW	GTI	MK7-MK7.5 2015-2019	2.0T
VW	Golf R	MK7-MK7.5 2015-2019	2.0T
VW	Golf	MK7-MK7.5 2015-2019	2.0T & 1.8T
VW	GLI	MK7 2019	2.0T
VW	Golf Alltrak	MK7-MK7.5 2015-2019	2.0T & 1.8T
Audi	A3	8V 2015-2019	2.0T & 1.8T
Audi	S3	8V 2015-2019	2.0T

Regular Price: $699.00

Special Price $659.95

Add to Cart

IE MK6 GOLF R / MK5 GTI COLD AIR INTAKE KIT - V2 2020 Release

Sale

IE MK6 GOLF R / MK5 GTI COLD AIR INTAKE KIT - V2 2020 Release

The IE MK6 Golf R Cold Air Intake Kit is the perfect intake upgrade for your engine bay. Benefits include added horsepower and torque, perfect MAF scaling, improved throttle response, and increased turbo noise. Peak gains are generally 10 Horsepower and Torque.

Regular Price: $799.00

Special Price $719.96

Add to Cart

IE MK6 GTI (2.0TSI) HIGH-FLOW COLD AIR INTAKE KIT

4Review(s)

ADD POWER, TORQUE, AND SOUND

The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine.

LEADING FEATURES

INCREASED HORSEPOWER & TORQUE
ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
HIGH-FLOW BELLMOUTH
MASSIVE OVER-SIZED AIR FILTER
BLACK POWDER COAT FINISH
EASY INSTALL WITH NO MODIFICATIONS
USES FACTORY MOUNTING GROMMETS & HARDWARE
HEAT SHIELDING & DIRECTED AIR FLOW
REINFORCED SILICONE HOSES
FITS DSG AND MANUAL TRANSMISSIONS

YOUR BUILD DESERVES THE BEST

Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.

STOCK-LIKE DIRECT FIT

This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.

HIGH-FLOW VELOCITY STACK

The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!

THERMAL BLOCKING HEAT SHIELD

The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.

DO YOU NEED AN SAI KIT?

The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.

EASY INSTALLATION

Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.

CLICK HERE to view and download the Cold Air Intake install guide

$769.00

Add to Cart

Air Intake - Integrated Engineering

LEADING INTAKE FEATURES

AUDI B8 A4 & A5 COLD AIR INTAKE

EASY INSTALLATION

VEHICLE FITMENT

INCREASE POWER AND SOUND WITH A COLD AIR INTAKE

POWER GAINS

INCLUDED IN THE B9 IE CAI KIT

INCREASED AIR FLOW

DESIGN DETAILS

HIGH-FLOW VELOCITY STACK

CUSTOM HEAT SHIELD

PERFECT FITMENT

CLASSY AND CLEAN APPEARANCE

EASY INSTALLATION

INSTALL OVERVIEW VIDEO

DYNO POWER RESULTS

HORSEPOWER & TORQUE DYNO CHART

HORSEPOWER & TORQUE POWER GAINS OVER STOCK

VEHICLE FITMENT

EASY POWER

DESIGN FEATURES

INCREASED AIR FLOW

HIGH-FLOW VELOCITY STACK

PRECISION FIT

QUALITY COMPONENTS

VEHICLE FITMENT GUIDE:

SPECIFICATIONS

COMPATIBILITY

POWER UP

HIGH-FLOW VELOCITY STACK

DESIGN FEATURES

ULTIMATE AIR FLOW

QUALITY COMPONENTS

EXACT FIT

VEHICLE FITMENT GUIDE:

UPGRADE YOUR IE INTAKE!

PRODUCT DETAILS

PACKAGE CONTENTS:

DISCONTINUED PART NUMBERS & V1 INTAKE:

VEHICLE FITMENT GUIDE

ADD POWER, TORQUE, AND SOUND

LEADING FEATURES

YOUR BUILD DESERVES THE BEST

STOCK-LIKE DIRECT FIT

HIGH-FLOW VELOCITY STACK

THERMAL BLOCKING HEAT SHIELD

DO YOU NEED AN SAI KIT?

EASY INSTALLATION