Vehicles

Turbosmart’s latest Kompact valve kit has been developed as a direct plug-and-play solution for the new C63 AMG.

Despite its high-performance intentions, the Mercedes’ standard bypass valves are plastic units that bleed boost and struggle to cope with the pressure, particularly in tuned vehicles. 

Turbosmart’s Kompact kit for the C63 comes with two billet aluminium valves that are a direct fit replacement for the factory diverter valves.

The Kompact holds boost in better than the factory valves, and can never be overcome by boost. The result is more efficient performance from the factory turbochargers, as well as the crisp sound of a piston-style BOV.

For those who want blow-off valve sound, the Dual Port both vents-to-atmosphere as well as recirculates air, while the Plumb Back is 100% recirculating for quiet, OEM-style operation. 

Unlike the factory valves, the Turbosmart replacement kit is mechanically controlled by manifold pressure, meaning the valves open when you want them to, not when a computer decides they should.

This puts control back in the hands of the driver, and ensures the valves do not release boost when they shouldn’t.

Turbosmart’s latest Kompact valve kit has been developed as a direct plug-and-play solution for the new C63 AMG.

Despite its high-performance intentions, the Mercedes’ standard bypass valves are plastic units that bleed boost and struggle to cope with the pressure, particularly in tuned vehicles. 

Turbosmart’s Kompact kit for the C63 comes with two billet aluminium valves that are a direct fit replacement for the factory diverter valves. The Kompact holds boost in better than the factory valves, and can never be overcome by boost.

The result is more efficient performance from the factory turbochargers, as well as the crisp sound of a piston-style BOV. For those who want blow-off valve sound, the Dual Port both vents-to-atmosphere as well as recirculates air, while the Plumb Back is 100% recirculating for quiet, OEM-style operation. 

Unlike the factory valves, the Turbosmart replacement kit is mechanically controlled by manifold pressure, meaning the valves open when you want them to, not when a computer decides they should.

This puts control back in the hands of the driver, and ensures the valves do not release boost when they shouldn’t.

OEM Drive Mode Factory Control 3 pin PWM to VAREX Smartbox.

Are you looking to add a little more control and customization to your Varex equipped exhaust system? Look no further! We are excited to announce the release of our Drive Mode feature for our Varex Smartbox controller unit.

This feature will allow you to control your Varex equipped exhaust system from the OEM Drive Mode vehicle controls, making it easier and more convenient than ever before.

P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? 
  
• OEM Integration - installs the dash and cluster trim for a sleek install
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Engine oil temperature (GTI and Golf R)
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)

Optional Add-Ons

• P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
• Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
• P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
• Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
• OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

You asked, we answered.

The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.

No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Electronics in a harsh climate? We've got that covered too.

We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

This product will only bolt directly to an Xforce axle back system.

• 3" dump pipe from turbo
• 100 cell high flow cat
• "3 connector pipe with resonator
• Will only bolt directly to an Xforce axle back system