Vehicles - CTS Turbo - IROAD - Flow Designs

Description

We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

Product Details:

– Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners

 

Fitment:

• 2015 – current VW Golf (incl Sportwagen and AllTrack)
• 2015 – current VW GTI (incl Rabbit)
• 2015 – current VW Golf R
• 2015 – current Audi A3
• 2015 – current Audi S3
• 2017 – current Audi A4/A5/AllRoad

The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM

CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).

The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.

This kit features press-on style supercharger pulley. Check on your vehicle before ordering!

NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.

VW Polo 6R Gti Front Splitter Kit Includes Splitter 2 Flow Designs Stickers Fitting kit Material 10mm Thick Polyethylene Composite, Bevelled edges Finish HAND POLISHED SATIN BLACK Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable. Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Package price for this set includes:

• i30N Hatch PD front lip splitter & reinforcement brackets
• i30N Hatch PD side skirt splitters
• i30N Hatch PD rear lip spats/pods
• i30N PD Flow-Lock rear diffuser
• All accessories in the i30N Hatch PD range (front extensions, front winglets, side winglets, rear winglets)
  
  

---

INSTALL DOES NOT REQUIRE BUMPER REMOVAL

Please note you are receiving a special price when you purchase the Hyundai i30N Hatch PD complete body kit splitter set.

---

DETAILS

The i30N PD Hatch body kit splitter set includes front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear pods/spats and our full accessories range of front extensions and winglets all round. Easy installation instructions are included and the i30N range does not require bumper removal. We guarantee our i30N body kit splitter set is the most durable on the market and will complete your exterior aesthetic by giving it a more aggressive look.

The i30N body kit range shares the same durability and technology as our renowned WRX, Golf GTI and R and Focus RS line up which is trusted by car enthusiasts worldwide.

All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

KIT INCLUDES

• i30N front lip splitter & Aerospacers
• i30N front splitter reinforcement brackets (pair)
• i30N side skirt splitters (select one or two pairs)
• i30N Flow-Lock rear diffuser & Aerospacers
• i30N rear lip spats/pods & Aerospacers (pair)
• i30N adjustable front extensions (pair)
• i30N adjustable front winglets (pair)
• i30N adjustable side winglets (pair)
• i30N adjustable rear winglets (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL

• Front lip splitter, side skirt splitters, valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges

FINISH

• Hand polished satin black
• Flow-Lock diffuser fins: scratch resistant textured ABS plastic
• CNC engraved logo and features

Preorder Special I30N300: $25 AUD off preorders over $300 AUD I30N600: $50 AUD off preorders over $600 AUD I30N1000: $100 AUD off preorders over $1,000 AUD Limited to the first 15 customers and ends 7 December 2019. Please note all preorders made will be manufactured and shipped after this date. INSTALL DOES NOT REQUIRE BUMPER REMOVAL The i30N front lip splitter will include a pair of stainless steel reinforcement brackets enhancing the overall strength of the splitter. Details Our i30N Hatch (PD) body kit splitter set includes a front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear pods/spats & our full accessories range (winglets & extensions). With easy to follow installation instructions, these extremely durable lip splitters will complete your i30N with a more aggressive look & feel. All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. Brass threads located on each side will for easy installation of our adjustable front winglets and front extensions, creating your own style with our bolt-on accessories range (sold separately). We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today! Kit Includes i30N Hatch PD front lip splitter Pre-mounted adjustable Aerospacers Reinforcement brackets (pair) 2 Flow Designs stickers Fitting kit Material 10mm thick polyethylene composite, bevelled edges Finish Hand polished satin black FAQ Why do you use polyethylene composite for your products? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) How is your splitter so strong? The splitter becomes an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. Pre-assembled Aerospacers are bolted down perpendicularly to create a brace that reinforces the splitter and evenly spreads the load from impacts across the surface. It also allows the front lip splitter to follow the body kit contour to keep it flat and level. What about carbon fibre? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/HYUNDAI_i30N_-_SIDE_SPLITTER_INSTRUCTIONS_pg_1_2.pdf

Preorder Special I30N300: $25 AUD off preorders over $300 AUD I30N600: $50 AUD off preorders over $600 AUD I30N1000: $100 AUD off preorders over $1,000 AUD Limited to the first 15 customers and ends 7 December 2019. Please note all preorders made will be manufactured and shipped after this date. INSTALL DOES NOT REQUIRE BUMPER REMOVAL Details Flow-Lock interlocking system allows for assembly of the diffuser fins without the need for tools or fasteners. With a simple push and click the kit is assembled and ready for installation - this allows for zero exposed hardware giving you the cleanest look for your i30N Hatch rear. No more ugly L-brackets, no additional exposed hardware and no double-sided tape, experience the Flow-Lock difference today! Pre-assembled Aerospacers are bolted down perpendicularly to create a brace that reinforces the rear valance and evenly spreads the load from impacts across the surface. It also allows the diffuser to follow the body kit contour to keep it flat and level. Valance is installed to the car through bolts and nuts while the Flow-Lock diffuser fins simply click and lock into the valance. It is also possible to install when your car is on the ground. Kit Includes i30N Hatch rear diffuser (rear valance and Flow-Lock diffuser fins) 2 Flow Designs stickers Fitting kit Material Valance: 10mm thick polyethylene composite, bevelled edges Flow-Lock diffuser fins: 4.5mm thick textured ABS Finish Valance: Hand polished satin black Flow-Lock diffuser fins: scratch resistant textured ABS plastic CNC engraved logo and features FAQ Why do you use polyethylene composite for your products? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) What about carbon fibre? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. Tell me about ABS plastic! Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/HYUNDAI_i30N_-_REAR_SPAT_INSTRUCTIONS.pdf

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/HYUNDAI_i30N_-_FRONT_BOLT_ON_INSTRUCTIONS.pdf

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/HYUNDAI_i30N_-_FRONT_BOLT_ON_INSTRUCTIONS.pdf