Vehicles - IPE - OSIR - Turbosmart - New South Performance - Integrated Engineering - P3 Cars - Autotech
Sale
SHIFT FASTER, DRIVE FASTER
The IE DSG Tune for your Audi B8/B8.5 S4/S5 3.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 3.0T into a fully rounded performance monster.
LEADING FEATURES
Lightning fast gear shifts
Higher shift points of 7200 RPM
Multiple launch RPMs: 3400, 3600, 3800, 4000
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Works flawlessly with all IE ECU Tunes
Unlimited launches (factory defaults to 200)
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
WHAT DOES A DSG TRANSMISSION TUNE DO?
IE’s Audi S4 (DL501 S-Tronic) DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features and upgrades are included at one low cost. A great deal of sportiness is added to the tune while maintaining factory smoothness and driveability that you love about the S4. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve dramatically from a larger useable powerband provided by the higher shift points.
REQUIRED FOR SELECT ECU TUNES
Required for S4 & S5 Stage 2 dual pulley files, your new transmission tune will no longer lug the engine in drive mode or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
ONE TUNE FOR ALL STAGES
IE’s DSG tunes are all-inclusive without any expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset for any level of hardware or ECU Tune Stage, one cost and you are covered for all and any future upgrades from Stage 1 to Stage 2 billion.
USER ADJUSTABLE LAUNCH CONTROL
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
Available Launch Control RPMs:
3400 RPM
3600 RPM
3800 RPM
4000 RPM
*Some early model B8 DSG TCUs cannot have launch control added to them, as well as some replacement Mechatronics units. Non compatible TCU codes include, but may not be limited to 8K1927156AC and 8K1927156AD. You can use your IE Powerlink tool to check your TCU code. Other DSG tune features will function normally.
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your supercharged 3.0T engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The B8 and B8.5 S4 is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tunes were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 3.0T engine and transmission. Perfect for all IE Tunes from Stage 1 to dual pulley and throttle upgrades.
VEHICLE FITMENT
Audi - S4 2008-2016 (B8 & B8.5) 3.0T supercharged engines*
Audi - S5 Coupe 2013-2016 (B8.5) 3.0T*
Audi - S5 Cabriolet 2009-2016 (B8-B8.5) 3.0T*
*IE DSG tunes are available only for vehicles equipped with Audi's 7-speed S-Tronic transmissions. Does not function with manual 6-speed transmission cars.
Regular Price:
$1,199.00
Special Price
$1,100.00
Sale
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.
OBD Multi-Gauge Features:
Boost and Vacuum from OBD2 port
Plug and Play install – just plug into your obd2 port and install into dash!
Optional analog sensor for reading boost on tuned/big turbo cars.
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more!
Optional Auto-Dim or Manual Dimmer
Code Read/Clear
2 x universal 0-5v linear analog inputs
Includes Digital Display, Custom OBD Wire Harness, Control Box.
Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included.
Applicable Models:
Audi TT MK2 / RS
Regular Price:
$605.00
Special Price
$544.50
Sale
P3 OBD2 Multi-Gauge
- Plug and Play install - just plug into your obd2 port and install into dash!
- Reads and clears OBD2 Codes
- OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
- Peak Recall on all functions
- Boost and Vacuum from OBD2 port
- Optional 80psi analog boost sensor
- Optional Auto-Dim or Manual Dimmer
- 2 x universal 0-5v linear analog inputs
- Includes digital display, custom OBD2 wire harness and control box.
Optional 80psi boost sensor
- Allows gauge to read boost directly from intake/charge pipe
- Plugs directly into the OBD2 harness (no wiring required)
- Can be added/removed from the gauge at any time
Tubing kit
- Approximately 60" of 5/32" O.D. flexible plastic tubing
- 5/32" O.D. "T" fitting
- 3 sections of 5/32" I.D. vacuum hose
OEM vent option not available - Fits both left hand drive and right hand drive vehicles
P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more.
Regular Price:
$605.00
Special Price
$545.00
Sale
Compatible with all Mk1 Q5 Models (8R)
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
- OEM Integration - installs in your vent for a sleek install while retaining air flow
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
OEM Vent Option
- We install the display in an OEM vent to make your install even easier
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Need more details?
Check out the V3 install page for configuration and installation info.
Regular Price:
$594.00
Special Price
$535.00
Sale
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Our HPFP Kit can achieve flow rates 50% higher than the original pump, essentially removing pump limitations from the equation, even on high-end turbo upgrades.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
There are many reasons why Autotech’s Kit is superior. Here are a few:
~Each piston (9.8mm) and cylinder in Autotech HPFP kit undergo high-precision grinding processes many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. Not the cheapest way to make them, but the best way.
~Each piston and cylinder are match-ground and serialized to ensure absolute precision and the utmost longevity.
