Vehicles - Turbosmart - New South Performance - H&R Springs - Supernova - XFORCE - T-carbon - P3 Cars - Flow Designs - Whiteline
Sale
P3 OBD2 Multi-Gauge
- Plug and Play install - just plug into your obd2 port and install into dash!
- Reads and clears OBD2 Codes
- OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
- Peak Recall on all functions
- Boost and Vacuum from OBD2 port
- Optional 80psi analog boost sensor
- Optional Auto-Dim or Manual Dimmer
- 2 x universal 0-5v linear analog inputs
- Includes digital display, custom OBD2 wire harness and control box.
Optional 80psi boost sensor
- Allows gauge to read boost directly from intake/charge pipe
- Plugs directly into the OBD2 harness (no wiring required)
- Can be added/removed from the gauge at any time
Tubing kit
- Approximately 60" of 5/32" O.D. flexible plastic tubing
- 5/32" O.D. "T" fitting
- 3 sections of 5/32" I.D. vacuum hose
OEM vent option not available - Fits both left hand drive and right hand drive vehicles
P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more.
Regular Price:
$605.00
Special Price
$545.00
Sale
- Australian owned
- 100% Fitment Guarantee
- Genuine quality brands
Regular Price:
$229.00
Special Price
$146.70
Sale
Compatible with all Mk1 Q5 Models (8R)
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
- OEM Integration - installs in your vent for a sleek install while retaining air flow
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
OEM Vent Option
- We install the display in an OEM vent to make your install even easier
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Need more details?
Check out the V3 install page for configuration and installation info.
Regular Price:
$594.00
Special Price
$535.00
Front Lowering: 35mm
Rear Lowering: 35mm
Front Axle Weight: Up to 1100kg
Rear Axle Weight: Up to 1090kg
Sporty looks and performance
Progressive spring characteristics
Less weight by using high tension steel
TUV approved
Sale
No Coding, Direct Install
Get a unique sweeping / dynamic / sequential LED appearance by simply upgrading the LED module on your VW Scirocco with our dynamic variant.
Made specifically for the VW Scirocco, incorporating the same socket as OEM for easy install, no further coding or modification needed.
- Plug N Play – no coding needed
- Easy 10 min install
- No coding needed
- All Tools Included
FITS
- VW Scirocco
- Does not fit VW Golf Mk6 or VW Golf MK5 models 2003-2008 R32/GTI/GT/TSI/TDI
Regular Price:
$119.00
Special Price
$109.00
- Plug and play compatability
- 400% stronger than the OE Diverter Valve
- Designed to handle boost pressure up to 30PSI
- Ideal for lightly modified vehicles
The Turbosmart Kompact EM Series combines world leading electronics and more than two decades of blow off valve technology for rapid response and unbeatable performance. The Turbosmart EM Series is a plug and play upgrade for OE electronic diverter valves that are prone to cracking under pressure. Featuring a patent-pending pressure control, the Turbosmart Kompact EM Series are faster than the OE unit and will not leak under pressure.
Features:
- Plumb Back
- Patent pending integrated pressure control
- Plug and play compatability
- Integrated proprietary high-temperature solenoid valve
- 400% stronger than the OE unit
DETAILS:
The Flow Designs splitter set for the Audi RS3 8V Sedan FL includes front/side splitters, rear spats & flow lock rear diffuser. Adding all bolt on accessories or our optional extras (Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount) will be the perfect addition to your RS3 Sedan, as Flow Designs splitters offer perfect fitment, easy installation every time.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
- RS3 8V Sedan FL Front Lip Splitter & Mounting Brace
- RS3 8V Sedan FL Side Skirt Splitters (Pair)
- RS3 8V Sedan FL Rear Spats (Pair)
- RS3 8V Sedan FL Flow-Lock Rear Diffuser
- WITH all accessories package: RS3 8V Sedan FL Front Lip Splitter Extensions (Pair)
- WITH all accessories package: RS3 8V Sedan FL Front Lip Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Side Skirt Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Rear Spat Winglets (Pair)
- ADD: Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount if desired.
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH:
- Front lip splitter, side skirt splitters, rear diffuser, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
- Rear diffuser fins, Window Vents and accessories: scratch-resistant textured ABS plastic
- Fire Extinguisher Bracket: 3mm Stainless Steel, Powder-coated Texture Black
DETAILS
Complete the aggressive aesthetic of your RS3 8V Sedan FL with our front lip splitter, renowned for their durability under all driving conditions. The RS3 Sedan FL front lip splitter includes a stainless steel mounting brace to boost the overall strength - giving you confidence in a reliable install for both the splitter and your OEM bumper.
Further customise your front lip splitter with our accessories range, which includes adjustable front extensions and front winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter, the adjustable options allows your to match the width to the wheels of your RS3.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Front extensions and front winglets sold separately.
KIT INCLUDES:
- RS3 8V Sedan FL Front Lip Splitter
- RS3 8V Sedan FL Stainless Steel Mounting Brace
- 2 Flow Designs Stickers
- Fitting kit
MATERIAL & FINISH
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
DETAILS
Our adjustable front lip splitters extensions will bolt directly onto our RS3 8V Sedan FL front lip splitters thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
Front Lip Splitter and front winglets sold separately.
KIT INCLUDES:
- RS3 8V Sedan FL Front Lip Splitter Extensions (Pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH:
- 4.5mm thick ABS plastic
- Scratch resistant textured ABS plastic
DETAILS
Our adjustable rear spat winglets will bolt directly onto our RS3 8V Sedan FL rear spats thanks to the pre-pressed in threaded brass fittings on our rear spats. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
Rear Spats are sold separately.
KIT INCLUDES:
- RS3 8V Sedan FL Rear Spat Winglets (Pair)
- 2 Flow Designs stickers
- Fitting Kit
MATERIAL & FINISH:
- 4.5mm thick ABS plastic
- Scratch resistant textured ABS plastic