CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.
These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.
There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.
Generation
Make | Model | Year | Generation |
---|---|---|---|
MERCEDEZ-BENZ | AMG GT 63 | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | AMG GT 63S | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | E63 | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | E63S | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | G63 | 2019 - 2020 | W463 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | C217 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | W222 |
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
Release that extra power of your Golf VII GTI with LEYO High Flow Racing 200 cell Catalytic Downpipe. LEYO Motorsport R&D team had spent numerous hours on both Dyno and track to achieve a downpipe which is second to none. Employing 3’inch piping made with high grade T304 stainless steel for long lasting corrosion free durability, V band connection is incorporated for ease of installation and leak-free operation.
​
This downpipe system is also compatible with your OEM Catback.
* This product is only for use in the race track.
Specifications:
3’inch 304 stainless steel Downpipe.
Direct bolt on.
Compatible with OEM Downpipe.
Highest TIG hand Welding.
Leak free V band connection.
200 Cell high flow racing catalytic.
To get the most out of your turbo, an upgrade to the intercooler is a must. Made from the best quality tube and fin intercooler cores, Leyo Motorsport’s performance Intercooler provides better flow of air while lowering boost air temperature. This increases the oxygen density that enters the engine which amplifies power and better fuel economy. Leyo intercooler has the following core size 630mm x 413mm x 50mm providing over 60% more volume than OEM intercooler.
*This product is only for use on the race track.
Specifications:
Increased Cooling Capacity.
Increased Flow.
Increased Air Density.
Increase horsepower.
Core size 630x413x50mm
Description:
We heard you ... Ever since the release of our ever popular MK7 GTI Turbo back exhaust we heard the request to chase away the cat. And now here it is, gone is the 200 CEL racing cat, in its place is just the hollow pathway that quickens the exhaust gas's release. Now you can smile even wider every time you mash the gas outside your ex's home.
Specifications:
3’inch 304 stainless steel Downpipe.
Direct bolt on.
Compatible with OEM Downpipe.
Highest TIG hand Welding.
Leak free V band connection.
Regular Price: $34.95
Special Price $29.00
Regular Price: $1,097.00
Special Price $932.11
We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.
This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally, we finished the assembly by balancing it on a VSR high-speed balancer.
This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.
Features:
Fitment:
NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.
Gaskets, wastegate actuator, turbo outlet fitting not included.
Regular Price: $2,999.00
Special Price $2,399.00