Vehicles - IROAD - New South Performance - H&R Springs - Integrated Engineering - Supernova - SuperPro - T-carbon - Flow Designs
Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.
LEADING INTAKE FEATURES
- Increased airflow - Get the most out of your upgrades
- High-flow velocity stack - True performance design
- Sealed heatshield - Separates cold air from engine bay heat
- Perfect fitment - No modifications required to bolt-on
- Amazing sound - Releases awesome turbo and engine noise
- Looks great - Black powder coat, tight clearances, clean angles
AUDI B8 A4 & A5 COLD AIR INTAKE
You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.
EASY INSTALLATION
Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.
VEHICLE FITMENT
- Audi - A4 2009-2015 (B8-B8.5) 2.0T
- Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
- Audi - A5 2009-2015 (B8-B8.5) 2.0T
UNIQUELY ENGINEERED
This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.
EASY POWER
The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.
DESIGN FEATURES
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.
Front Lowering: 35mm
Rear Lowering: 35mm
Front Axle Weight: Up to 1100kg
Rear Axle Weight: Up to 1090kg
Sporty looks and performance
Progressive spring characteristics
Less weight by using high tension steel
TUV approved
Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!
PRODUCT DETAILS
IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.
MACHINED DESIGN
Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.
FOR USE WITH CUSTOM CATCH CAN SETUPS ONLY
This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.
PRODUCT FEATURES
- Replaces factory plastic valve cover
- Uses factory valve cover gasket
- In-house CNC machined from aluminum
- Includes o ring sealed matching billet oil cap
- -10AN breather outlet for catch can setups
ADDITIONAL PARTS REQUIRED
EVAP CROSSOVER TUBE RELOCATION KIT
The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11
CATCH CAN KIT FOR BILLET VALVE COVER
The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3
VEHICLE FITMENT
- Audi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines
- Audi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines
- Audi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines
- Audi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*
- Audi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines
- Audi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*
- Audi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines
- VW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*
- VW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines
- VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*
- VW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*
- VW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*
*This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.
Sale
No Coding, Direct Install
Get a unique sweeping / dynamic / sequential LED appearance by simply upgrading the LED module on your VW Scirocco with our dynamic variant.
Made specifically for the VW Scirocco, incorporating the same socket as OEM for easy install, no further coding or modification needed.
- Plug N Play – no coding needed
- Easy 10 min install
- No coding needed
- All Tools Included
FITS
- VW Scirocco
- Does not fit VW Golf Mk6 or VW Golf MK5 models 2003-2008 R32/GTI/GT/TSI/TDI
Regular Price:
$119.00
Special Price
$109.00
DETAILS:
The Flow Designs splitter set for the Audi RS3 8V Sedan FL includes front/side splitters, rear spats & flow lock rear diffuser. Adding all bolt on accessories or our optional extras (Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount) will be the perfect addition to your RS3 Sedan, as Flow Designs splitters offer perfect fitment, easy installation every time.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
- RS3 8V Sedan FL Front Lip Splitter & Mounting Brace
- RS3 8V Sedan FL Side Skirt Splitters (Pair)
- RS3 8V Sedan FL Rear Spats (Pair)
- RS3 8V Sedan FL Flow-Lock Rear Diffuser
- WITH all accessories package: RS3 8V Sedan FL Front Lip Splitter Extensions (Pair)
- WITH all accessories package: RS3 8V Sedan FL Front Lip Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Side Skirt Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Rear Spat Winglets (Pair)
- ADD: Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount if desired.
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH:
- Front lip splitter, side skirt splitters, rear diffuser, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
- Rear diffuser fins, Window Vents and accessories: scratch-resistant textured ABS plastic
- Fire Extinguisher Bracket: 3mm Stainless Steel, Powder-coated Texture Black
DETAILS
Complete the aggressive aesthetic of your RS3 8V Sedan FL with our front lip splitter, renowned for their durability under all driving conditions. The RS3 Sedan FL front lip splitter includes a stainless steel mounting brace to boost the overall strength - giving you confidence in a reliable install for both the splitter and your OEM bumper.
Further customise your front lip splitter with our accessories range, which includes adjustable front extensions and front winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter, the adjustable options allows your to match the width to the wheels of your RS3.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Front extensions and front winglets sold separately.
KIT INCLUDES:
- RS3 8V Sedan FL Front Lip Splitter
- RS3 8V Sedan FL Stainless Steel Mounting Brace
- 2 Flow Designs Stickers
- Fitting kit
MATERIAL & FINISH
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
DETAILS
Our adjustable front lip splitters extensions will bolt directly onto our RS3 8V Sedan FL front lip splitters thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
Front Lip Splitter and front winglets sold separately.
KIT INCLUDES:
- RS3 8V Sedan FL Front Lip Splitter Extensions (Pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH:
- 4.5mm thick ABS plastic
- Scratch resistant textured ABS plastic
DETAILS
Our adjustable rear spat winglets will bolt directly onto our RS3 8V Sedan FL rear spats thanks to the pre-pressed in threaded brass fittings on our rear spats. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
Rear Spats are sold separately.
KIT INCLUDES:
- RS3 8V Sedan FL Rear Spat Winglets (Pair)
- 2 Flow Designs stickers
- Fitting Kit
MATERIAL & FINISH:
- 4.5mm thick ABS plastic
- Scratch resistant textured ABS plastic