CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE

Suits Pre-facelift Sportback only Details: Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market. Kit Includes: Adjustable front extensions (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

DESCRIPTION
Suits VA WRX & STI (2014-2020) models
Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!

PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.

TWO rubber trims are included:

• x1 pair Performance Rubber Trim for track use and regular driving which are secure.
• x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications.

Details
Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.

Included are rubber seals to prevent any vibrations and grips tight to your VA WRX/STI window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.

Whether you want to keep your cabin cool during track days, or improve the aesthetic of your VA WRX/STI, the Flow Designs window vents are the best option currently on the market!

Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:

Less vibrations at speed and idle
Eliminate baffling noises
To protect your windows and tint from scratching

KIT INCLUDES:

• VA WRX/STI Window Vents (pair)
• x1 pair Performance Rubber Trim for track use and regular driving and is secure. 2m in length and will need to be cut during install for perfect fitment.
• x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications. 2m in length and will need to be cut during install for perfect fitment.
• x2 Flow Designs stickers
• x1 Flow Designs air freshener
• Instructions

MATERIAL & FINISH:

• 4.5mm scratch resistant textured ABS plastic
• CNC engraved logo and features

Dual port boost tap allows for multiple boost references CNC machined from 6061 Aluminium Brass plug included

Description

CTS Turbo is proud to release our 2.0T DV (DIVERTER VALVE) KIT for EA888.3 equipped vehicles.  The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) is made of billet construction and completely serviceable.  Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required.  The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions.  Our piston design ensures long life, easy installation, complete serviceability, great sound and great value.  This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.

Fitment:

B9 Audi A4/A5/Allroad/Q5 (EA888 Gen 3)
MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI Jetta (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)

Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Additional red spring is for high boost applications 2bar+
Compact design fits into tight spots easily

CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles.  The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow.  Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.

The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!

The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!

Features:

• Designed to fit factory airbox and any turbo inlet pipe
• 5-ply silicone construction
• Smooth interior
• High strength hose clamps

Components:
1 x CTS Turbo MQB Turbo Inlet Hose
2 x Hose clamps

Fits the following vehicles:

• MK7 VW GTI
• MK7 VW Golf R
• MK7 Audi A3
• MK7 Audi S3

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

Volkswagen Scirocco PFL/FL Side Splitters (Pair) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Side splitters (pair) to suit pre-facelift and facelift Scirocco R 2 Flow Designs stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Volkswagen Scirocco PFL/FL Rear Valance (3 Piece) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Spats (pair) Centre Valance 2 Flow Designs Stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

DESCRIPTION
Suits Scirocco R FL models

DETAILS:
Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!

KIT INCLUDES:

• Scirocco R Rear Spats (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black