Bronze inner bushing to provide smooth pivoting without wear
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
VW - Golf R 2012-2012 (MK6) 6 speed transmisison
VW - GTI 2009 (MK5) 6 speed transmisison
VW - GTI 2010-2014 (MK6) 6 speed transmisison
VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
VW - Jetta 2008-2009 (MK5) 5 speed transmisison
VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison
The Integrated Engineering MK5/MK6 FDS intercooler system was built from the ground up to offer the ultimate in performance for your vehicle. When increasing the power output of your engine it is extremely important to ensure it has the proper cooling to match. It packs a very large intercooler core into the space available, a full 54% larger than the OEM core. This large core delivers cool air to the engine under all circumstances, increasing power and torque and simultaneously reducing heat soak.
CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.
Installation is very straight forward and only required basic hand tools:
Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil. Product Details:
Made in Canada from billet T6061 Aluminum
Hard anodized black for stealth and longevity (machined finish shown)
Uses OEM O-ring
Installation of CTS-HW-0242 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
Compatible with OEM Filter
The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.
This part replaces the OE part# 06D 115 408B and 07K 115 408.
Fitment:
MK6 Golf R, MK5 GTI (FSI), 8P Audi A3 (FSI), MK2 Audi TT-S (FSI)
The CTS Turbo Golf R / FSI intake heat shield is designed to mount simply to the factory mounting points. With a brushed aluminium finish this heat shield not only reduces your intake temps, but dresses up the engine bay like no other
IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.
EASY INSTALL BOLT-ON DESIGN NO MODIFICATIONS
ADDS HORSEPOWER UP TO +21HP ON TUNED ENGINES
FLOW OPTIMIZED VELOCITY STACK MOTORSPORT DESIGN
POWER UP
Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.
HIGH-FLOW VELOCITY STACK
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
DESIGN FEATURES
ULTIMATE AIR FLOW
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!
QUALITY COMPONENTS
The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.
EXACT FIT
This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
Sealed heatshield - Separates cold air from engine bay heat
Perfect fitment - No modifications required to bolt-on
Amazing sound - Releases awesome turbo and engine noise
Looks great - Black powder coat, tight clearances, clean angles
AUDI B8 A4 & A5 COLD AIR INTAKE
You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.
At CTS Turbo we are proud to announce our new air intake system for the Audi 3.0T and 3.2L FSI engines. The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our single piece CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air into the the engine providing peak power gains ranging from 5-8HP. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Only for B8 and B8.5 Audi S4/S5/Q5/SQ5 with 3.0T or 3.2L V6 engine!
Product Details: - Mandrel bent aluminum piping with black powder coating - Reusable air filter with inverted cone design - 4 Ply silicon connector with stainless steel clamps - Sealed air box with rubberized trim - Bracketry to prevent rattling under engine torquing - Billet SAI breather adapter and Billet bracket with SAI breather filter - Gains ranging from 5-8HP
This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.
EASY POWER
The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.
DESIGN FEATURES
INCREASED AIR FLOW
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!
HIGH-FLOW VELOCITY STACK
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
PRECISION FIT
This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
QUALITY COMPONENTS
IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.
The IE Audi B9 A4 & A5 2.0T Cold Air Intake is the perfect addition to any engine bay. Give your Audi added horsepower, torque, snappier throttle response, and an aggressive sound. Typical peak gains from our CAI are roughly 10-20 Horsepower and Torque.
POWER GAINS
The ram air design, velocity stack, and massive 55-inchfilter inlet help deliver the most HP possible from a cold intake system.
Expect peak gains of 10-20+HP/TQ on tuned engines.
INCLUDED IN THE B9 IE CAI KIT
IE Intake velocity stack & heatshield assembly
IE Silicone turbo inlet pipe assembly
IE 5” inlet performance air filter
IE Turbo heat shield
All necessary hardware (clamps, nuts, bolts, etc)
INCREASED AIR FLOW
This Intake delivers an impressive flow increase to feed your turbo. More cold air flow means more power; especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.
DESIGN DETAILS
IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your A4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.
HIGH-FLOW VELOCITY STACK
Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.
CUSTOM HEAT SHIELD
IE uses a three piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay. A second heat shield is mounted above the turbocharger to further protect against power robbing heat off the exhaust and turbo.
PERFECT FITMENT
This Intake fits B9 Audi A4 and A5 without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle free fit. Additionally, the stock rubber mounts allow for engine movement which keeps intake components from getting damaged.
CLASSY AND CLEAN APPEARANCE
Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.
The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B9 A4 2.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car.
HORSEPOWER & TORQUE DYNO CHART
HORSEPOWER & TORQUE POWER GAINS OVER STOCK
VEHICLE FITMENT
Audi - A4 2015+ (B9) 2.0T
Audi - A5 2015+ (B9) 2.0T
Audi - A4 Allroad 2015+ (B9) 2.0T
This intake does not fit cars that have a MAF housing/sensor.