~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. However, the DLC process alone is not enough – it is not a cure for substandard precision – the parts must be engineered specifically for the process to take full advantage: Autotech’s are. The success we have in the field can attest to that.
~HPFP-specific mapping is now commonly available from tuners worldwide.
Tuners trust Autotech’s HPFP in their conversions and upgrades because it works, and works well.
Fits VW/Audi 2.0T FSI 2006-2008.5, MK6 Golf R.
2 kits required for V8 4.2L FSI Audi B7 RS4 / R8 V8 / B8 S5 models.
Regular Price:
$629.00
Special Price
$599.00
Sale
1 kit required: TT RS 2.5L / RS3 Sportback 2.5L / B8 S4 3.0T / SQ5 Q7 3.0T / A6 A7 A8 3.0T / Touareg 3.0T / B8.5 S5 3.0T/ B8 A4 2.0T / B8.5 A4 2.0T
2 kits required: Audi 4.0T, 5.0T TFSI Audi R8 V10 / Lamborghini Gallardo / C6 Audi RS6 / 4.0T Audi S6, S7, RS6, RS7, S8
Also fits Audi Audi 09-14 2.0T B8 A4 A5 A6 Q5 TT 2.0T
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Upon installing the pump, notable increases include 5% Torque increase and an additional 10Bar of fuel rail pressure.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
There are many reasons why Autotech’s Kit is superior. Here are a few:
~Each piston and cylinder in Autotech HPFP kit undergo high-precision grinding processes many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. Not the cheapest way to make them, but the best way.
~Each piston and cylinder are match-ground and serialized to ensure absolute precision and the utmost longevity.
~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. However, the DLC process alone is not enough – it is not a cure for substandard precision – the parts must be engineered specifically for the process to take full advantage: Autotech’s are. The success we have in the field can attest to that.
~HPFP-specific mapping is now commonly available from tuners worldwide.
Tuners trust Autotech’s HPFP in their conversions and upgrades because it works, and works well.
Regular Price:
$629.00
Special Price
$609.00
Sale
The IE MK6 Golf R Cold Air Intake Kit is the perfect intake upgrade for your engine bay. Benefits include added horsepower and torque, perfect MAF scaling, improved throttle response, and increased turbo noise. Peak gains are generally 10 Horsepower and Torque.
Regular Price:
$799.00
Special Price
$719.96
Sale
ADD POWER, TORQUE, AND SOUND
The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine.
LEADING FEATURES
- INCREASED HORSEPOWER & TORQUE
- ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
- HIGH-FLOW BELLMOUTH
- MASSIVE OVER-SIZED AIR FILTER
- BLACK POWDER COAT FINISH
- EASY INSTALL WITH NO MODIFICATIONS
- USES FACTORY MOUNTING GROMMETS & HARDWARE
- HEAT SHIELDING & DIRECTED AIR FLOW
- REINFORCED SILICONE HOSES
- FITS DSG AND MANUAL TRANSMISSIONS
YOUR BUILD DESERVES THE BEST
Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.
STOCK-LIKE DIRECT FIT
This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.
HIGH-FLOW VELOCITY STACK
The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!
THERMAL BLOCKING HEAT SHIELD
The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.
DO YOU NEED AN SAI KIT?
The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.
EASY INSTALLATION
Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.
CLICK HERE to view and download the Cold Air Intake install guide
Regular Price:
$769.00
Special Price
$719.00
Sale
Regular Price:
$769.00
Special Price
$692.00
Sale
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.
TURBO INLET PIPE FEATURES
- Greatly improves air-flow to turbocharger
- Constant high-flow inner diameter
- Easy install, no modifications necessary
- Long life cast aluminum alloy
- In-house CNC machined for perfect fitment
- No leak o ring seal to turbocharger
- Outflows stock inlet by 110CFM
IS YOUR STOCK INLET ROBBING POWER?
The factory installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades.
UPGRADE YOUR TURBO INLET PIPE
The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.
HORSEPOWER RESULTS
Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane
EASY INSTALLATION
Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation. View and download the install guide here (coming soon).
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.
VEHICLE APPLICATIONS
- Audi - A3 2015+ 8V 1.8T & 2.0T engines
- Audi - S3 2015+ 8V 2.0T engine
- Audi - TT 2016+ 8S 2.0T engine
- Audi - TTS 2016+ 8S 2.0T engine
- VW - Golf R 2015+ MK7 2.0T engine
- VW - GTI 2015+ MK7 2.0T engine
- VW - Golf/Alltrak 2015+ MK7 1.8T & 2.0T
- VW - Passat 2013+ B8 1.8T & 2.0T (EA888 Gen 3) engines
- VW - Tiguan 5N 2017+ 2.0T (EA888 Gen 3) engine
Regular Price:
$225.00
Special Price
$219.95