Vehicles - Forge Motorsports - New South Performance - XFORCE - SuperPro - P3 Cars
Sale
.
XFORCE FOR VOLKSWAGEN GOLF GTI MK6 & SCIROCCO R! AVAILABLE NOW.
Regular Price:
$1,300.00
Special Price
$1,145.00
Sale
.
XFORCE TURBO BACK EXHAUST FOR VOLKSWAGEN GOLF GTI MK6! AVAILABLE NOW.
Regular Price:
$2,195.00
Special Price
$1,935.00
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
*Available for both pre and post facelift vehicles*
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
- Ball for low friction and long life
- Elminate sway bar flex for consistent handling
- Spanner provision for on-car adjustment
- Suitable for application on lowered or raised vehicles
Features and Benefits:
- 6060-T5 Alloy Link Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
- SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
Sale
Description
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reduced to 3″
- Flex bellows before hanger
- 100 cell high flow performance catalytic converter
- Designed to fit to factory cat back systems
- Requires ECU tuning
Fits the following;
- Audi 8P S3
- Audi 8P A3 2.0T
- Golf MK6 R
Part No: |
ES-VW07-KITB |
Vehicle Model: |
A3, GOLF R, S3 |
Diameter [in]: |
3 |
Material: |
Stainless Steel |
Regular Price:
$1,000.00
Special Price
$880.00
Sale
Part No:
ESKC19VKCS
RRP:
$1,350.00
Diameter [in]:
3"
Material:
Stainless Steel
Suppliers Product Group:
Cat Back System
Feature;
3″ Stainless steel pipe work
Varex rear Muffler
Cat Back system
3.5″ double wall tips
Factory secondary cat converter is deleted
Smartbox is NOT included
Installation instructions
Download Installation Instructions
Regular Price:
$1,599.00
Special Price
$1,409.00
Sale
Description
Polished Stainless Steel Cat-Back System With Twin 2.5″ Piping Varex Rear Mufflers
Features
- Twin 2.5″ Cat-Back system;
- Twin Hot-Dog style center resonators;
- Slip joint design centre section
- Polished stainless 304 grade
- Varex rear mufflers
Part No: |
ES-KS17-VMKCBS |
Vehicle Model: |
STINGER GT |
Diameter [in]: |
2.5 |
Material: |
Stainless Steel |
Regular Price:
$2,250.00
Special Price
$1,980.00
Sale
Resonator delete pipe in factory standard sizing
Features
- Resonator delete pipe
- Clamp & GASKETS included
- 2.5″ size
- Only suits factory standard rear muffler
Part No: |
ESHY31RDP |
Vehicle Model: |
CERATO, i30 |
Diameter [in]: |
2.5" |
Material: |
304 Stainless Steel
|
Regular Price:
$385.00
Special Price
$338.00
Description
Non-Polished Stainless Steel 4″ Dump & Cat Kit
Features
- 2.5″ dump pipe
- 200 cell high flow race cat
- Euro style mesh flex bellows
- Non polished stainless steel
- Will bolt to factory standard cat back system
- Tune is recommended after fitment
Part No: |
E2G4FJKITB |
Vehicle Model: |
CERATO, i30 |
Diameter [in]: |
2.5" |
Material: |
Stainless |
Sale
Description
Varex Dual 3" Cat Back System
Features
Let your twin-turbo S58 sing with our VAREX Valve equipped exhaust system to suit the BMW G80 M3 and G82 M4 Engineered with 3” 304 stainless steel with quad 4” tip outlets, this system projects a symphony like no other. Not only will your M sound the best, it will look the part as well. Designed for the spirited driver seeking a performance exhaust solution with user-adjustable sound control, our system for the G80 M3 completely transforms your behind-the-wheel experience.
- Dual 3” VAREX Cat Back System.
- Mandrel Bent 304 Stainless Steel Brushed Finish.
- Dual 2.75″ OEM Inlet to Dual 3″ Pipework with V-Band Flanged Clamping System for ease of installation and future serviceability.
- Single East-West Dual 3″ Inlet VAREX™ Muffler with Dual VAREX™ valves.
- Quad 3″ Outlet with Polished Double Wall Angle 4″ Tips with bolt on installation
Regular Price:
$4,749.00
Special Price
$4,179.00