SHIFT FASTER, DRIVE FASTER
The IE DSG Tune for your Audi B8/B8.5 S4/S5 3.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 3.0T into a fully rounded performance monster.
LEADING FEATURES
Lightning fast gear shifts
Higher shift points of 7200 RPM
Multiple launch RPMs: 3400, 3600, 3800, 4000
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Works flawlessly with all IE ECU Tunes
Unlimited launches (factory defaults to 200)
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
WHAT DOES A DSG TRANSMISSION TUNE DO?
IE’s Audi S4 (DL501 S-Tronic) DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features and upgrades are included at one low cost. A great deal of sportiness is added to the tune while maintaining factory smoothness and driveability that you love about the S4. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve dramatically from a larger useable powerband provided by the higher shift points.
REQUIRED FOR SELECT ECU TUNES
Required for S4 & S5 Stage 2 dual pulley files, your new transmission tune will no longer lug the engine in drive mode or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
ONE TUNE FOR ALL STAGES
IE’s DSG tunes are all-inclusive without any expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset for any level of hardware or ECU Tune Stage, one cost and you are covered for all and any future upgrades from Stage 1 to Stage 2 billion.
USER ADJUSTABLE LAUNCH CONTROL
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
Available Launch Control RPMs:
3400 RPM
3600 RPM
3800 RPM
4000 RPM
*Some early model B8 DSG TCUs cannot have launch control added to them, as well as some replacement Mechatronics units. Non compatible TCU codes include, but may not be limited to 8K1927156AC and 8K1927156AD. You can use your IE Powerlink tool to check your TCU code. Other DSG tune features will function normally.
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your supercharged 3.0T engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The B8 and B8.5 S4 is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tunes were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 3.0T engine and transmission. Perfect for all IE Tunes from Stage 1 to dual pulley and throttle upgrades.
VEHICLE FITMENT
Audi - S4 2008-2016 (B8 & B8.5) 3.0T supercharged engines*
Audi - S5 Coupe 2013-2016 (B8.5) 3.0T*
Audi - S5 Cabriolet 2009-2016 (B8-B8.5) 3.0T*
*IE DSG tunes are available only for vehicles equipped with Audi's 7-speed S-Tronic transmissions. Does not function with manual 6-speed transmission cars.
Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.
OBD Multi-Gauge Features:
Boost and Vacuum from OBD2 port
Plug and Play install – just plug into your obd2 port and install into dash!
Optional analog sensor for reading boost on tuned/big turbo cars.
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more!
Optional Auto-Dim or Manual Dimmer
Code Read/Clear
2 x universal 0-5v linear analog inputs
Includes Digital Display, Custom OBD Wire Harness, Control Box.
Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included.
Applicable Models:
Audi TT MK2 / RS
Plug and Play install - just plug into your obd2 port and install into dash!
Reads and clears OBD2 Codes
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
Peak Recall on all functions
Boost and Vacuum from OBD2 port
Optional 80psi analog boost sensor
Optional Auto-Dim or Manual Dimmer
2 x universal 0-5v linear analog inputs
Includes digital display, custom OBD2 wire harness and control box.
Optional 80psi boost sensor
Allows gauge to read boost directly from intake/charge pipe
Plugs directly into the OBD2 harness (no wiring required)
Can be added/removed from the gauge at any time
Tubing kit
Approximately 60" of 5/32" O.D. flexible plastic tubing
5/32" O.D. "T" fitting
3 sections of 5/32" I.D. vacuum hose
OEM vent option not available - Fits both left hand drive and right hand drive vehicles
P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more.
Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
OEM Integration - installs in your vent for a sleek install while retaining air flow
Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
Coolant temperature
Air/Fuel ratio (can be read in AFR or Lambda)
Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
Throttle angle
Ignition timing
Engine RPM
Exhaust gas temperature
Battery voltage
Programmable shift light
Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
Acceleration timers (0-60mph/0-100mph/60-130mph)
Braking timers (60-0mph/100-0mph)
OEM Vent Option
We install the display in an OEM vent to make your install even easier
Optional Add-Ons
P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Need more details?
Check out the V3 install page for configuration and installation info.
This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38
On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.
Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.
IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!
WHAT DOES THE IE AUDI B9 ECU TUNE DO?
Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!
AVAILABLE AUDI 2.0T STAGES
The IE Stage 1 Audi B9 A4 or A5 TSI tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware or to get the most out of your installed intake and intercooler. In a matter of minutes, your new ECU Tune will deliver a massive boost in performance.
Stage 1 recommended hardware -IE Cold Air Intake -IE Intercooler
Looking to maximize the performance of your stock engine and turbo? IE Stage 2 Upgrade fine-tunes the ECU to match installed aftermarket hardware allowing the turbocharger to breath free and improve power gains across the powerband. This is the maximum power available from a stock turbo car.
Required to flash your tune, The IE POWERlink cable gives you control to unlock your engine’s true potential from your own garage or driveway. Quickly reflash your B9 Audi with your choice of ECU Stage through the cars OBD-II port. Upgrade tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via data-logging.
VEHICLE FITMENT
Audi - B9 A4 Quattro 2016+ with 2.0T engine*
Audi - B9 A5 Quattro 2016+ with 2.0T engine*
Audi - B9 A4 Quattro Allroad 2017+ with 2.0T engine*
*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.