This is a CTS Turbo universal 3″ low profile cone filter, it has a tapered design to fit in tight spots. These filters are used in our MK4 1.8T, 2.0T FSI, 2.oT TSI, B8 A4 intake kits. Also these filters can also be used in a custom big turbo application.
3.0″ Inlet x 8.0″ Long x 5.0″ Wide
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
This is a replacement air filter for CTS Turbo Intake - CTS Turbo 8V.2 RS3 FL / 8S TTRS EVO Intake (2018+)
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
Fitment:
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
CTS Turbo is proud to release our high flow Turbo Muffler delete for the Non-MQB Gen3 EA888.3 1.8TSI and 2.0TSI engines with the stock turbo.
The CTS Turbo Muffler delete is a one-piece design CNC constructed from T6 6061 aircraft-grade aluminum and hard anodized to reduce wear.
Our Turbo Muffler delete replaces the restrictive, power-robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise. By removing the restriction you gain 6-7HP and improve the throttle response!
Our kit installs in 30 minutes with hand tools, fits perfectly and looks great.
For those of you that want optimal power and boost response, the CTS Turbo Gen3 TSI Turbo Muffler Delete is your answer.
NOTE: compatible only with factory Garrett/Honeywell MGT1752S turbo on EA888.3 TSI (turbocharger OE part number 06K145874)
Compatible with factory and CTS Turbo outlet pipes.
NOT FOR MQB VEHICLES!
Fitment:
CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.
These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.
There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.
Generation
Make | Model | Year | Generation |
---|---|---|---|
MERCEDEZ-BENZ | AMG GT 63 | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | AMG GT 63S | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | E63 | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | E63S | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | G63 | 2019 - 2020 | W463 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | C217 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | W222 |
Regular Price: $127.00
Special Price $55.00
To get the most out of your turbo, an upgrade to the intercooler is a must. Made from the best quality tube and fin intercooler cores, Leyo Motorsport’s performance Intercooler provides better flow of air while lowering boost air temperature. This increases the oxygen density that enters the engine which amplifies power and better fuel economy. Leyo intercooler has the following core size 630mm x 413mm x 50mm providing over 60% more volume than OEM intercooler.
*This product is only for use on the race track.
Specifications:
Increased Cooling Capacity.
Increased Flow.
Increased Air Density.
Increase horsepower.
Core size 630x413x50mm
Description:
We heard you ... Ever since the release of our ever popular MK7 GTI Turbo back exhaust we heard the request to chase away the cat. And now here it is, gone is the 200 CEL racing cat, in its place is just the hollow pathway that quickens the exhaust gas's release. Now you can smile even wider every time you mash the gas outside your ex's home.
Specifications:
3’inch 304 stainless steel Downpipe.
Direct bolt on.
Compatible with OEM Downpipe.
Highest TIG hand Welding.
Leak free V band connection.
Description:
LEYO Cold Air Intake System guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed heat shield is also included to prevent heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
*This product is only for use on the race track.
Specifications:
OEM fitment requires no fabrication.
3.5’inch diameter for greater air induction.
Unique quality and design.
Track and dyno proven for greater horsepower gain.
Direct bolt on & easy installation.
Easy installation.
Description:
Directly plugs into the manifold where the factory MAP is located, LEYO Boost Tap provides the most reliable solution to create a vacuum/boost port for boost monitoring. The dual port design offers hassle free multiple boost references with direct installation, no fabrication required.
Specifications:
Dual port boost tap allows for multiple boost references.
CNC machined T6061 aluminum structure.
Heavy-duty screw plug included.