CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).
The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.
This kit features press-on style supercharger pulley. Check on your vehicle before ordering!
NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.
Kit Includes:
1 x CTS Turbo Supercharger Pulley, Press-on, 57.3mm 1 x CTS Turbo Crank Pulley, 187mm 8 x Grade 12.9 bolts 1 x Bando Serpentine Belt (Made in the USA)
IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.
EASY INSTALL BOLT-ON DESIGN NO MODIFICATIONS
ADDS HORSEPOWER UP TO +21HP ON TUNED ENGINES
FLOW OPTIMIZED VELOCITY STACK MOTORSPORT DESIGN
POWER UP
Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.
HIGH-FLOW VELOCITY STACK
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
DESIGN FEATURES
ULTIMATE AIR FLOW
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!
QUALITY COMPONENTS
The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.
EXACT FIT
This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.
Sealed heatshield - Separates cold air from engine bay heat
Perfect fitment - No modifications required to bolt-on
Amazing sound - Releases awesome turbo and engine noise
Looks great - Black powder coat, tight clearances, clean angles
AUDI B8 A4 & A5 COLD AIR INTAKE
You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.
This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.
EASY POWER
The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.
DESIGN FEATURES
INCREASED AIR FLOW
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!
HIGH-FLOW VELOCITY STACK
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
PRECISION FIT
This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
QUALITY COMPONENTS
IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.
The Flow Designs splitter set for the Audi S3 8V Sedan FL includes front/side splitters, rear spats & flow lock rear diffuser. Adding all bolt on accessories or our optional extras (Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount) will be the perfect addition to your S3 Sedan, as Flow Designs splitters offer perfect fitment, easy installation every time.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
S3 8V Sedan FL Front Lip Splitter & Mounting Brace
S3 8V Sedan FL Side Skirt Splitters (Pair)
S3 8V Sedan FL Rear Spats (Pair)
S3 8V Sedan FL Flow-Lock Rear Diffuser
WITH all accessories package: S3 8V Sedan FL Front Lip Splitter Extensions (Pair)
WITH all accessories package: S3 8V Sedan FL Front Lip Splitter Winglets (Pair)
WITH all accessories package: S3 8V Sedan FL Side Skirt Splitter Winglets (Pair)
WITH all accessories package: S3 8V Sedan FL Rear Spat Winglets (Pair)
ADD: Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount if desired.
2 Flow Designs stickers
Fitting kit
MATERIAL & FINISH:
Front lip splitter, side skirt splitters, rear diffuser, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
Complete the aggressive aesthetic of your S3 8V Sedan FL with our front lip splitter, renowned for their durability under all driving conditions. The S3 Sedan FL front lip splitter includes a mounting brace to boost the overall strength - giving you confidence in a reliable install for both the splitter and your OEM bumper.
Further customise your front lip splitter with our accessories range, which includes adjustable front extensions and front winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter, the adjustable options allows your to match the width to the wheels of your S3.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Front extensions and front winglets sold separately.
Our adjustable front lip splitters extensions will bolt directly onto our S3 8V Sedan FL front lip splitters thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
Front Lip Splitter and front winglets sold separately.
KIT INCLUDES:
S3 8V Sedan FL Front Lip Splitter Extensions (Pair) 2 Flow Designs stickers Fitting kit
Complete the aggressive aesthetic of your S3 8V Sedan FL rear with our rear spats - known for their durability and strength. Pre-pressed brass fittings on the rear spats allow for installation of our rear winglets to allow for further customisation to suit your individual taste.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
The Audi S3 8V Flow-Lock Rear Diffuser makes extensive use of our Flow-Lock technology- a design system that utilises precision engineering and cutting techniques to create an integral mechanical bond. What this means for you is a durable, stylish and integrated rear setup with no visible fasteners. The perfect view for everyone behind you.
Our S3 8V Flow-Lock Diffuser paired with rear spats and winglets work together to complete the enhanced aggression our splitter kits bring to your S3 8V Sedan. Our rear diffuser and spat kits can be fitted without removing the rear bumper from your vehicle.
Valance is installed to the car through bolts and nuts while the Flow-Lock diffuser fins simply click into the valance (once locked into the valance it is secure). It is also possible to install when your car is on the ground.
KIT INCLUDES:
S3 8V Sedan FL Flow-Lock Rear Diffuser
2 Flow Designs Stickers
Fitting kit
MATERIAL & FINISH:
10mm thick polyethylene composite rear valance with bevelled edges
4.5mm thick Scratch resistant textured ABS Flow-Lock Diffuser Fins