You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Vehicles - Integrated Engineering - Flow Designs - Ingo Noak

Set Descending Direction

   

Items 1 to 10 of 213 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Flow Designs - Accord Euro CL (PFL/FL) Rear Window Vents (Pair)

    https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf
    $175.00
  2. IE VW MK7 & Audi 8V DSG (DQ250) Transmission Tune | Fits MK7 GTI / A3 & MK7 Golf R / S3 w/ 6 Speeds ONLY IE VW MK7 & Audi 8V DSG (DQ250) Transmission Tune | Fits MK7 GTI / A3 & MK7 Golf R / S3 w/ 6 Speeds ONLY
    Sale

    IE VW MK7 & Audi 8V DSG (DQ250) Transmission Tune | Fits MK7 GTI / A3 & MK7 Golf R / S3 w/ 6 Speeds ONLY

    SHIFT FASTER, DRIVE FASTER

    Don't short shift your ECU tune and performance parts, get the most out of your modifications with the IE DSG Transmission tune for 2015+ Golf R, GTI, A3, & S3 2.0T. Instantly gain increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and a true performance tuned transmission. Acceleration times will greatly improve transforming your 2.0T into a fully rounded performance monster.

    LEADING FEATURES

    • Required for high torque IE ECU tunes
    • Lightning fast gear shifts
    • Higher shift points of 6900 RPM
    • Kick down in manual mode eliminated
    • Lag time reduced when starting off in first gear
    • Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000  
    • Drive shift mapping entirely reworked with an enthusiast in mind
    • Flashed directly through OBD-II Port (No TCU removal required)
    • Increased clutch pressure on tap for higher torque without slip
    • Temperature protection remains for safety
    • Gear hunting reduced
    • Gearbox “Torque Limiters” removed

    WHAT DOES A DSG TRANSMISSION TUNE DO?

    The IE DSG Tune for the MQB 2015-2017 Golf R / S3 and 2015-2018 GTI / A3 is expertly calibrated to deliver the full performance potential from your existing ECU tune and modifications. This transmission file retunes the complicated DSG mapping and completely reworks the shift points in drive, sport, and manual shifting. This delivers much, much faster and stronger shifts taking time directly off the 0-60 and ¼ mile times making the car more reliable and fun to drive.   

    REQUIRED FOR SELECT ECU TUNES

    Required for MQB Stage 1 high torque and all Stage 2 tune files, your new transmission tune will no longer lug the engine in drive mode, or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. To get the most out of your tune investment, a lot of features have been added to make a fully rounded performance vehicle with more aggressive launches, faster shifting, higher RPM, and optimized shift points, and selectable launch control. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. 

    ONE TUNE FOR ALL STAGES

    IE’s DSG tunes are all-inclusive without any expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset for any level of hardware or ECU Tune Stage, one cost and you are covered for all and any future upgrades. 

    USER ADJUSTABLE LAUNCH CONTROL

    The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

    Available Launch Control RPMs:

    • 3200 RPM
    • 3400 RPM
    • 3600 RPM
    • 3800 RPM
    • 4000 RPM

    IE DSG TUNE TECHNICAL FEATURES

    HIGHER SHIFT POINTS
    Utilize the whole powerband of your turbocharged VW or Audi engine without the DSG interfering and shifting early.

    DRIVE MAPPING REWORKED
    The MQB 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.

    INCREASED CLUTCH PRESSURE
    Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. 

    FLASHED THROUGH OBD-II PORT
    There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.

    TAKE-OFF LAG REDUCED
    The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.

    MULTIPLE LAUNCH RPMS
    The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

    KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE

    The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain

    FLAWLESS OPERATION WITH IE ECU TUNES
    The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI Gen 3 engine and transmission.

    VEHICLE FITMENT

    • VW - Golf R 2015-2017 (MK7/MK7.5) W/DSG TRANSMISSION
    • VW - GTI 2015-2018 (MK7/MK7.5) W/DSG TRANSMISSION
    • AUDI - S3 2015-2017 (8V) W/ DSG TRANSMISSION
    • AUDI - A3 2015-2018 (8V) W/ DSG TRANSMISSION

    Regular Price: $999.00

    Special Price $899.00

  3. IE Replacement 5″ Air Filter For IE Intake Kits

    IE cone filters are specifically designed for high-flow and perfect fitment to the integrated velocity stack found on most IE cold air intake kits. This is a dry filter that can be oiled, however, we do not recommend air filter oiling on turbocharged or forced induction vehicles. The filter can be cleaned and re-used many times. If you find it difficult to clean your filter or find it severy stained, it may be time to replace the filter element. This is a direct replacement filter ready to keep your car on the road and performing at its best. Includes new filter clamp.
    $99.95
  4. Flow Designs - Lancer Evolution X Window Vents (Pair)

    https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf
    $175.00
  5. Flow Designs - MK3 Focus RS Rear Spoiler Extension

    FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
    $399.00
  6. Flow Designs - MK7 Golf R Wagon Rear Aero Valance & Pods/Spats

    DETAILS

    The VW MK7 Golf R splitter set from Flow Designs includes a front splitter with Aerospacers, side splitters, rear spats & rear valance. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.


    KIT INCLUDES

    • MK7 Golf R rear aero valance
    • MK7 Golf R rear pods/spats (pair)
    • 2 Flow Designs stickers
    • Fitting kit

    MATERIAL

    • 10mm thick polyethylene composite, bevelled edges

    FINISH

    • Hand polished satin black
    $304.00
  7. IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P
    Sale

    IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P

    The Integrated Engineering MK5/MK6 FDS intercooler system was built from the ground up to offer the ultimate in performance for your vehicle. When increasing the power output of your engine it is extremely important to ensure it has the proper cooling to match. It packs a very large intercooler core into the space available, a full 54% larger than the OEM core. This large core delivers cool air to the engine under all circumstances, increasing power and torque and simultaneously reducing heat soak.  

    Regular Price: $1,899.00

    Special Price $1,769.00

  8. IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17 IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17
    Sale

    IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17

    One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.

    Regular Price: $184.00

    Special Price $179.00

  9. IE Audi 2.0T TSI Cold Air Intake | Fits B8/B8.5 A4 & A5 (2009-2013) IE Audi 2.0T TSI Cold Air Intake | Fits B8/B8.5 A4 & A5 (2009-2013)
    Sale

    IE Audi 2.0T TSI Cold Air Intake | Fits B8/B8.5 A4 & A5 (2009-2013)

    LEADING INTAKE FEATURES

    • Increased airflow - Get the most out of your upgrades
    • High-flow velocity stack - True performance design
    • Sealed heatshield - Separates cold air from engine bay heat
    • Perfect fitment - No modifications required to bolt-on
    • Amazing sound - Releases awesome turbo and engine noise
    • Looks great - Black powder coat, tight clearances, clean angles 

    AUDI B8 A4 & A5 COLD AIR INTAKE

    You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.

    EASY INSTALLATION

    Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.

    VEHICLE FITMENT

    • Audi - A4 2009-2015 (B8-B8.5) 2.0T
    • Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
    • Audi - A5 2009-2015 (B8-B8.5) 2.0T

    Regular Price: $761.00

    Special Price $719.00

Set Descending Direction

   

Items 1 to 10 of 213 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5