Vehicles - CTS Turbo - Integrated Engineering - XFORCE - P3 Cars - Eibach - Flow Designs
Black anodized for stealth/oem type appearance
CNC machined from 6061 Aluminium
Brass plug included with manifold plug
O-rings included for great seal
Manifold plug can double as boost tap
Sale
Efficient bar and plate construction
- Direct bolt-in installation
- 4-ply silicon hoses and billet adapter to turbo outlet pipe
- High quality stainless steel clamps
- Low pressure drop
- Maintains factory mounting points
- No trimming of bumper or crash supports
- Rated for power levels in excess of 600HP
- Core dimensions: 23.00 Length x 2.00" Tall x 16.5" Height
- Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers
Regular Price:
$1,499.00
Special Price
$1,349.00
The CTS Turbo Golf R Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.
Sale
One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.
Regular Price:
$184.00
Special Price
$179.00
Stop missing shifts and your friends will stop laughing at you.
Eliminate free-play and slop in your factory shifter bracket by replacing soft factory rubber bushings.
Keep your shifts crisp and smooth; and stay ahead of the pack!
Kit includes:
3 x shifter bracket bushings (upper and lower halfs)
This part fits the following transmissions:
MK3: 02A ONLY
MK4: 02J, 02M
MK5: 02Q
MK6: 02Q
MK7: 6MT
At CTS Turbo we are proud to announce our new air intake system for the B8/B8.5 Audi A4/A5 with Gen2 EA888 2.0T engines.
Package price for this set includes:
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
Please note you are receiving a special price when you purchase the Hyundai i30N Hatch PD complete body kit splitter set.
DETAILS
The i30N PD Hatch body kit splitter set includes front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear pods/spats and our full accessories range of front extensions and winglets all round. Easy installation instructions are included and the i30N range does not require bumper removal. We guarantee our i30N body kit splitter set is the most durable on the market and will complete your exterior aesthetic by giving it a more aggressive look.
The i30N body kit range shares the same durability and technology as our renowned WRX, Golf GTI and R and Focus RS line up which is trusted by car enthusiasts worldwide.
All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES
- i30N front lip splitter & Aerospacers
- i30N front splitter reinforcement brackets (pair)
- i30N side skirt splitters (select one or two pairs)
- i30N Flow-Lock rear diffuser & Aerospacers
- i30N rear lip spats/pods & Aerospacers (pair)
- i30N adjustable front extensions (pair)
- i30N adjustable front winglets (pair)
- i30N adjustable side winglets (pair)
- i30N adjustable rear winglets (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL
- Front lip splitter, side skirt splitters, valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
FINISH
- Hand polished satin black
- Flow-Lock diffuser fins: scratch resistant textured ABS plastic
- CNC engraved logo and features
Regular Price:
$1,505.00
Special Price
$1,430.00
Preorder Special
I30N300: $25 AUD off preorders over $300 AUD
I30N600: $50 AUD off preorders over $600 AUD
I30N1000: $100 AUD off preorders over $1,000 AUD
Limited to the first 15 customers and ends 7 December 2019. Please note all preorders made will be manufactured and shipped after this date.
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
The i30N front lip splitter will include a pair of stainless steel reinforcement brackets enhancing the overall strength of the splitter.
Details
Our i30N Hatch (PD) body kit splitter set includes a front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear pods/spats & our full accessories range (winglets & extensions). With easy to follow installation instructions, these extremely durable lip splitters will complete your i30N with a more aggressive look & feel.
All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
Brass threads located on each side will for easy installation of our adjustable front winglets and front extensions, creating your own style with our bolt-on accessories range (sold separately).
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Kit Includes
i30N Hatch PD front lip splitter
Pre-mounted adjustable Aerospacers
Reinforcement brackets (pair)
2 Flow Designs stickers
Fitting kit
Material
10mm thick polyethylene composite, bevelled edges
Finish
Hand polished satin black
FAQ
Why do you use polyethylene composite for your products?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!)
How is your splitter so strong?
The splitter becomes an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper.
Pre-assembled Aerospacers are bolted down perpendicularly to create a brace that reinforces the splitter and evenly spreads the load from impacts across the surface. It also allows the front lip splitter to follow the body kit contour to keep it flat and level.
What about carbon fibre?
As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.
https://cdn.shopify.com/s/files/1/0019/9858/5926/files/HYUNDAI_i30N_-_SIDE_SPLITTER_INSTRUCTIONS_pg_1_2.pdf