Vehicles - Forge Motorsports - Turbosmart - Integrated Engineering - Eibach - Flow Designs - Ingo Noak - Autotech
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
Sale
IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.
EASY INSTALL
BOLT-ON DESIGN
NO MODIFICATIONS
ADDS HORSEPOWER
UP TO +21HP
ON TUNED ENGINES
FLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGN
Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!
The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.
This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
Regular Price:
$702.00
Special Price
$689.00
PRODUCT FEATURES
- Eliminates excessive play from OE rubber bushings
- Greatly Reduces chances of missed shifts
- CNC machined in-house for precise fitment
- Bronze inner bushing to provide smooth pivoting without wear
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
- VW - Golf R 2012-2012 (MK6) 6 speed transmisison
- VW - GTI 2009 (MK5) 6 speed transmisison
- VW - GTI 2010-2014 (MK6) 6 speed transmisison
- VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
- VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
- VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison
Sale
Eibach PRO-KIT Performance Springs
World‘s leading Performance Suspension Spring System
Regular Price:
$548.00
Special Price
$493.00
Sale
Eibach Sportline
Sport Performance Springs
- Pure Sport Suspension Springs and Appearance
- Lower ride height - up to 50mm
- Optimal attraction through lowering
- Motorsport-like handling
- Progressive suspension characteristics
- Engineered and tested to work perfectly with stock dampers
- Anti-Roll-Kit to control body roll
- Bilstein sport dampers to upgrade to our B12 Pro-Kit
Technical Data:
Manufacturer:: |
Eibach |
Drop front: |
45mm |
Drop rear: |
35-40mm |
Front axle load: |
Kg |
Rear axle load: |
1150Kg |
Regular Price:
$581.00
Special Price
$523.00
Sale
Eibach Sportline Sport Performance Springs
Pure Sport Suspension Springs and Appearance
Regular Price:
$493.00
Special Price
$444.00
Sale
Eibach Sportline Sport Performance Springs
Pure Sport Suspension Springs and Appearance
Regular Price:
$581.00
Special Price
$519.00
Sale
Eibach Sportline
Sport Performance Springs
- Pure Sport Suspension Springs and Appearance
- Lower ride height - up to 50mm
- Optimal attraction through lowering
- Motorsport-like handling
- Progressive suspension characteristics
- Engineered and tested to work perfectly with stock dampers
- Anti-Roll-Kit to control body roll
- Bilstein sport dampers to upgrade to our B12 Pro-Kit
Technical Data:
Manufacturer:: |
Eibach |
Drop front: |
45mm |
Drop rear: |
35-40mm |
Front axle load: |
Kg |
Rear axle load: |
1150Kg |
Regular Price:
$644.00
Special Price
$580.00
Sale
Eibach PRO-KIT Performance Springs
World‘s leading Performance Suspension Spring System
Regular Price:
$633.00
Special Price
$570.00
Sale
VW Polo 6R Gti Front Splitter
Kit Includes
Splitter
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Regular Price:
$359.00
Special Price
$299.00