IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!
WHAT DOES THE IE AUDI B9 ECU TUNE DO?
Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!
AVAILABLE AUDI 2.0T STAGES
The IE Stage 1 Audi B9 A4 or A5 TSI tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware or to get the most out of your installed intake and intercooler. In a matter of minutes, your new ECU Tune will deliver a massive boost in performance.
Stage 1 recommended hardware -IE Cold Air Intake -IE Intercooler
Looking to maximize the performance of your stock engine and turbo? IE Stage 2 Upgrade fine-tunes the ECU to match installed aftermarket hardware allowing the turbocharger to breath free and improve power gains across the powerband. This is the maximum power available from a stock turbo car.
Required to flash your tune, The IE POWERlink cable gives you control to unlock your engine’s true potential from your own garage or driveway. Quickly reflash your B9 Audi with your choice of ECU Stage through the cars OBD-II port. Upgrade tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via data-logging.
VEHICLE FITMENT
Audi - B9 A4 Quattro 2016+ with 2.0T engine*
Audi - B9 A5 Quattro 2016+ with 2.0T engine*
Audi - B9 A4 Quattro Allroad 2017+ with 2.0T engine*
*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.
Product Details
The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation.
Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle!
You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device.
In house designed and built in the USA, our Boost Tap includes the following:
Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap
3 Vacuum Ports with 1/4" Hose Barb Fittings
3 Vacuum Set Screws
Medium Strength Thread Lock
OEM Securing Clip
Manifold Pierce Alignment Tools
In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!
Volkswagen Scirocco PFL/FL Side Splitters (Pair)
Details:
Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!
Kit Includes:
Side splitters (pair) to suit pre-facelift and facelift Scirocco R
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Volkswagen Scirocco PFL/FL Rear Valance (3 Piece)
Details:
Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!
Kit Includes:
Spats (pair)
Centre Valance
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
DETAILS: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!
Details:
Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation.
Kit Includes:
Front splitter
Side splitters (pair)
Rear diffuser set WITH adjustable fins
Adjustable front extensions (pair)
Adjustable front winglets (pair)
Adjustable side winglets (pair)
Adjustable rear winglets (pair)
2 Flow Designs Stickers
Fitting kit
Material:
Front splitter, side splitters, rear diffuser valance: 10mm thick polyethylene composite, bevelled edges
Extensions & winglets: 4.5mm thick textured ABS
Finish:
Hand polished satin black
Rear diffuser fins and accessories: scratch resistant textured ABS plastic
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Details:
Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear spats valance & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation.
Kit Includes:
Front splitter
Side splitters (pair)
Rear spats valance set (no adjustable fins)
Adjustable front extensions (pair)
Adjustable front winglets (pair)
Adjustable side winglets (pair)
Adjustable rear winglets (pair)
2 Flow Designs Stickers
Fitting kit
Material:
Front splitter, side splitters, rear spats valance: 10mm thick polyethylene composite, bevelled edges
Extensions & winglets: 4.5mm thick textured ABS
Finish:
Hand polished satin black
Rear diffuser fins and accessories: scratch resistant textured ABS plastic
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation.
Details:
Why is our splitter so strong? Our front splitter for the MK3.5 ST features 2nd piece which forms a bridge that is bolt together at specific points to create a brace that spans along the centre of the splitter.
When installed onto your bumper using specially designed steel brackets and mounting hardware (supplied), your bumper is reinforced and our splitter can take on all the scrapes protecting your bumper.
The pre-installed brass thread will accept our adjustable front winglets and extensions, create your own style with our bolt-on accessories which are sold separately.
Front extensions and winglets are sold separately.
Kit Includes:
Splitter (2 piece)
Threaded brass fittings (Pre-Installed)
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better, isn’t it?
As strong and light as Carbon fiber is, it CRACKS on impact or when under load and/or stress. Clearcoat will eventually fade & cracks and become undesirable.
Details:
Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation.
Front splitter sold separately.
Kit Includes:
•Front winglets (pair)
•2 Flow Designs Stickers
•Fitting kit
Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation.
Details
Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you.
We also have designed in visual prompts so you know exactly where the splitter is meant to sit in relevance to the OEM side skirt.
The pre-installed brass thread will accept our adjustable side winglets which are sold separately as a bolt-on accessory to suit our side splitter. These can be viewed HERE.
Side winglets are sold separately.
Kit Includes:
Side splitters (pair)
Threaded brass fittings (pre-installed)
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better, isn’t it?
As strong and light as Carbon fiber is, it CRACKS on impact or when under load and/or stress. Clearcoat will eventually fade & crack and become undesirable.