Vehicles - Forge Motorsports - IROAD - Turbosmart - H&R Springs - SuperPro - Flow Designs - INA - Autotech
Sale
Improve the handling of your FWD Audi A3 or Volkswagen Golf Mk7 FWD
Eliminates sway bar link flex
Regular Price:
$1,097.00
Special Price
$932.11
Details:
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Prefacelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Sportback by far, with a simple to follow installation process.
Kit Includes:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Details:
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Facelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Hatch by far, with a simple to follow installation process.
KIT INCLUDES:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Regular Price:
$379.00
Special Price
$359.00
Details:
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Facelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Hatch by far, with a simple to follow installation process.
Kit Includes:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 by far, with a simple to follow installation process.
KIT INCLUDES:
- Splitters (Pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL:
- 10mm thick polyethylene composite, bevelled edges
FINISH:
- Hand polished satin black
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Prefacelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Sportback by far, with a simple to follow installation process.
KIT INCLUDES:
- Splitter
- 2 Flow Designs Stickers
- Fitting kit
MATERIAL:
- 10mm thick polyethylene composite, bevelled edges
FINISH:
- Hand polished satin black
Regular Price:
$379.00
Special Price
$359.00
Sale
- Plug and play compatability
- 400% stronger than the OE Diverter Valve
- Designed to handle boost pressure up to 30PSI
- Ideal for lightly modified vehicles
The Turbosmart Kompact EM Series combines world leading electronics and more than two decades of blow off valve technology for rapid response and unbeatable performance. The Turbosmart EM Series is a plug and play upgrade for OE electronic diverter valves that are prone to cracking under pressure. Featuring a patent-pending pressure control, the Turbosmart Kompact EM Series are faster than the OE unit and will not leak under pressure.
Features:
- Plumb Back
- Patent pending integrated pressure control
- Plug and play compatability
- Integrated proprietary high-temperature solenoid valve
- 400% stronger than the OE unit
Regular Price:
$330.00
Special Price
$310.21
H&R Sport Springs - Volkswagen Golf R Wagon (MK7)
Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle’s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.
H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany.
Features:
Lowers the center of gravity
Reduces body roll
Reduces wheel gap
Lower wind resistance
Front Drop: 25mm
Rear Drop: 25mm
DETAILS
Protect your bumper from scrapes or kerbing with our MK7 Golf R front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
MK7 Golf R front extensions and MK7 Golf R front winglets sold separately.
KIT INCLUDES
- MK7 Golf R front lip splitter
- Pre-mounted adjustable Aerospacers
- Stainless steel crossbar mounts (pair: left & right)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
DETAILS
Protect your body work from scrapes or kerbing with our MK7 Golf R side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
Installation is simple with pre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.
We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf R chassis.
The pre-installed brass thread allow for installation of our MK7 Golf R adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters.
KIT INCLUDES
- MK7 Golf R side skirt splitters (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black