Currently Shopping by
- Custom Stock Status: Remove This Item In stock
-
performance:
Cooling
Engine
Steering & Suspension
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Vehicles
H&R Lowering Springs - VW Scirocco III incl. R - Lowers F/R 30-35mm
H&R Lowering Springs - VW Scirocco III incl. R$520.00
Eibach Pro-Kit Performance Springs – VW Tiguan 5N MK1
Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring SystemRegular Price: $548.00
Special Price $493.00
Eibach Sportline Performance Springs – Octavia Combi RS
Eibach Sportline
Sport Performance Springs
- Pure Sport Suspension Springs and Appearance
- Lower ride height - up to 50mm
- Optimal attraction through lowering
- Motorsport-like handling
- Progressive suspension characteristics
- Engineered and tested to work perfectly with stock dampers
- Anti-Roll-Kit to control body roll
- Bilstein sport dampers to upgrade to our B12 Pro-Kit
Technical Data:
Manufacturer:: Eibach Drop front: 45mm Drop rear: 35-40mm Front axle load: Kg Rear axle load: 1150Kg Regular Price: $581.00
Special Price $523.00
Eibach Sportline Performance Springs - Jetta MK6 2.0 TSI 2.0 TDI
Eibach Sportline Sport Performance Springs Pure Sport Suspension Springs and AppearanceRegular Price: $493.00
Special Price $444.00
Eibach Sportline Performance Springs – Jetta MK6 1.4TSI
Eibach Sportline Sport Performance Springs Pure Sport Suspension Springs and AppearanceRegular Price: $581.00
Special Price $519.00
Eibach Sportline Performance Springs - Skoda Octavia IV RS Wagon
Eibach Sportline
Sport Performance Springs
- Pure Sport Suspension Springs and Appearance
- Lower ride height - up to 50mm
- Optimal attraction through lowering
- Motorsport-like handling
- Progressive suspension characteristics
- Engineered and tested to work perfectly with stock dampers
- Anti-Roll-Kit to control body roll
- Bilstein sport dampers to upgrade to our B12 Pro-Kit
Technical Data:
Manufacturer:: Eibach Drop front: 45mm Drop rear: 35-40mm Front axle load: Kg Rear axle load: 1150Kg Regular Price: $644.00
Special Price $580.00
Eibach Pro-Kit Performance Springs – Audi A5 Sportback 1.8T / 2.0T (2009-2017)
Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring SystemRegular Price: $633.00
Special Price $570.00
CTS TURBO B8.5 S4, S5, Q5, SQ5; C7.5 A6, A7, Q7 3.0T SUPERCHARGER PULLEY – BOLT ON STYLE
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
$249.00
IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
$359.00
IE Shifter Cable End Bushing Set for VW MK5 & MK6
PRODUCT FEATURES
- Eliminates excessive play from OE rubber bushings
- Greatly Reduces chances of missed shifts
- CNC machined in-house for precise fitment
- Bronze inner bushing to provide smooth pivoting without wear
PRODUCT DETAILSSay goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
- VW - Golf R 2012-2012 (MK6) 6 speed transmisison
- VW - GTI 2009 (MK5) 6 speed transmisison
- VW - GTI 2010-2014 (MK6) 6 speed transmisison
- VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
- VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
- VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison
$79.95
SAFE & SECURE SHOPPING
