Vehicles - CTS Turbo - IPE - Turbosmart - Whiteline

CTS Turbo is proud to offer the premier catch can solution for the MK7 Golf R & 8V S3.  The oil catch can is used to prevent oil vapors entering the intake manifold and clogging up the intake valves on direct-injection motors.  Oil deposits on intake manifold and valves reduce performance and cause bad fuel mileage.  Keep your engine clean, running smoothly, and enjoy the peace of mind that comes with knowing that the PCV system on your car is now free of issues.

DESCRIPTION

We are proud to release the new CTS Turbo Stainless Steel 3″ downpipe with high-flow catalytic converter for the MK6/MK7 Jetta 1.4TSI and MK7 MQB Golf 1.4TSI with EA211 Gen1 and Gen2 engines.

Unfortunately, the factory downpipe that comes as standard equipment in your car was designed for anything but performance.  The factory downpipe severely restricts exhaust flow and therefor has adverse effects on horsepower, especially once your car is “chipped”.  The CTS Turbo downpipe will allow for your exhaust gases to flow smoothly, freeing up the additional ponies that you want, all while look amazing.  Highlights of our downpipe include CNC machined turbine discharge (downpipe) flange, mandrel-bent stainless steel tubing, modular design making installation simple and straight forward, smooth transitions allowing for optimal exhaust gas flow.

Precision fabrication, unparalleled quality and great price point all make the downpipe a must-have for any VW enthusiast that values performance and their pocketbook.

Fitment:

• 2015 – 2021 VW Jetta SE 1.4T TSI EA211
• 2016 – 2021 VW Golf 1.4T TSI (MQB) EA211

NOT COMPATIBLE WITH TWIN-CHARGED or HYBRID ENGINES

Product Details:

• Fitment for multiple models, modular design
• Compatible with factory and aftermarket exhaust
• 200cell metallic race catalytic converter
• T304 Seamless Stainless Steel tubing
• T304 Stainless Steel flanges
• 100% TIG Welded
• T304 Stainless Steel 02 bungs with plugs
• Stainless Steel Clamps
• Great Sound without any drone. Sounds great even with factory exhaust.

Stage 2 software is required to avoid check engine light.

Description

We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

Product Details:

– Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners

Fitment:

• 2015 – current VW Golf (incl Sportwagen and AllTrack)
• 2015 – current VW GTI (incl Rabbit)
• 2015 – current VW Golf R
• 2015 – current Audi A3
• 2015 – current Audi S3
• 2017 – current Audi A4/A5/AllRoad

The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM

• Plug and play compatability
• 400% stronger than the OE Diverter Valve
• Designed to handle boost pressure up to 30PSI
• Ideal for lightly modified vehicles

Kompact VAG V2 Plumb Back has been specifically to suit the 2.0L VAG engine Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new Kompact VAG V2 Plumb Back uses O-Ring sealed piston which, coupled with it's billet aluminium construction give it over 30PSI boost handling capability. Included with each Kompact VAG V2 Plumb Back kit: Model specific valve, Mounting screws and Spring clamps.

• Distinctive vent-to-atmostphre BOV sound
• Suitable for stock or lightly modified vehicles
• Supplied blanking plug gives the option of converting to a full recirculating or full vent-to-atmosphere valve
• Eliminates compressor surge, even in stock applications

CTS Turbo is proud to release our B8 3.0T Supercharger Pulley Upgrade Kit.  

CTS pulley is smaller diameter than stock. It will increase the speed at which the supercharger spins and will increase the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components. 

NOTE: CTS B8 3.0T Supercharger Pulley Upgrade Kit must be used with appropriate "Stage 2" performance software.  
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air fuel ratios, timing, and boost pressure bleed off.  

Most Stage 2+ software tunes are compatible with this kit.

Product Details

• Made in house at CTS Turbo, in Canada
• Precision CNC machined from billet ASI303 stainless steel - best on the market! No other pulley manufacturer uses this steel.
• OEM-spec honing and tolerances
• Replacement supercharger drive belt
• Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
• Nitride coated for long-lasting OEM looking finish