This will replace OEM part numbers 06H 145 710D, 06F 145 710G, & 06H 145 710 C
Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CJXB, CZPA, and CJXC;US codes CPLA and CPPA) including Golf MK7 R
This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp!
This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
In The Box:
1 x FMDVMK7R Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker
Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered
This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA) including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!
Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.
Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!
This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.
⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐
⭐ Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐
⭐ Easy installation and sounds fantastic! Money well spent ⭐
In The Box:
1 x FMDVMK7A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker
Regular Price: $399.00
Special Price $350.00
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
· Stainless Steel Rivets
· Stainless Steel Fasteners
· Carbon fabric Outer Shell
· Calcium Magnesium Silicate Wool constructed Inner Core
· High temperature silica fabric
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C
· Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C
· Radiant Heat Limit: 2500°F/1371°C
Complimentary Products
THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES
The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.
⭐ Excellent quality product & easy to fit ⭐
The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.
The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
As with all Forge products, this hose comes with a lifetime warranty*
Regular Price: $375.00
Special Price $349.00
FMKT024 – Audi RS3 (8V chassis), and Audi TTRS (8S)
A set of four boost hoses and air box coupler hose for the Audi RS3 and Audi TTRS - Please note the airbox hose (centre of the kit image) does not fit the DNWA and DAZA engine codes. This hose kit includes the intercooler inlet and outlet hoses (two largest hoses seen in the kit image), throttle body hose located at feed into alloy inlet manifold elbow (straight reducer seen in the kit image), and turbo outlet hose (two smallest hoses in the kit image, one being an alternative for the facelift 8V models).
The Forge silicone hoses in this kit are Fluorosilicone lined to prevent oil vapour penetration throughout the inner hose wall. Fluorosilicone lining also renders the kit suitable to be used with either modern long-life coolants or Organic Acid Technology coolants (O.A.T.).
The use of a Fluorosilicone lining ensures that Forge silicone hoses are the clear market leader.
This durable Forge Motorsport silicone hose kit has been designed to withstand pressures experienced in both tuned and remapped Audi RS3 and TTRS engines, long outlasting the original hoses. This high quality hose kit is covered by the limited lifetime Forge Motorsport warranty, keeping you on the road and ahead of the pack!
This set of hoses is available in red, blue or black finish, an added aesthetic option for this high quality hose kit.
*T&C's Apply
This is a CTS Turbo universal 3.5″ cone filter, it has a tapered design primarily used in our MK7 GTI/GOLF R, B9 AUDI A4, B8/B8.5 S4, S5 intake kits. These filters can also be used in a custom big turbo application.
Product Details:
3.5″ Inlet x 8.0″ Long x 6.0″ Wide
High quality moulded silicon base and cap
Stainless steel clamp
Fitment:
We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.
This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally, we finished the assembly by balancing it on a VSR high-speed balancer.
This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.
Features:
Fitment:
NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.
Gaskets, wastegate actuator, turbo outlet fitting not included.
Regular Price: $2,999.00
Special Price $2,399.00
This high-quality IE Valve Spring & Titanium Retainer kit features spring rates optimized to match your 2.0T FSI/TSI specifications and provide proper valve control preventing valve float in high-power and high-revving applications.
Increasing your engine's power output often comes with modifications that require more RPMs to get the most out of it, such as larger turbochargers, tuned intake manifolds, and high-output software tunes. Upgrading those components without changing out the valve springs can leave you with a short power band or cause valve float and other significant damage.
Other cheap valve spring kits are often designed by simply finding a spring that is stiffer and will fit. Those are also not usually a good compromise because many times they are the wrong stiffness, and often poorly constructed. A broken valve spring can cause total engine failure and destroy everything that you have put hard work and money into. Our kits are the only spring and retainer kits on the market designed by someone with a working knowledge of the unique valvetrain in the VW & Audi EA113 FSI engines, and what the spring requirements actually are.
Manufactured out of the best spring wire in the world IE valve springs use a patented multi-stage shot peening process that further reduces failure rates. Our titanium retainers are machined with an excellent surface finish and tight tolerance control for a long lifespan. Each application is thoroughly tested to perform on these engines right here in our test facility in Salt Lake City, Utah. Our spring and retainer kits are the best matched, most tested parts on the market. Purchasing a set will ensure that your engine runs at maximum performance and reliability.
Regular Price: $1,015.00
Special Price $985.00
This is a CTS Turbo universal 3″ low profile cone filter, it has a tapered design to fit in tight spots. These filters are used in our MK4 1.8T, 2.0T FSI, 2.oT TSI, B8 A4 intake kits. Also these filters can also be used in a custom big turbo application.
3.0″ Inlet x 8.0″ Long x 5.0″ Wide
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
This is a replacement air filter for CTS Turbo Intake - CTS Turbo 8V.2 RS3 FL / 8S TTRS EVO Intake (2018+)
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
Fitment: