Vehicles

Description

CTS Turbo is proud to release our 2.0T DV (DIVERTER VALVE) KIT for EA888.3 equipped vehicles.  The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) is made of billet construction and completely serviceable.  Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required.  The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions.  Our piston design ensures long life, easy installation, complete serviceability, great sound and great value.  This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.

Fitment:

B9 Audi A4/A5/Allroad/Q5 (EA888 Gen 3)
MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI Jetta (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)

Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Additional red spring is for high boost applications 2bar+
Compact design fits into tight spots easily

CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles.  The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow.  Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.

The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!

The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!

Features:

• Designed to fit factory airbox and any turbo inlet pipe
• 5-ply silicone construction
• Smooth interior
• High strength hose clamps

Components:
1 x CTS Turbo MQB Turbo Inlet Hose
2 x Hose clamps

Fits the following vehicles:

• MK7 VW GTI
• MK7 VW Golf R
• MK7 Audi A3
• MK7 Audi S3

Volkswagen Scirocco PFL/FL Side Splitters (Pair) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Side splitters (pair) to suit pre-facelift and facelift Scirocco R 2 Flow Designs stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Volkswagen Scirocco PFL/FL Rear Valance (3 Piece) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Spats (pair) Centre Valance 2 Flow Designs Stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

DESCRIPTION
Suits Scirocco R FL models

DETAILS:
Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!

KIT INCLUDES:

• Scirocco R Rear Spats (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

Details: Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation. Kit Includes: Front splitter Side splitters (pair) Rear diffuser set WITH adjustable fins Adjustable front extensions (pair) Adjustable front winglets (pair) Adjustable side winglets (pair) Adjustable rear winglets (pair) 2 Flow Designs Stickers Fitting kit Material: Front splitter, side splitters, rear diffuser valance: 10mm thick polyethylene composite, bevelled edges Extensions & winglets: 4.5mm thick textured ABS Finish: Hand polished satin black Rear diffuser fins and accessories: scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Details: Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear spats valance & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation. Kit Includes: Front splitter Side splitters (pair) Rear spats valance set (no adjustable fins) Adjustable front extensions (pair) Adjustable front winglets (pair) Adjustable side winglets (pair) Adjustable rear winglets (pair) 2 Flow Designs Stickers Fitting kit Material: Front splitter, side splitters, rear spats valance: 10mm thick polyethylene composite, bevelled edges Extensions & winglets: 4.5mm thick textured ABS Finish: Hand polished satin black Rear diffuser fins and accessories: scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation.

Details:

Why is our splitter so strong? Our front splitter for the MK3.5 ST features 2^nd piece which forms a bridge that is bolt together at specific points to create a brace that spans along the centre of the splitter.

When installed onto your bumper using specially designed steel brackets and mounting hardware (supplied), your bumper is reinforced and our splitter can take on all the scrapes protecting your bumper.

The pre-installed brass thread will accept our adjustable front winglets and extensions, create your own style with our bolt-on accessories which are sold separately.  

Front extensions and winglets are sold separately.

Kit Includes:

• Splitter (2 piece)
• Threaded brass fittings (Pre-Installed)
• 2 Flow Designs Stickers
• Fitting kit

Material:

• 10mm thick polyethylene composite, bevelled edges

Finish:

• Hand polished satin black

 

Why do we use Polyethylene Composite for Flow Designs Splitters?

Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)

Carbon Fibre is better, isn’t it?

As strong and light as Carbon fiber is, it CRACKS on impact or when under load and/or stress. Clearcoat will eventually fade & cracks and become undesirable.

Install Instruction ( PDF )

Details: Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation. Front splitter sold separately. Kit Includes: •Front winglets (pair) •2 Flow Designs Stickers •Fitting kit

Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation. Details Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you. We also have designed in visual prompts so you know exactly where the splitter is meant to sit in relevance to the OEM side skirt. The pre-installed brass thread will accept our adjustable side winglets which are sold separately as a bolt-on accessory to suit our side splitter. These can be viewed HERE. Side winglets are sold separately. Kit Includes: Side splitters (pair) Threaded brass fittings (pre-installed) 2 Flow Designs Stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better, isn’t it? As strong and light as Carbon fiber is, it CRACKS on impact or when under load and/or stress. Clearcoat will eventually fade & crack and become undesirable.