Vehicles - H&R Springs - XFORCE - P3 Cars - Ingo Noak - Autotech
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.
OBD Multi-Gauge Features:
Boost and Vacuum from OBD2 port
Plug and Play install – just plug into your obd2 port and install into dash!
Optional analog sensor for reading boost on tuned/big turbo cars.
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more!
Optional Auto-Dim or Manual Dimmer
Code Read/Clear
2 x universal 0-5v linear analog inputs
Includes Digital Display, Custom OBD Wire Harness, Control Box.
Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included.
Applicable Models:
Audi TT MK2 / RS
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Optional Add-Ons
- OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
- P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
- LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
- Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Optional Add-Ons
- OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
- P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
- LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
- Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Sale
Description
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reduced to 3″
- Flex bellows before hanger
- 100 cell high flow performance catalytic converter
- Designed to fit to factory cat back systems
- Requires ECU tuning
Fits the following;
- Audi 8P S3
- Audi 8P A3 2.0T
- Golf MK6 R
Part No: |
ES-VW07-KITB |
Vehicle Model: |
A3, GOLF R, S3 |
Diameter [in]: |
3 |
Material: |
Stainless Steel |
Regular Price:
$1,000.00
Special Price
$880.00
Sale
Part No:
ESKC19VKCS
RRP:
$1,350.00
Diameter [in]:
3"
Material:
Stainless Steel
Suppliers Product Group:
Cat Back System
Feature;
3″ Stainless steel pipe work
Varex rear Muffler
Cat Back system
3.5″ double wall tips
Factory secondary cat converter is deleted
Smartbox is NOT included
Installation instructions
Download Installation Instructions
Regular Price:
$1,599.00
Special Price
$1,409.00
Sale
Description
Polished Stainless Steel Cat-Back System With Twin 2.5″ Piping Varex Rear Mufflers
Features
- Twin 2.5″ Cat-Back system;
- Twin Hot-Dog style center resonators;
- Slip joint design centre section
- Polished stainless 304 grade
- Varex rear mufflers
Part No: |
ES-KS17-VMKCBS |
Vehicle Model: |
STINGER GT |
Diameter [in]: |
2.5 |
Material: |
Stainless Steel |
Regular Price:
$2,250.00
Special Price
$1,980.00
Sale
Resonator delete pipe in factory standard sizing
Features
- Resonator delete pipe
- Clamp & GASKETS included
- 2.5″ size
- Only suits factory standard rear muffler
Part No: |
ESHY31RDP |
Vehicle Model: |
CERATO, i30 |
Diameter [in]: |
2.5" |
Material: |
304 Stainless Steel
|
Regular Price:
$385.00
Special Price
$338.00
Description
Non-Polished Stainless Steel 4″ Dump & Cat Kit
Features
- 2.5″ dump pipe
- 200 cell high flow race cat
- Euro style mesh flex bellows
- Non polished stainless steel
- Will bolt to factory standard cat back system
- Tune is recommended after fitment
Part No: |
E2G4FJKITB |
Vehicle Model: |
CERATO, i30 |
Diameter [in]: |
2.5" |
Material: |
Stainless |
Sale
Description
Varex Dual 3" Cat Back System
Features
Let your twin-turbo S58 sing with our VAREX Valve equipped exhaust system to suit the BMW G80 M3 and G82 M4 Engineered with 3” 304 stainless steel with quad 4” tip outlets, this system projects a symphony like no other. Not only will your M sound the best, it will look the part as well. Designed for the spirited driver seeking a performance exhaust solution with user-adjustable sound control, our system for the G80 M3 completely transforms your behind-the-wheel experience.
- Dual 3” VAREX Cat Back System.
- Mandrel Bent 304 Stainless Steel Brushed Finish.
- Dual 2.75″ OEM Inlet to Dual 3″ Pipework with V-Band Flanged Clamping System for ease of installation and future serviceability.
- Single East-West Dual 3″ Inlet VAREX™ Muffler with Dual VAREX™ valves.
- Quad 3″ Outlet with Polished Double Wall Angle 4″ Tips with bolt on installation
Regular Price:
$4,749.00
Special Price
$4,179.00
Description
Hyundai Kona N 3" Varex Catback System
Features
Are you ready to take your Hyundai Kona N to the next level?
Here at Xforce, we have fallen in love with the Hyundai N range of vehicles. As soon as we tested our first cat back system we knew how special these Hyundai Kona N vehicles are.We’ve spent countless hours in design,development and testing on each Hyundai N Vehicle to ensure the absolute best performance and sound is achieved.We even have a few Hyundai N and N-line vehicles in our staff carpark!
With our new Varex Valved cat back system, get ready to let your engine roar,crackle and pop like it should while offering the ability to take it back a notch when you need the sophistication that you come to expect from a Hyundai N.
Our patented Varex Valved muffler with vehicle-specific internal design adds a high-quality increased performance sound when in the open position whilst delivering quiet and calm when you need it.
To finish things off our 4.5” double wall polished tips compliment the rear of the vehicle perfectly.
We know you will love this system just as we did in developing it.
To take it to the next level, add a Smartbox for the ultimate in control using our patented Bluetooth smartphone app to provide pre-set automatic valve control, geo fencing and more.Drive mode integration is available with the Smartbox by using our BiModal intergration cable part #BMC01.
- 304 Stainless Steel
- Tig Welded construction
- 3″ Brushed finish tubing
- Patented Varex Valved rear Muffler
- 4.5″ Double walled stainless steel tips
- All gaskets,nuts & bolts included for fitment