Vehicles - CTS Turbo - IPE - Turbosmart - New South Performance - Flow Designs - INA - Ingo Noak - Autotech
CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).
The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.
This kit features press-on style supercharger pulley. Check on your vehicle before ordering!
NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.
Kit Includes:
1 x CTS Turbo Supercharger Pulley, Press-on, 57.3mm
1 x CTS Turbo Crank Pulley, 187mm
8 x Grade 12.9 bolts
1 x Bando Serpentine Belt (Made in the USA)
Fitment (check on vehicle):
- S4 B8/B8.5 (2010-2016)
- S5 B8/B8.5 (2010-2016)
- SQ5 B8 (2014+)
- Q5 B8 (2009+)
- A6 C6 (2005.5 – 2011)
- A6 C7 (2012+)
- A7 C7 (2012+)
Sale
Kompact VAG V2 Plumb Back has been specifically to suit the 2.0L VAG engine Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new Kompact VAG V2 Plumb Back uses O-Ring sealed piston which, coupled with it's billet aluminium construction give it over 30PSI boost handling capability. Included with each Kompact VAG V2 Plumb Back kit: Model specific valve, Mounting screws and Spring clamps.
Regular Price:
$320.00
Special Price
$293.21
Sale
- Distinctive vent-to-atmostphre BOV sound
- Suitable for stock or lightly modified vehicles
- Supplied blanking plug gives the option of converting to a full recirculating or full vent-to-atmosphere valve
- Eliminates compressor surge, even in stock applications
These new Kompact Dual Ports offer an alternative to the existing Kompact Plumb Backs for the below cars, for owners who want the sound of a Dual Port BOV, but do not require the heavier-duty performance of the larger and higher priced Type 5.
The Kompact is suited to owners of otherwise stock or mildly modified vehicles, seeking the improved performance of an Turbosmart BOV with that classic vent-to-atmosphere sound.
The existing Kompact Plumb Back for these applications is ideal for those who prefer the quieter operation of a recirculating BOV, while the Type 5 is ideal for more highly modified cars running increased boost levels.
The VAG Type 5 Smart Port Diverter Valve features innovative new drive-by-wire friendly staging technology. This eliminates compressor surge at both low throttle and high engine load while smoothly integrating with factory engine mapping. Plus a new hard-anodised, lightweight, aluminium piston provides better valve response and prolonged piston life.
Regular Price:
$480.00
Special Price
$420.71
Sale
Kompact VAG 2.0T V2 - Dual Port
TS-0203-1041
Details
Applications
Instructions
Accessories
Kompact VAG V2 Dual Port has been specifically to suit the 2.0L VAG engine
Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new Kompact VAG V2 Dual Port uses O-Ring sealed piston which, coupled with it's billet aluminium construction give it over 30PSI boost handling capability.
VAG V2 Dual Port kit:
Model specific valve, Mounting screws and Spring clamps.
Regular Price:
$350.00
Special Price
$322.96
Sale
The Kompact EM series combines world leading electronics and 20 years of blow off valve technology together to provide rapid response.
Regular Price:
$360.00
Special Price
$339.96
Sale
DESCRIPTION
Direct fit upgrade for the factory BOV on Hyundai i30N
Packaged with a blanking plug to switch the unit into pure vent to atmosphere or plumb-back modes
All billet CNC construction and attractive anodized finish
Manufactured, assembled and validated in-house at Turbosmart HQ
A direct fit high performance replacement for the factory all plastic unit, the Turbosmart Kompact BOV suits the Hyundai i30N. The Turbosmart unit is made of billet aerospace grade aluminium with high temperature seals that allows for minimal leakage and a complete seal across the bypass aperture providing as much performance as possible.
Regular Price:
$300.00
Special Price
$276.20
Sale
- Plug and play compatability
- 400% stronger than the OE Diverter Valve
- Designed to handle boost pressure up to 30PSI
- Ideal for lightly modified vehicles
The Turbosmart Kompact EM Series combines world leading electronics and more than two decades of blow off valve technology for rapid response and unbeatable performance. The Turbosmart EM Series is a plug and play upgrade for OE electronic diverter valves that are prone to cracking under pressure. Featuring a patent-pending pressure control, the Turbosmart Kompact EM Series are faster than the OE unit and will not leak under pressure.
Features:
- Plumb Back
- Patent pending integrated pressure control
- Plug and play compatability
- Integrated proprietary high-temperature solenoid valve
- 400% stronger than the OE unit
Regular Price:
$360.00
Special Price
$339.96
Sale
The Mk5/Mk6 ConsolePod™ holds two (2) 2” or 2 1/16” (52mm) gauges and mounts on underside of the center console.
Made with a low-gloss finish, the ConsolePod is uniquely designed to allow you to use the storage compartment 12V power socket and angles the gauges upward towards the driver.
The ConsolePod can be used for both LHD and RHD cars and comes with split loom tubing to cover and protect the gauge wires.
Regular Price:
$75.00
Special Price
$45.00
Sale
VW Polo 6R Gti Front Splitter
Kit Includes
Splitter
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Regular Price:
$359.00
Special Price
$299.00
Package price for this set includes:
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
Please note you are receiving a special price when you purchase the Hyundai i30N Hatch PD complete body kit splitter set.
DETAILS
The i30N PD Hatch body kit splitter set includes front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear pods/spats and our full accessories range of front extensions and winglets all round. Easy installation instructions are included and the i30N range does not require bumper removal. We guarantee our i30N body kit splitter set is the most durable on the market and will complete your exterior aesthetic by giving it a more aggressive look.
The i30N body kit range shares the same durability and technology as our renowned WRX, Golf GTI and R and Focus RS line up which is trusted by car enthusiasts worldwide.
All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES
- i30N front lip splitter & Aerospacers
- i30N front splitter reinforcement brackets (pair)
- i30N side skirt splitters (select one or two pairs)
- i30N Flow-Lock rear diffuser & Aerospacers
- i30N rear lip spats/pods & Aerospacers (pair)
- i30N adjustable front extensions (pair)
- i30N adjustable front winglets (pair)
- i30N adjustable side winglets (pair)
- i30N adjustable rear winglets (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL
- Front lip splitter, side skirt splitters, valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
FINISH
- Hand polished satin black
- Flow-Lock diffuser fins: scratch resistant textured ABS plastic
- CNC engraved logo and features
Regular Price:
$1,505.00
Special Price
$1,430.00