Transform the driving experience of your Toyota GR Yaris with our ALL-NEW VAREX Valve equipped exhaust system; engineered to take your GR to the next level. through our extensive development and testing process we’ve been able to strike the perfect balance between sound and performance.Creating something very special for the giant killing Yaris GR. The system uses our cutting-edge patented VAREX Valve technology, allowing you to switch from Street to Race mode using the remote control or optional SmartBox system which offers smartphone app control and delivers unrivalled customisation.
3″ cat back system in brushed 304 stainless steel
Two Centre hot dog resonators with anti-resonance chamber
3" XFORCE Titanium cat back system with Burnt Blue Tips to suit Toyota Yaris GR
Features
TITANIUM IS HERE!
Transform the driving experience of your Toyota GR Yaris with our ALL-NEW TITANIUM Cat Back Exhaust System, engineered to take your GR to the next level.
The Titanium Toyota Yaris GR Cat-back system offers improved performance, amazing sound quality, and impressive weight savings of 4.5 kg below the OEM Toyota GR system. Both plain polished finish and burnt blue tip options are available.
These systems are limited in stock, so please contact us today to secure yours.
3″ Cat Back manufactured in 100% Titanium
Centre hotdog resonator with anti-resonance chamber
Dual Rear Muffler with Twin 2.5″ outlets
Polished Burnt Blue 4″ Angle Cut Tips
4.5 kg weight saving over OEM Toyota GR system
Fits to factory centre joint or bottom of downpipe to give you flexibility in choice
This recirculating catch can kit has been designed for use with the IE billet valve cover (IE part number: IEBAVC5) as a simple install solution for your billet valve cover and catch can. IE billet valve cover sold separately.
Product Features
• Easy install catch can and valve cover kit
• Complete kit, ready to install
• Installs with IE billet valve cover (sold separately)
• All components are black for a sleek stealth install
Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!
PRODUCT DETAILS
IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.
MACHINED DESIGN
Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.
FOR USE WITH CUSTOM CATCH CAN SETUPS ONLY
This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.
PRODUCT FEATURES
Replaces factory plastic valve cover
Uses factory valve cover gasket
In-house CNC machined from aluminum
Includes o ring sealed matching billet oil cap
-10AN breather outlet for catch can setups
ADDITIONAL PARTS REQUIRED
EVAP CROSSOVER TUBE RELOCATION KIT
The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11
CATCH CAN KIT FOR BILLET VALVE COVER
The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3
VEHICLE FITMENT
Audi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines
Audi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines
Audi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines
VW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*
*This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software. Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Made in house at CTS Turbo in Canada
Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
OEM-spec honing and tolerances
Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
Nitride coated for long-lasting OEM looking finish
Includes belt and bolts required for install
Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software. Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Made in house at CTS Turbo in Canada
Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
OEM-spec honing and tolerances
Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
Nitride coated for long-lasting OEM looking finish
Includes belt and bolts required for install
Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
Bronze inner bushing to provide smooth pivoting without wear
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
VW - Golf R 2012-2012 (MK6) 6 speed transmisison
VW - GTI 2009 (MK5) 6 speed transmisison
VW - GTI 2010-2014 (MK6) 6 speed transmisison
VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
VW - Jetta 2008-2009 (MK5) 5 speed transmisison
VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison
The CTS Turbo Golf R / FSI intake heat shield is designed to mount simply to the factory mounting points. With a brushed aluminium finish this heat shield not only reduces your intake temps, but dresses up the engine bay like no other
IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.
EASY INSTALL BOLT-ON DESIGN NO MODIFICATIONS
ADDS HORSEPOWER UP TO +21HP ON TUNED ENGINES
FLOW OPTIMIZED VELOCITY STACK MOTORSPORT DESIGN
POWER UP
Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.
HIGH-FLOW VELOCITY STACK
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
DESIGN FEATURES
ULTIMATE AIR FLOW
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!
QUALITY COMPONENTS
The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.
EXACT FIT
This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.