Currently Shopping by
-
Custom Stock Status:
Dropship
Exclusive Boxing Day Sale
- Filter By cosmetics
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Vehicles
Flow Designs - VW MK8 Golf GTI Rear Spoiler Extension
DESCRIPTION
Suitable for MK8 Golf GTI model
DRILLING INTO OEM SPOILER REQUIREDDETAILS:
Complete the aero aesthetic of your Volkswagen MK8 Golf GTI with our newly developed spoiler extension! The rear spoiler extension has been designed and developed in-house at our Bayswater factory in Australia, with our team focused on providing another customisation option for your VW Golf!The Flow Designs Rear Spoiler Extension was designed to be reversible. Meaning, one side of the spoiler extension is gloss black and the other is textured matte with an engraved Flow Designs logo. It can be installed gloss side up or matte side up, depending on your personal taste, with darkened hardware included for a clean overall look once installed.
Spoiler removal is not required for installation.
Be the FIRST to experience the Flow Designs MK8 Golf GTI rear spoiler extension, as these are newly developed with extremely limited quantities available!
KIT INCLUDES:
- MK8 Golf GTI Rear Spoiler Extension
- x4 black dress up bolts
- x2 Flow Designs stickers
- Install instructions
- x1 EDITION 1 stickers (limited to first production run preorder purchases)
MATERIAL & FINISH:- 4.5mm acrylic (scratch resistant on the matte side)
- Spoiler: gloss underside, matte topside (can be installed either side up)
- CNC engraved logo and features
- Install Instructions (PDF)
$269.00
Flow Designs - VW MK8 Golf GTI Full Lip Splitter Set - All Accessories
DESCRIPTION
Suitable for MK8 Golf GTI modelDETAILS:
Get the original and best MK8 Golf GTI splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being one of the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product.The MK8 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK8 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:- MK8 Golf GTI front lip splitter & bumper reinforcement plate
- MK8 Golf GTI side skirt splitters (pair)
- MK8 Golf GTI Flow-Lock rear diffuser
- MK8 Golf GTI rear spats/pods (pair)
- WITH All Accessories: MK8 Golf GTI adjustable front winglets (pair)
- WITH All Accessories: MK8 Golf GTI adjustable side winglets (pair)
- WITH All Accessories: MK8 Golf GTI adjustable rear winglets (pair)
- WITH All Accessories: MK8 Golf GTI adjustable front extensions (pair)
- x2 Flow Designs stickers
- x1 Flow Designs air freshener
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- Front lip splitter, side skirt splitters, rear valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges, impact-resistant
- Hand polished satin black
- Flow-Lock fins, winglets and extensions: scratch resistant textured ABS plastic
- Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
- Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
- Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
- HOW STRONG A
$1,780.00
Flow Designs - VW MK8 Golf GTI Rear Spats (Pair)
DESCRIPTION
Suitable for MK8 Golf GTI modelDETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.Our adjustable rear spat winglets will bolt directly onto our MK8 Golf GTI rear spats thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.VW MK8 Golf GTI Rear Spat Winglets are only compatible with Flow Designs MK8 GTI Rear Spats which is designed to be an adjustable direct bolt-on accessory.
MK8 Golf GTI Rear Spat Winglets (Pair) sold seperately
KIT INCLUDES:
- MK8 Golf GTI Rear Spats (pair)
- 2 Flow Designs stickers
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$132.00
Flow Designs - VW MK8 Golf GTI Rear Spat Winglets (Pair)
DESCRIPTION
Suitable for MK8 Golf GTI modelDETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.Our adjustable rear spat winglets will bolt directly onto our MK8 Golf GTI rear spats thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.VW MK8 Golf GTI Rear Spat Winglets are only compatible with Flow Designs MK8 GTI Rear Spats which is designed to be an adjustable direct bolt-on accessory.
MK8 Golf GTI Rear Spats (Pair) sold seperately
KIT INCLUDES:
- MK8 Golf GTI Rear Spat Winglets (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH:- 4.5mm thick ABS plastic
- Scratch resistant textured ABS plastic
$69.00
P3 Cars V3 OBD2 Vent Multi-Gauge - VW Golf MK8 R
P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.
Product Description
P3 Cars OBD2 Multi-Gauge for VW Golf MK8 R – Blue Bars / White Digits
P3 V3 Gauge Features
-
- Plug and Play Install – plugs directly into your OBD2 port (want to keep your OBD2 port open?
- OEM Integration – installs the dash and cluster trim for a sleek install
- Versatility – read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing – read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Engine oil temperature (GTI and Golf R)
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
- Plug and Play Install – plugs directly into your OBD2 port (want to keep your OBD2 port open?
