Vehicles

Product Description

Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.

This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak.

Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location.

The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products.

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB

 

In The Box:
1 x FMFSITVR Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x PCV Adaptor Kit
1 x Blue Spring (Uprated)
10 x Cable Ties
1 x 2000mm Length of 4mm Vac Hose
1 x Instruction Booklet
1 x Forge Keyring and Sticker

If you are unsure if this product is suitable for your application, please contact us.

VW has encountered a problem with the FSI camshaft and cam follower that could lead to damage to your engine's cylinder head.

This small part can play quite a big role in your engine's well-being. It conveys the movement of your camshaft into power for the high pressure fuel pump by riding directly on the camshaft lobe.

 If it becomes worn to the point of breaking it can cause permanent damage to the camshaft, fuel pump, or both. It could also send metal particles into your cylinder head which can cause damage to moving parts. Without replacement, it is common for followers to have holes worn through them.

Replacing this follower as a form of preventative maintenance can save you from spending even more money and time replacing your fuel pump or camshaft from damage caused by a worn follower.

Genuine Volkswagen USB AUX Switch for CarPlay & Auto Android Adapter Plug Socket

This USB/AUX Adapter is designed for MIB 2 & MIB 2.5 Radio Control Units. This adapter is required for Pre-2016 Vehicles to allow CarPlay and Auto Android connectivity.

Compatible with:

Most commonly used to eliminate battery drain issues in Pre-2009 model Volkswagen cars when upgrading the radio to a later model such as the RNS510, RCD510 ,RCD330, RCD340 etc.

The Canbus Gateway Module, will require coding using software such as VCDS or OBDII. 

Installation instructions: https://www.my-gti.com/2296/can-bus-gateway-removing-installing-and-upgrading-volkswagen-golf

Do it right the first time and only purchase a Genuine VW reverse camera. 
This flip badge reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B.

Volkswagen Original Rear Emblem Camera KIT Composite(AV) Output Compatible with: 

• VW Golf MK5
• VW Golf MK6
• VW Polo 6R / 6C (Bracket Required)
• VW Passat B7/B8 (Sedan Only)
• VW T-Roc

See behind your car with a camera in your boot.

A camera at the back of your car shows you what's behind to make reversing safer and easier.

Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.

The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.

Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.

Compatible with head unit :
VW Genuine RCD330 / RCD340 - 6RD035187B
VW Genuine Discover Media
VW Genuine Discover Pro
Radiosystem: Composition Media
Not compatible with Composition Media radios with the following part numbers :
5G0035820
5G0035819
5G0035812

Please note: VAS / OBD11 / VCDS Coding is required after installation. 
Professional Installation is recommended, we do not provide installation assistance for this product. 

FAQ's
Does this flip badge camera work with the RCD330?
Yes! It certainly does, no delay timer or AV converter box required. 
What is included in this kit?
The Genuine VW Flip Badge Reverse Camera & Wiring Harness
Will this camera work with an RCD510/RNS510 or RNS315 Radio?
No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)

Do it right the first time and only purchase a Genuine VW reverse camera. This boot handle reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B. Volkswagen Original Boot Lid Camera KIT Composite(AV) Output Compatible with: * VW Golf MK6 Wagon (2010-2013) * VW Tiguan 5N (2007 - 2014) * VW Passat B6 & B7 (Wagon) (2005-2014) * VW Jetta 1K & 5C (2005-2012) See behind your car with a camera in your boot lid. A camera at the back of your car shows you what's behind to make reversing safer and easier. Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot. The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking. Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer. Compatible with head unit : VW Genuine RCD330 / RCD340 - 6RD035187B VW Genuine Discover Media VW Genuine Discover Pro Radiosystem: Composition Media Not compatible with Composition Media radios with the following part numbers : 5G0035820 5G0035819 5G0035812 Please note: VAS / OBD11 / VCDS Coding is required after installation. Professional Installation is recommended, we do not provide installation assistance for this product.  FAQ's Does this camera work with the RCD330? Yes! It certainly does, no delay timer or AV converter box required.  What is included in this kit? The Genuine VW Handle Reverse Camera & Wiring Harness Will this camera work with an RCD510/RNS510 or RNS315 Radio? No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below) 

The Volkswagen Composition Media PQ system combines the best  multimedia entertainment in an easy to use touch screen unit.

The built-in proximity sensors ensures maximum use of the 6.5” screen by hiding the function buttons not being used and only displaying them when the user moves their hand close to the screen.

The system offers hands-free calling from mobile phones via Bluetooth as well as Audio Streaming (A2DP) of tracks wirelessly.

With a built-in FM/AM tuner, Disc drive (CD & MP3), SD card reader and (optional) USB/iPod ports, there is no shortage of entertainment sources for a more pleasurable drive.

Voice Activation allows hands-free use of the system by simply speaking commands and therefore ensuring safer driving.

App-Connect is a major highlight of the Composition Media PQ System. Volkswagen is one of the first manufacturers to offer a system that is compatible with the most common smartphone integration interfaces: Apple Car-Play & Android Auto.

This ensures integration of virtually any type of smartphone.                                                         

Once connected, the touchscreen layout will resemble the screen of your device making it easier to use.

- Component Protection Unlocked

- Voice Control Activated

- Support for Apple CarPlay and Android Auto

- SD Card Slot

- Quadlock Adapter for older model cars, including USB Port & Wiring Harness

Supported PQ Platform Vehicles:

• Amarok
• Beetle
• Caddy
• Golf
• Jetta
• Scirocco
• Tiguan
• Transporter
• Multivan

Features & Specifications:

• 6.5″ touchscreen colour display with proximity sensor
• CD drive MP3/WMA
• Music playback from MP3, WMA files with title display from SD
• USB, SD (Aux and USB require optional connection cable)
• FM and AM radio reception
• 4 x 20 watt output (front and rear speakers)
• Bluetooth connection for phone and media (HFP, A2DP)
• App-Connect (Apple CarPlay & Android Auto)
• Voice Control

Package Contents:

• Genuine VW Composition Media Unit
• PQ Quadlock Harness Adapter 
• Microphone with Harness
• CarPlay USB/AUX Port with Wiring Harness
• Antenna Adapter & Harness

Do it right the first time and only purchase a Genuine VW reverse camera. 

This VW Scirocco reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B.

Volkswagen Original Camera KIT Composite(AV) Output Compatible with:
• VW Scirocco R (2009 - 2017)

A camera at the back of your car shows you what's behind to make reversing safer and easier.

Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.

The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.
Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.

Compatible with head unit :

• VW Genuine RCD330 / RCD340 - 6RD035187B
• VW Genuine Discover Media
• VW Genuine Discover Pro
• Radiosystem: Composition Media
• Not compatible with Composition Media radios with the following part numbers :
• 5G0035820
• 5G0035819
• 5G0035812

Please note: VAS / OBD11 / VCDS Coding is required after installation. 

Professional Installation is recommended, we do not provide installation assistance for this product. 

FAQ's

• Does this camera work with the RCD330? - Yes! It certainly does, no delay timer or AV converter box is required. 
• What is included in this kit? - The Genuine VW Handle Reverse Camera & Wiring Harness
• Will this camera work with an RCD510/RNS510 or RNS315 Radio? - No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)