Designed and produced by our Sydney associated workshop primarily for Australian delivered vehicles.
The harness will come with how to guides, videos and coding instructions.
Coding will be required through any recognised program VCDS or OBD11.
If your vehicle has any coding done that affects the tail lights or any other physical modification to the tail lights wiring this harness will not work. This harness requires the car to be 100% stock with the tail lights. If in doubt please send us an email.
Regular Price: $275.00
Special Price $255.00
We are pleased to present the cold air intake system for 'RoW' Market MK7 Golf 1.4TSI with EA211 engine.
The CTS intake system is constructed from T6061 aircraft grade aluminum and offers superior heat disipation, improved airflow and cooler intake temperatures.
The CTS air box connects seamlessly to the factory air inlet drawing cool air from outside of the engine bay, while deflecting radiant heat from the engine bay.
Improving airflow and reducing intake temperatures increases power, and fuel economy, while reducing spool up time. The turbo and the diverter valve sounds become a lot more noticeable and make the car more fun to drive!
HP gain: 9-10hp
Note: will not fit the twin-charged 1.4TSI from the MK6, for this please see CTS-IT-880.
This is a CTS Turbo universal 3″ low profile cone filter, it has a tapered design to fit in tight spots. These filters are used in our MK4 1.8T, 2.0T FSI, 2.oT TSI, B8 A4 intake kits. Also these filters can also be used in a custom big turbo application.
3.0″ Inlet x 8.0″ Long x 5.0″ Wide
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
This is a replacement air filter for CTS Turbo Intake - CTS Turbo 8V.2 RS3 FL / 8S TTRS EVO Intake (2018+)
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
Fitment:
CTS Turbo is proud to release our high flow Turbo Muffler delete for the Non-MQB Gen3 EA888.3 1.8TSI and 2.0TSI engines with the stock turbo.
The CTS Turbo Muffler delete is a one-piece design CNC constructed from T6 6061 aircraft-grade aluminum and hard anodized to reduce wear.
Our Turbo Muffler delete replaces the restrictive, power-robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise. By removing the restriction you gain 6-7HP and improve the throttle response!
Our kit installs in 30 minutes with hand tools, fits perfectly and looks great.
For those of you that want optimal power and boost response, the CTS Turbo Gen3 TSI Turbo Muffler Delete is your answer.
NOTE: compatible only with factory Garrett/Honeywell MGT1752S turbo on EA888.3 TSI (turbocharger OE part number 06K145874)
Compatible with factory and CTS Turbo outlet pipes.
NOT FOR MQB VEHICLES!
Fitment:
CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.
These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.
There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.
Generation
Make | Model | Year | Generation |
---|---|---|---|
MERCEDEZ-BENZ | AMG GT 63 | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | AMG GT 63S | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | E63 | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | E63S | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | G63 | 2019 - 2020 | W463 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | C217 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | W222 |
Mounting on top of the steering column, the WRX/STI ColumnPod™ is designed to hold a 2” or 2 1/16” (52mm) gauge on your Impreza WRX/STI (2008-2014) or Forester (2009-2013)
The unique design offsets the gauge to the left for maximum visibility of the dash instrumentation.
Molded from ABS and matched in color and gloss, the ColumnPod™ looks like an OEM installation. It holds the gauge at an angle that minimizes distractions and helps keep your eyes on the road.
Our exclusive design hides all wires and tubes from view.
Regular Price: $94.00
Special Price $59.00
OEM Drive Mode Factory Control 3 pin PWM to VAREX Smartbox.
Are you looking to add a little more control and customization to your Varex equipped exhaust system? Look no further! We are excited to announce the release of our Drive Mode feature for our Varex Smartbox controller unit.
This feature will allow you to control your Varex equipped exhaust system from the OEM Drive Mode vehicle controls, making it easier and more convenient than ever before.
3" 304 Stainless Steel Cat Back Exhaust System With Varex
Give your VW Golf MK8 R the ultimate soundtrack with the XFORCE cat back exhaust system, complete with VAREX valve control.
Constructed of 304-grade stainless steel, the XFORCE high-flow 3” bore system and race-style rear muffler helps reduce exhaust gas pressure for enhanced performance, whilst the integrated VAREX exhaust valve gives you control over your exhaust volume, all from the touch of a button!
Not only do you get an exhaust system that lets you adjust how you your exhaust sounds, you also get enhanced looks too thanks to the brushed finish, precision TIG welds and a choice of 4” quad exhaust tailpipe trims.
Regular Price: $2,299.00
Special Price $2,025.00
Please note you are receiving a special price when you purchase the VW MK8 Golf GTI complete body kit splitter set.
Get the original and best MK8 Golf GTI splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being one of the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are.
The MK8 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK8 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!