Features

KIA Cerato GT owners worldwide have fallen in love with Xforce Performance Exhaust systems for a reason.

The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Cerato GT. The high qualitymuffler provides a step up in terms of sound from the 1.6 Turbo engine. Experience the Enhanced exhaust sound, crackles & pops that KIA owners love, this Axle-back provides a step up in sound, upgrade to take your KIA Cerato GT to the next level.

• 3″ 304 Stainless steel Mandrel-Bent Pipework
• 3″ inlet – dual 2.5″ Outlet rear muffler
• Quad 3.5″ Double-Wall Slant-Cut Tips
• Straight-through Design for Maximum Performance and Sports Sound
• Fits seamlessly to the factory OEM KIA mounting points.
• All gaskets, Nuts & bolts included for fitment
• Fits Cerato GT (2019-2021), GT Hatch (2019-on), GT HATCH (2022-on), GT Sedan (2019-2021). For 2022 onward sedan use ESKC22AS

Description

STAINLESS STEEL 2.5″ CAT-BACK SYSTEM WITH VAREX MUFFLER

Product Description

Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.

This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak.

Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location.

The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products.

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB

In The Box:
1 x FMFSITVR Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x PCV Adaptor Kit
1 x Blue Spring (Uprated)
10 x Cable Ties
1 x 2000mm Length of 4mm Vac Hose
1 x Instruction Booklet
1 x Forge Keyring and Sticker

If you are unsure if this product is suitable for your application, please contact us.

WHAT IS THE SMART BOX?

 Varex Smart Box is a control device with patent pending technology that let the user to manually and automatically adjust the exhaust sound level of the Varex exhaust.

The users can operate and make change to the settings of the Smart Box via an elegantly designed Smartphone App.

The connections between the Smart Boxes and the smart phones are via the latest Bluetooth® technology, which provides an exceptionally reliable and smooth user experience.

Smart Box provides the following functions:

• MANUAL MODE:

  • Precise manual adjustment of VAREX exhaust valve positions; 
    

  • Custom pre-set of VAREX exhaust valve positions;    
    

                

• MATRIX MODE:(ONLY WORK WITH VEHICLES EQUIPED WITH OBDII)

  • Automatic control of VAREX exhaust valve positions based on real time information of RPM,Throttle, and Speed.

• Polished stainless steel
• Dump Pipe
• 100 cell high flow cat
• Only directly bolts to Xforce cat back system

HYUNDAI I30N

The wait is finally over! Introducing our i30N product range. Built for power and sound, with versatility in mind.

For i30N, we collaborated directly with Hyundai N Performance Australia, E Tuners and i30N owners to produce the best possible output for the exciting new platform. 

Our new range comprises of a Cat Back Exhaust System, Downpipe Kit, Centre Pipe or Rear VAREX Muffler (Which Includes the XFORCE SmartBox). 

Cat Back Exhaust System, featuring: 

* 304 grade stainless steel 

* Varex, giving you variable control of your system

* Kit includes Varex SmartBox for full bluetooth App control 

* Geo mode via SmartBox for the right sound and right place

TIP OPTIONS:

* Optional Shadow Black Chrome Tip Kit  (COMING SOON)

* Optional Titanium Blue Tip Kit                  (COMING SOON)

* Optional Carbon Fibre Tip Kit                   (COMING SOON)

Package Contents

Hyundai I30N 3" 304 Stainless Steel Cat Back with Varex & SmartBox (ES-HY30NVMKSB-CBS)
Hyundai I30N 3" 304 Stainless Steel Front Connecting Pipes Fits OE Front & Rear (ES-HY30N-CBS-1)
Hyundai I30N  East West Varex Rear Muffler With Tips & Smartbox Fits OE Centre (ES-HY30NVMKSB-ABS)