This will replace OEM part numbers 06H 145 710D, 06F 145 710G, & 06H 145 710 C
Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CJXB, CZPA, and CJXC;US codes CPLA and CPPA) including Golf MK7 R
This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp!
This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
In The Box:
1 x FMDVMK7R Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
· Stainless Steel Rivets
· Stainless Steel Fasteners
· Carbon fabric Outer Shell
· Calcium Magnesium Silicate Wool constructed Inner Core
· High temperature silica fabric
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C
· Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C
· Radiant Heat Limit: 2500°F/1371°C
Complimentary Products
THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES
The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.
⭐ Excellent quality product & easy to fit ⭐
The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.
The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
As with all Forge products, this hose comes with a lifetime warranty*
Regular Price: $375.00
Special Price $349.00
FMKT024 – Audi RS3 (8V chassis), and Audi TTRS (8S)
A set of four boost hoses and air box coupler hose for the Audi RS3 and Audi TTRS - Please note the airbox hose (centre of the kit image) does not fit the DNWA and DAZA engine codes. This hose kit includes the intercooler inlet and outlet hoses (two largest hoses seen in the kit image), throttle body hose located at feed into alloy inlet manifold elbow (straight reducer seen in the kit image), and turbo outlet hose (two smallest hoses in the kit image, one being an alternative for the facelift 8V models).
The Forge silicone hoses in this kit are Fluorosilicone lined to prevent oil vapour penetration throughout the inner hose wall. Fluorosilicone lining also renders the kit suitable to be used with either modern long-life coolants or Organic Acid Technology coolants (O.A.T.).
The use of a Fluorosilicone lining ensures that Forge silicone hoses are the clear market leader.
This durable Forge Motorsport silicone hose kit has been designed to withstand pressures experienced in both tuned and remapped Audi RS3 and TTRS engines, long outlasting the original hoses. This high quality hose kit is covered by the limited lifetime Forge Motorsport warranty, keeping you on the road and ahead of the pack!
This set of hoses is available in red, blue or black finish, an added aesthetic option for this high quality hose kit.
*T&C's Apply
Description:
LEYO Oil Catch Can Kit Plus with the new washer bottle delete integrated onto our MK7 oil catch can, owners of MK7 R and Audi S3 8V can now protect your engine with LEYO Oil Catch Can Kit Plus.
Our new washer bottle delete frees up the space taken by the top part of the washer bottle so that you have space for our Oil Catch Can. The aluminum washer bottle delete beautifully replaces the top section of the washer bottle while not disrupting the functionality of your washer.
Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.
Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can had also included pre-installed drain valve, protecting your pride and joy has never been easier.
Specifications:
Installs under factory engine cover.
Uniquely designed filtration system.
Pre-installed drain valve for easy draining.
For more efficient and cooler air flow, be sure to compliment your ride with Leyo Motorsport’s Turbo Charge Pipes.
Our in-house designed full aluminium tubing allows a less restricted path between your intercooler and turbocharger housing. When performing real time testing, our research and developers found the OEM unit was not efficient in keeping intake air traveling smoothly all the way to the Manifold. This is where Leyo Motorsport turbo charge pipes comes in. We use a heavy duty silicon hose and clamp to maintain optimal high boost flow for stage 1 to stage 3 setups in your performance vehicle with extra WMI Bung. The Leyo Motorsport turbo charge piping is larger than the OEM unit allowing for smoother performance when tuning on a dyno.
Don’t let airflow be restricted, order your unique Leyo Motorsport turbo charge pipe kit today.
Specifications:
Improved air flow from the turbo all the way through.
Removes OEM restrictions.
Pipes made from heavy duty aluminum.
Connectors made from heavy duty silicon.
Perfect for Stock & Stage 1 through to 3 performance.
2 WMI Bung.
10mm larger than OEM.
For MQB 7 speed DQ381 and 6 speed DQ250 DSG gear box.
Stock Intercooler 60mm I.D.
Aftermarket uprated intercooler core with stock diameter connector 60mm I.D.
Description:
Introducing the refreshed Leyo intake system for 8V RS3 (pre-facelift) now with a massive 4” intake pipe! For those of you shopping for a new intake, on the 8V RS3, bigger IS better. Those that says the opposite have factory intake on their cars and you listening to them?
The 8V RS3 with its gorgeous 2.5l engine is one of the most tuned cars on the market. Unleash its full potential, feed more air into it as it has been begging you to. Our new 4” piping is a tuner’s dream come true.
*This product is only for use on the race track.
*This intake does not fit the 2017+ aluminum block 8V RS3.
Specifications:
OEM fitment requires no fabrication.
Unique quality and design.
4’inch diameter for greater air induction.
Track and dyno proven for greater horsepower gain.
Increased induction sound.
Heat shield included.
Direct bolt on & easy installation.
Easy installation.
Intake Heat shield.
COMPATIBLE VEHICLES
For 2015-2017 Audi RS3 8V, does not fit the 2017+ RS3 facelift (8V.2).
Year |
Model
|
Type
|
Engine
|
2015-2017
|
RS3
|
8V
|
2.5 TFSI
|
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE | PORTS | OS | PROC. | POWER | RAM |
Laptop or Tablet |
Wifi & USB |
Windows 10 or newer |
32 or 64 bit |
1.0ghz or greater |
4GB or greater |
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.
Regular Price: $929.00
Special Price $836.00
This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.
Kit includes:
This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.
TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!