Transform the driving experience of your Toyota GR Yaris with our ALL-NEW VAREX Valve equipped exhaust system; engineered to take your GR to the next level. through our extensive development and testing process we’ve been able to strike the perfect balance between sound and performance.Creating something very special for the giant killing Yaris GR. The system uses our cutting-edge patented VAREX Valve technology, allowing you to switch from Street to Race mode using the remote control or optional SmartBox system which offers smartphone app control and delivers unrivalled customisation.
3″ cat back system in brushed 304 stainless steel
Two Centre hot dog resonators with anti-resonance chamber
3" XFORCE Titanium cat back system with Burnt Blue Tips to suit Toyota Yaris GR
Features
TITANIUM IS HERE!
Transform the driving experience of your Toyota GR Yaris with our ALL-NEW TITANIUM Cat Back Exhaust System, engineered to take your GR to the next level.
The Titanium Toyota Yaris GR Cat-back system offers improved performance, amazing sound quality, and impressive weight savings of 4.5 kg below the OEM Toyota GR system. Both plain polished finish and burnt blue tip options are available.
These systems are limited in stock, so please contact us today to secure yours.
3″ Cat Back manufactured in 100% Titanium
Centre hotdog resonator with anti-resonance chamber
Dual Rear Muffler with Twin 2.5″ outlets
Polished Burnt Blue 4″ Angle Cut Tips
4.5 kg weight saving over OEM Toyota GR system
Fits to factory centre joint or bottom of downpipe to give you flexibility in choice
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software. Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Made in house at CTS Turbo in Canada
Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
OEM-spec honing and tolerances
Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
Nitride coated for long-lasting OEM looking finish
Includes belt and bolts required for install
Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.
Installation is very straight forward and only required basic hand tools:
Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil. Product Details:
Made in Canada from billet T6061 Aluminum
Hard anodized black for stealth and longevity (machined finish shown)
Uses OEM O-ring
Installation of CTS-HW-0242 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
Compatible with OEM Filter
The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.
This part replaces the OE part# 06D 115 408B and 07K 115 408.
Fitment:
MK6 Golf R, MK5 GTI (FSI), 8P Audi A3 (FSI), MK2 Audi TT-S (FSI)
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
3.5″ dump pipe reduced to 3″
Flex bellows before hanger
100 cell high flow performance catalytic converter
Part No:
ESKC19VKCS
RRP:
$1,350.00
Diameter [in]:
3"
Material:
Stainless Steel
Suppliers Product Group:
Cat Back System
Feature;
3″ Stainless steel pipe work
Varex rear Muffler
Cat Back system
3.5″ double wall tips
Factory secondary cat converter is deleted
Smartbox is NOT included
Installation instructions
Download Installation Instructions