Regular Price: $769.00
Special Price $692.00
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Fitment:
PRODUCT FEATURES
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
New European cars come with LED license plate lights standard from factory for good reason. Not only are they more efficient, they provide a defined modern look. Update the exterior ambience of your vehicle to a crisp, 6000k pure white light with the plug n play Golf License Plate LEDs. Fits all VW Golfs 2005-2018 (MK5 Mk6 MK7). New updated variant, now with 24 month warranty.
Fits all Mk5, MK6, MK7, MK7.5 Models, 2003-2019. TSI/TDI/GT/GTI/GTD/R/R32.
Direct Plug N Play
Supernova Exclusive Original Product, Indicators have been a highly sought after LED upgrade for years, up until now they would require dangerously hot resistors to be soldered into the wiring loom or a LED specific flasher relay upgrade. Today, we do one better with an LED that is immensely powerful it does not require resistors.
INFERNO LED Indicator – T20 2Pcs
No Resistors, No Wiring, CANBUS Error Free
Deep Amber LED chips provide a crisp and defined illumination without the need for an Orange diffusor.
INFERNO indicator LEDs are not only a lot brighter than traditional halogen globes, their brightness is not heat dependant. The lack of ramp up and fade out time between flashes provides a super crisp and modern style at night. The average flashing rate is unchanged.
Input Voltage | 12V DC |
Lumens | 1880 |
Socket Size | T20/ 7440 |
Output Angle | 360º |
Current | 1.9A @ 12V |
Body Material | CNC 6063 Aluminium |
Protection | Internal Fuse, Stuck Relay Safety, Overheat Safety |
Warranty | 2 Years |
Regular Price: $79.00
Special Price $69.00
Get a unique sweeping / dynamic / sequential LED appearance by simply upgrading the LED module on your VW Scirocco with our dynamic variant.
Made specifically for the VW Scirocco, incorporating the same socket as OEM for easy install, no further coding or modification needed.
Regular Price: $119.00
Special Price $109.00
VW has encountered a problem with the FSI camshaft and cam follower that could lead to damage to your engine's cylinder head.
This small part can play quite a big role in your engine's well-being. It conveys the movement of your camshaft into power for the high pressure fuel pump by riding directly on the camshaft lobe.
If it becomes worn to the point of breaking it can cause permanent damage to the camshaft, fuel pump, or both. It could also send metal particles into your cylinder head which can cause damage to moving parts. Without replacement, it is common for followers to have holes worn through them.
Replacing this follower as a form of preventative maintenance can save you from spending even more money and time replacing your fuel pump or camshaft from damage caused by a worn follower.
Regular Price: $64.00
Special Price $60.00
Regular Price: $1,199.00
Special Price $1,100.00
The IE MK6 Golf R Cold Air Intake Kit is the perfect intake upgrade for your engine bay. Benefits include added horsepower and torque, perfect MAF scaling, improved throttle response, and increased turbo noise. Peak gains are generally 10 Horsepower and Torque.
Regular Price: $799.00
Special Price $719.96
The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine.
Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.
This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.
The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!
The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.
The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.
Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.
CLICK HERE to view and download the Cold Air Intake install guide
Regular Price: $769.00
Special Price $719.00