Stop missing shifts and your friends will stop laughing at you.
Eliminate free-play and slop in your factory shifter bracket by replacing soft factory rubber bushings.
Keep your shifts crisp and smooth; and stay ahead of the pack!
Kit includes:
3 x shifter bracket bushings (upper and lower halfs)
This part fits the following transmissions:
MK3: 02A ONLY
MK4: 02J, 02M
MK5: 02Q
MK6: 02Q
MK7: 6MT
CTS Turbo is proud to release our B8 3.0T Supercharger Pulley Upgrade Kit.
CTS pulley is smaller diameter than stock. It will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS B8 3.0T Supercharger Pulley Upgrade Kit must be used with appropriate "Stage 2" performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Product Details:
PLEASE NOTE: This product does not include the silicone as per the image. It is expected that you use the silicone that came included with your K04 Upgrade Kit.
Regular Price: $379.00
Special Price $329.00
Audi | TT | MK2 (2008-2015) | 2.0 TSI |
Audi | A3 | 8P (2009-2013) | 2.0 TSI (FWD) |
Volkswagen | Tiguan | (2009-2011) | 2.0 TSI |
Volkswagen | Tiguan | (2012+) | 2.0 TSI |
Volkswagen | Jetta | MK5 (2010) | 2.0 TSI |
Volkswagen | Jetta | MK6 Sedan (2011-2017) | 2.0T GLI |
Volkswagen | Jetta | MK6 Sportwagen (2010-2017) | 1.8TSI/2.0TSI |
Volkswagen
Volkswagen |
Jetta
Golf/GTI/Rabbit |
MK6 Sedan (2014-2017)
MK5 (2009) |
1.8TSI/2.0T GLI
2.0 TSI |
Volkswagen | Golf/GTI/Rabbit | MK6 (2010-2014) | 2.0T |
Volkswagen | CC | (2009+) | 2.0 TSI |
Volkswagen | Beetle | Beetle (2012+) | 2.0 TSI |
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Fitment:
CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.
Installation is very straight forward and only required basic hand tools:
Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil.
Product Details:
The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.
This part replaces the OE part# 06D 115 408B and 07K 115 408.
Fitment: