Vehicles - CTS Turbo - Turbosmart - New South Performance - SuperPro - Autotech
Sale
Description
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Vehicle Application Information:
Axle alignment required after fitting.
Compatibility
2018+ Hyundai i30N - PD N-Performance
2008+ Hyundai iLoad - TQ
02/2008+ Hyundai iMAX - TQ
2006-2012 Hyundai SANTA FE - CM
Regular Price:
$113.00
Special Price
$95.40
Sale
Compatibility
2018+ Hyundai i30N - PD N-Performance
2008+ Hyundai iLoad - TQ
02/2008+ Hyundai iMAX - TQ
2010-2015 Hyundai ix35 - LM
2015+ Hyundai TUCSON - TL
Regular Price:
$200.00
Special Price
$169.42
Sale
Compatibility
2018+ Hyundai i30N - PD N-Performance
2008+ Hyundai iLoad - TQ
02/2008+ Hyundai iMAX - TQ
2010-2015 Hyundai ix35 - LM
2015+ Hyundai TUCSON - TL
Regular Price:
$200.00
Special Price
$169.42
Sale
Compatibility
2018+ Hyundai i30N - PD N-Performance
2008+ Hyundai iLoad - TQ
02/2008+ Hyundai iMAX - TQ
2010-2015 Hyundai ix35 - LM
2015+ Hyundai TUCSON - TL
Regular Price:
$200.00
Special Price
$169.42
Sale
Description
SuperPro Engine Steady Mount Bush Kit
Compatibility
2018+ Hyundai i30N - PD N-Performan
Regular Price:
$45.00
Special Price
$37.87
Mandrel bent aluminum piping with durable black powder coating
- CNC machined MAP flange
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps
Sale
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
- Ball for low friction and long life
- Elminate sway bar flex for consistent handling
- Spanner provision for on-car adjustment
- Suitable for application on lowered or raised vehicles
Features and Benefits:
- 6060-T5 Alloy Link Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
- SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
Regular Price:
$199.00
Special Price
$168.90
CTS Turbo is proud to announce an official release of our new K04 Upgrade for 2.0T FSI/TSI Transverse Engines.
Our engineers designed the compressor cover and exhaust housing to work with the larger K04 CHRA, exactly how intended. While other manufacturers simply install a larger K04 CHRA into a small factory-spec housing.
Beware of these hybrid builds, they are not made to provide optimal flow for the larger turbine wheel and can lead to poor performance and premature failure.
High-quality castings are CNC machined to replace your factory turbocharger and do not require any additional parts to be installed. All you need to run this K04 2.0T FSI/TSI Transverse Turbocharger Upgrade is a tune for your ECU and a performance downpipe.
This kit is by far the best ‘bang for the buck’ modification available for VW and Audi enthusiasts with the 2.0T FSI and 2.0T TSI engine. With proper tuning and supporting mods, this turbo will support 350HP/360TQ!
Features:
CTS-spec K04 CHRA with heavy-duty thrust bearings
Billet compressor wheel (MFS – machined from solid)
K04-specific compressor and turbine housing. NOT A HYBRID!
OEM+ manufacturing tolerances
VSR high-speed balanced
Direct-fit factory replacement
OEM installation kit included
Compatible with any K04-specific tune
Compatible with factory turbo outlet pipe (both FSI and TSI). Not compatible with aftermarket stock turbo outlet pipes
ROW vehicles, please confirm fitment with your CTS Turbo dealer.
Additional parts required:
K04-specific software tuning
CTS Turbo or other performance downpipe
Additional parts recommended:
CTS Turbo Cold Air Intake
CTS Turbo Direct-Fit Intercooler Kit
CTS Turbo High Flow Turbo Outlet Pipe (EA888 only)
S3 Fuel Injectors and HPFP upgrade (EA113 engines only)
Sale
CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower. In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.
This turbo blanket fits all IHI turbos found on MQB platform cars
IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD
IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro
IS38 Turbos found on the MK7 Golf R and 8V Audi S3
CTS Turbo Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2100 Deg F
Continuous Use Limit: 1800 Deg F
Exterior Surface:
Direct Contact Limit: 800 Deg F
Radiant Heat Limit: 1200 Deg F
Regular Price:
$199.00
Special Price
$189.00
Sale
Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!
CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA
Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.
We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.
Features:
- CAD optimized for maximum flow, 56% larger than factory
- Cast aluminum throttle body elbow, billet aluminum spacer
- CNC machined in house for perfect fitment
- Direct replacement for factory parts between the cold side of the intercooler and the throttle body
- HP gain of up to 20hp on stock turbo, even more with big turbo upgrades
- Compatible with factory intake, CTS Turbo intakes and most other popular intakes (not compatible with Eventuri intake)
- Compatible with factory and aftermarket intercoolers
- Includes a large-bore 2.75″ charge pipe and custom silicone couplers
- Two extra 1/8″ NPT bungs on the charge pipe for watermeth nozzles
- Compatible with 1-bolt and 2-bolt pressure sensors
- DV flange is based on factory design
- Includes hoses and fittings to install on 2019+ DNWA engines
Fitment:
- 8V and 8V.2 Audi RS3 (2018-2020) – DAZA and DNWA models
- 8S Audi TT-RS (2018-2020) – DAZA and DNWA models
Regular Price:
$699.00
Special Price
$629.00