Optional Add-Ons
- Analog Oil Pressure Sensor – DON’T RELY ON AN OIL PRESSURE LIGHT ALONE! See your ACTUAL oil pressure with our 0-150 psi analog pressure sensor.
- P3 Analog Boost sensor – plugs directly into gauge harness, no wiring required)
- Boost tubing kit – Approx. 5′ of 5/32″ O.D. flexible plastic boost tubing with vacuum “T” and 3 sections of 5/32″ I.D. vacuum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit – this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter – attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
- Wideband o2 Sensor Kit – Everything you need to add a wideband o2 sensor to your exhaust. Ties to P3 gauge analog input with single wire
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don’t care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don’t.
No more bulky pillar or column pods… No more squinting to read tiny pixelated screens… While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it’s bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We’ve got that covered too.
We’ve torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Please Note- The gauge does not come pre-installed in the air conditioner vent. Vent is not included.
- We only stock gauges for Right Hand Drive vehicles
Regular Price: $689.00
Special Price $550.00
-
P3 V3 OBD2 - VW Mk8 Gauge (2020+)
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open?
- OEM Integration - installs the dash and cluster trim for a sleek install
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Engine oil temperature (GTI and Golf R)
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Regular Price: $689.00
Special Price $550.00
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open?
Flow Designs - MK8 Golf R Front Lip Splitter Extensions (Pair)
DESCRIPTION
ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGETo celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!
To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!
If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.
Suits MK8 Golf R models
INSTALL DOES NOT REQUIRE BUMPER REMOVALDETAILS:
Our adjustable front lip splitter extensions will bolt directly onto our MK8 Golf R front lip splitter thanks to the Pre-Pressed threaded brass fittings installed into the splitter. adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Flow branded black stainless hardware will be provided to ensure perfect fitment and adjustability.Our MK8 Golf R body kit range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Front lip splitter & front winglets sold separately.
KIT INCLUDES:
MK8 Golf R adjustable front lip splitter extensions
2 Flow Designs stickers
Fitting kit with black stainless hardware
MATERIAL & FINISH:
4.5mm thick ABS plastic
Scratch resistant textured ABS plastic$89.00
Flow Designs - MK8 Golf R Front Lip Splitter Winglets (Pair)
DESCRIPTION
ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGETo celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!
To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!
If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.
Suits MK8 Golf R models
INSTALL DOES NOT REQUIRE BUMPER REMOVALDETAILS:
Our adjustable front lip splitter winglets will bolt directly onto our MK8 Golf R front lip splitter thanks to the Pre-Pressed threaded brass fittings installed into the splitter. adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Flow branded black stainless hardware will be provided to ensure perfect fitment and adjustability.Our MK8 Golf R body kit range range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Front lip splitter & front extensions sold separately.
KIT INCLUDES:
MK8 Golf R Front Lip Splitter Winglets (Pair)
2 Flow Designs stickers
Fitting kit with black stainless hardware
MATERIAL & FINISH:
4.5mm thick ABS plastic
Scratch resistant textured ABS plastic$79.00
Flow Designs - MK8 Golf R Side Skirt Splitter Winglets (Pair)
DESCRIPTION
ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE
To celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!
If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.
Suits MK8 Golf R models
INSTALL DOES NOT REQUIRE SIDE SKIRT REMOVALDetails:
Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf R side skirt splitter thanks to the Pre-Pressed threaded brass fittings installed into the splitter. adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Flow branded black stainless hardware will be provided to ensure perfect fitment and adjustability.Our MK8 Golf R body kit range range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Side skirt splitters sold separately.
KIT INCLUDES:
MK8 Golf R Side Skirt Splitter Winglets (pair)
2 Flow Designs stickers
Fitting kit with black stainless hardware
MATERIAL & FINISH:
4.5mm thick ABS plastic
Scratch resistant textured ABS plastic$79.00
Flow Designs - MK8 Golf R Rear Spats (Pair)
DESCRIPTION
ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE
To celebrate the upcoming release of the latest Flow Designs Edition One kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!
If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.
Suits MK8 Golf R models
INSTALL DOES NOT REQUIRE BUMPER REMOVALDETAILS:
Continue the aggressive aesthetic of your MK8 Golf R rear with our rear spats - known for their durability and strength. Installation does not require bumper removal! Pre-pressed brass fittings on the rear pods allow for installation of our rear winglets (sold separately) to allow for further customisation to individual taste.The MK8 Golf R body kit range shares the same durability and technology as our renowned WRX, Golf GTI and Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Rear winglets sold seperately
KIT INCLUDES:
MK8 Golf R Rear Spats (pair)
2 Flow Designs stickers
Fitting kit with black stainless hardware
MATERIAL & FINISH:
10mm thick polyethylene composite, bevelled edges
Hand polished satin black$132.00
SAFE & SECURE SHOPPING
