Vehicles

The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

4 Available Analog Readouts 

• Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
• Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
• Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
• Battery voltage (red wire / black wire - read through power and ground wires)

• optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

Optional Add-Ons

• OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
• P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
• LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
• Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...

Analog gauge base kit includes

• Integrated display
• Analog Box control unit
• Main harness
• Hard-wire harness
• Analog boost sensor *boost tap not included
• Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
• 3 zip ties
• 2 scotchlok wire taps

CTS Turbo is proud to announce an official release of our new K04 Upgrade for 2.0T FSI/TSI Transverse Engines. Our engineers designed the compressor cover and exhaust housing to work with the larger K04 CHRA, exactly how intended. While other manufacturers simply install a larger K04 CHRA into a small factory-spec housing. Beware of these hybrid builds, they are not made to provide optimal flow for the larger turbine wheel and can lead to poor performance and premature failure. High-quality castings are CNC machined to replace your factory turbocharger and do not require any additional parts to be installed. All you need to run this K04 2.0T FSI/TSI Transverse Turbocharger Upgrade is a tune for your ECU and a performance downpipe. This kit is by far the best ‘bang for the buck’ modification available for VW and Audi enthusiasts with the 2.0T FSI and 2.0T TSI engine. With proper tuning and supporting mods, this turbo will support 350HP/360TQ! Features: CTS-spec K04 CHRA with heavy-duty thrust bearings Billet compressor wheel (MFS – machined from solid) K04-specific compressor and turbine housing. NOT A HYBRID! OEM+ manufacturing tolerances VSR high-speed balanced Direct-fit factory replacement OEM installation kit included Compatible with any K04-specific tune Compatible with factory turbo outlet pipe (both FSI and TSI). Not compatible with aftermarket stock turbo outlet pipes ROW vehicles, please confirm fitment with your CTS Turbo dealer. Additional parts required: K04-specific software tuning CTS Turbo or other performance downpipe Additional parts recommended: CTS Turbo Cold Air Intake CTS Turbo Direct-Fit Intercooler Kit CTS Turbo High Flow Turbo Outlet Pipe (EA888 only) S3 Fuel Injectors and HPFP upgrade (EA113 engines only)

CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.  In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.

This turbo blanket fits all IHI turbos found on MQB platform cars

IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD

IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro

IS38 Turbos found on the MK7 Golf R and 8V Audi S3

CTS Turbo Blanket Heat Tolerance:

Interior Surface:
Max Temperature Rating: 2100 Deg F
Continuous Use Limit: 1800 Deg F

Exterior Surface:
Direct Contact Limit: 800 Deg F
Radiant Heat Limit: 1200 Deg F

Are you sick and tired of plugging your Apple iPhone into the USB port every time you get into your car. At VW Central we have found the solution for factory fitted vehicles. Simply plug our USB adapter into the factory USB port and it will use Bluetooth to make a wireless connection with your vehicle. Plug and Play. No coding required. Please note this will not work if your vehicle doesn’t already have factory fitted CarPlay functionality. Suitable for VW Vehicles 2016+

Large inside diameter for extremely high flow Cast aluminum with CNC machined flanges Compatible with any intake system, including stock Durable aluminum construction, will not break like factory plastic part Simple installation Includes new o-ring Faster turbo spool, more airflow, improved turbo sound!

---

T304 Seamless Stainless Steel tubing -T304 Stainless Steel flanges -100% TIG Welded -T304 Stainless Steel 02 bung-Stainless Steel Clamps -200 Cell Catalytic converter -Great Sound even with factory exhaust, no drone!!

Mandrel bent aluminum piping with durable black powder coating - CNC machined MAP flange - 4 Ply silicon connectors with stainless steel clamps - Integrated water methanol bung with plug - Stainless steel clamps

Part No:	ES-VW07-KITB
Vehicle Model:	A3, GOLF R, S3
Diameter [in]:	3
Material:	Stainless Steel

Part No: ESKC19VKCS RRP: $1,350.00 Diameter [in]: 3" Material: Stainless Steel Suppliers Product Group: Cat Back System Feature; 3″ Stainless steel pipe work Varex rear Muffler Cat Back system 3.5″ double wall tips Factory secondary cat converter is deleted Smartbox is NOT included Installation instructions Download Installation Instructions